no

Negate a command or set its defaults

l2rib

Layer 2 routing information base

dup-host-mac-detection

Set Duplicate-Host-MAC-Detection parameters

num-of-moves

Number of host moves to be allowed

duration

Duplicate detection timeout in secs for host moves

no

Negate a command or set its defaults

l2rib

Layer 2 routing information base

dup-host-mac-recovery

Set Duplicate-Host-MAC-Recovery (Unfreeze) parameters

timeout

Unfreeze timeout (secs)

retry-count

Unfreeze retry count

l2rib

Layer 2 routing information base

event-history

Set event-history size for L2RIB

client-tbl

L2RIB Client, Producer, Consumer Tables Event Logs

ead-pl

L2RIB EAD, Path-List Objects Event Logs

errors

L2RIB Error Logs

mac

L2RIB MAC Object Event Logs

mac-ip

L2RIB MAC Object Event Logs

misc-obj

L2RIB IMET, Flood-List, ARP-Signal, Peer ID, Startup-Routes Objects Event Logs

rmac

L2RIB Router MAC Object Event Logs

topology

L2RIB Topology Object Event Logs

tx-infra

L2RIB TxList, TxSend, TxThread Event Logs

server

L2RIB Sysmgr, PSS, HA Logs

size

Size

default

Default (Low)

medium

Medium

high

High

very-high

Very High

no

Negate a command or set its defaults

l3-device-group

PLB L3 device group

name

PLB L3 device group name

no

(Optional) Negate a command or set its defaults

l3vm

Debug L3VM information

event-history

log debug events into event history buffer

pss

L3VM pss operation

errors

L3VM errors

mts

L3VM MTS messages

reinit

L3VM reinit events

cli

Log L3VM CLI related events

vrf

Log VRF related events

topology

Log Topology related events

size

Configure the size of the event-hist buffer

size_in_text

Buffer size

size_in_Kbytes

Size of the file in kbytes

no

(Optional) Negate a command or set its defaults

label-allocation-mode

Configure label allocation mode

per-vrf

per VRF label allocation mode

no

(Optional) Negate a command or set its defaults

label

LDP label configuration

allocate

Allocate local labels

global

Specify default VPN Routing/Forwarding instance

all-routes

Allocate local labels for all routes

host-routes

Allocate local labels for host routes only (default)

prefix-list

Specify a prefix-list for local label filtering

pfx-list

IP prefix-list for destination prefixes

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

fast-select-hot-standby

Configure fast select for hot standby ports. Enabling this feature will allow fast selection of hot standby port when last active port in the port-channel is going down.

no

(Optional) Negate a command or set its defaults

lacp

Set LACP parameters for the interface

mode

Enter the LACP mode

delay

Configure delayed lacp on the port-channel

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

port-priority

Set LACP port priority

port-pri

Enter port priority

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

rapid-transition

Optimizes LACP timers for rapid transition from P->I, I->P state

lacp

Set LACP parameters for the interface

rate

Configure rate at which PDUs are sent by LACP

rate_type

Rate type

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

rate

Configure rate at which PDUs are sent by LACP

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

system-priority

Set LACP system priority

sys-pri

Enter System Priority

|

Pipe command output to filter

last

Display last lines

lines

(Optional) number of lines to print

layer2-switched

Configure L2 features

flow

NetFlow related commands

monitor

Apply a Flow Monitor to this interface

monitorname

Name of Flow Monitor

input

Apply Flow Monitor on input traffic

sampler

(Optional) Optional Sampler to apply to this Flow Monitor

samplername

(Optional) Name of Sampler

no

Negate a command or set its defaults

layer3

Enable layer 3 functionality

peer-router

no change for TTL of packets destined to the peer

no

Negate a command or set its defaults

layer3

Enable layer 3 functionality

peer-router

no change for TTL of packets destined to the peer

syslog

print layer 3 protocol syslog

interval

(Optional) how frequent to print the syslog

syslog-interval

(Optional) how many seconds to print a syslog

no

Negate a command or set its defaults

ldap-search-map

Set one of the configured search-map as active

ldap-search-map

Set one of the configured search-map as active

s0

Name of the search-map

no

(Optional) Negate a command or set its defaults

ldap-server

Configure LDAP related parameters

deadtime

Global LDAP server deadtime period in seconds

i0

LDAP server deadtime period in minutes (default 0 mins -disabled)

no

(Optional) Negate a command or set its defaults

ldap-server

Configure LDAP related parameters

host

LDAP server's DNS name or IP address

hostipname

IPV4/IPV6 address or DNS name

enable-ssl

(Optional) LDAP server enable ssl

port

(Optional) LDAP server's port (default: global config)

i1

(Optional) port number

timeout

(Optional) LDAP server timeout period in seconds

i2

(Optional) LDAP server timeout in seconds (default: global config)

rootDN

(Optional) LDAP server root DN

s0

(Optional) root DN

password

(Optional) LDAP server root password

7

(Optional) LDAP root password (encrypted)

s1

(Optional) password (encrypted)

port1

(Optional) LDAP server's port (default: global config)

i3

(Optional) port number

timeout1

(Optional) LDAP server timeout period in seconds

i4

(Optional) LDAP server timeout in seconds (default: global config)

s2

(Optional) password (clear text)

port2

(Optional) LDAP server's port (default: global config)

i5

(Optional) port number

timeout2

(Optional) LDAP server timeout period in seconds

i6

(Optional) LDAP server timeout in seconds (default: global config)

timeout3

(Optional) LDAP server timeout period in seconds

i7

(Optional) LDAP server timeout in seconds (default: global config)

timeout4

(Optional) LDAP server timeout period in seconds

i8

(Optional) LDAP server timeout in seconds (default: global config)

timeout5

(Optional) LDAP server timeout period in seconds

i9

(Optional) LDAP server timeout in seconds (default: global config)

username

(Optional) <s0>

no

(Optional) Negate a command or set its defaults

ldap-server

Configure LDAP related parameters

host

LDAP server's IP address

hostipname

IPV4/IPV6 address or DNS name

test

Parameters to send test packets

7

(Optional) LDAP test password (encrypted)

s0

(Optional) user name

password

(Optional) user password in test packets

s1

(Optional) test password

s2

(Optional) test password (encrypted)

rootDN

rootDN in test packets

r1

root DN

idle-time

(Optional) time interval for monitoring the server

i1

(Optional) time period in minutes

no

(Optional) Negate a command or set its defaults

ldap-server

Configure LDAP related parameters

port

Global LDAP server's port (default 389)

i0

port number

no

(Optional) Negate a command or set its defaults

ldap-server

Configure LDAP related parameters

timeout

Global LDAP server timeout period in seconds

i0

LDAP server timeout period in seconds (default 5 sec)

no

(Optional) Negate a command or set its defaults

ldap

Configure information about ldap

search-map

Configure the search-map

s0

Search Map Name

|

Pipe command output to filter

less

Filter for paging

-d

(Optional) dumb terminal

-E

(Optional) quit at end of file

license

Enter the license configuration mode

expiry

Configure the expiry check interval

check_interval

Configure the expiry check interval

i0

Specify the license expiry check interval in seconds

no

(Optional) Negate a command or set its defaults

license

Modify license features

grace-period

Configure grace period support for licenses

license

Enter the license configuration mode

grace-period

Configure the grace period

days

Congigure the grace period in days

i0

Number of days

license

Enter license configuration mode

grace-period

Configure the grace period

seconds

Configure the grace period in seconds

i0

Specify the grace period in seconds

license

Enter the license configuration mode

grace

Configure the grace period

period

Specify the grace period in days

i0

no

(Optional) Negate a command or set its defaults

license

Display licensing information

reserve

Reserve the licenses for the specified module

count

Count of licenses to reserve

i0

Count of licenses

package

Name of the license package to reserve

license-feature

Name of the license package

module

Module number

i1

Module number

no

Negate a command or set its defaults

limit-resource

Resource configuration

m4route-mem

set ipv4 route memory limits

minimum

(Optional) minimum route memory to allocate

min

(Optional) minimum route memory value

min-hi

(Optional) minimum route memory value

maximum

maximum route memory to allocate

max-lo

maximum route memory value

max

maximum route memory value

max-hi

maximum route memory value

equal-to-min

maximum value equal to min

no

Negate a command or set its defaults

limit-resource

Resource configuration

m6route-mem

set ipv6 route memory limits

minimum

(Optional) minimum route memory to allocate

min

(Optional) minimum route memory value

min-hi

(Optional) minimum route memory value

maximum

maximum route memory to allocate

max-lo

maximum route memory value

max

maximum route memory value

max-hi

maximum route memory value

no

Negate a command or set its defaults

limit-resource

Resource configuration

module-type

Controls which type of modules are allowed in this vdc

card-type

Allowed module types

limit-resource

Resource configuration

monitor-session-erspan-dst

Monitor erspan destination session

minimum

minimum monitor erspan-dst session to allocate

min-val

minimum monitor erspan-dst session value

maximum

maximum monitor erspan-dst session to allocate

max-val

maximum monitor erspan-dst session value

equal-to-min

set maximum value equal to min

limit-resource

Resource configuration

monitor-session-inband-src

Monitor inband source

minimum

minimum monitor inband source to allocate

min-val

minimum monitor inband source value

maximum

maximum monitor inband source to allocate

max-val

maximum monitor inband source value

equal-to-min

set maximum value equal to min

limit-resource

Resource configuration

monitor-session

Monitor local/erspan-source session

minimum

minimum monitor local session to allocate

min-val

minimum monitor local session value

maximum

maximum monitor local session to allocate

max-val

maximum monitor local session value

equal-to-min

set maximum value equal to min

no

Negate a command or set its defaults

limit-resource

Resource configuration

port-channel

set port-channel limits

minimum

minimum port-channels to allocate

min-val

maximum

maximum port-channels to allocate

max-val

equal-to-min

set maximum value equal to min

no

Negate a command or set its defaults

limit-resource

Resource configuration

u4route-mem

set ipv4 route memory limits

minimum

(Optional) minimum route memory to allocate

min-lo

(Optional) minimum route memory value

min

(Optional) minimum route memory value

min-hi

(Optional) minimum route memory value

maximum

maximum route memory to allocate

max-lo

maximum route memory value

max

maximum route memory value

max-hi

maximum route memory value

equal-to-min

maximum value equal to min

no

Negate a command or set its defaults

limit-resource

Resource configuration

u6route-mem

set ipv6 route memory limits

minimum

(Optional) minimum route memory to allocate

min-lo

(Optional) minimum route memory value

min

(Optional) minimum route memory value

min

(Optional) minimum route memory value

min-hi

(Optional) minimum route memory value

maximum

maximum route memory to allocate

max-lo

maximum route memory value

max

maximum route memory value

max-hi

maximum route memory value

equal-to-min

maximum value equal to min

no

Negate a command or set its defaults

limit-resource

Resource configuration

vlan

set VLAN limits

minimum

minimum VLANs to allocate

min-val

minimum VLANs value

maximum

maximum VLANs to allocate

max-val

maximum VLANs value

equal-to-min

set maximum value equal to min

no

Negate a command or set its defaults

limit-resource

Resource configuration

vrf

set vrf resource limits

minimum

minimum vrf resources to allocate

number1

minimum vrf resource value

maximum

maximum vrf resources to allocate

number2

maximum vrf resource value

equal-to-min

set maximum value equal to min

no

(Optional) Negate a command or set its defaults

line

Configure a terminal line

console

Primary terminal line

no

(Optional) Negate a command or set its defaults

line

Configure a terminal line

console

Primary terminal line

line

Configure a terminal line

vty

Virtual terminal line

no

Negate a command or set its defaults

line

Configure a terminal line

vty

Virtual terminal line

no

Negate a command or set its defaults

link-management

Link Management configuration

timers

Link Management timers configuration

bandwidth-hold

Link Management bandwidth hold timer

bw_seconds

seconds

periodic-flooding

Link Management periodic flooding interval

flood_seconds

seconds [0 to disable, minimum set to 30]

no

Negate a command or set its defaults

link

Configure link

debounce

Configure link debounce timer

time

(Optional) Link debounce time

time_val

(Optional) Timer value (in milliseconds)

lisp-lig

LISP Internet Groper

lig

LISP Internet Groper

eid

LIG on a IPv4 Endpoint ID (EID)

version

Display Internet Draft version lig supports

self

Test if IPv4 EID-prefix registered in mapping database

self6

Test if IPv6 EID-prefix registered in mapping database

hostname

DNS name for Endpoint ID (EID)

source

(Optional) Provide source EID for Map-Request

seid

(Optional) Source IPv4 Endpoint ID (EID)

to

(Optional) Where to send the Map-Request

mr-hostname

(Optional) DNS name for Map-Resolver

mr

(Optional) Map-Resolver IPv4 address to send Map-Request to

count

(Optional) Map-Requests to send before Map-Reply returned

count

(Optional) Number of Map-Requests

probe

(Optional) RLOC-probe each locator

vrf

(Optional) LIGing for specific VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configures a LISP-DDT mapping system functionality

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

authoritative-prefix

Configure EID-prefix this LISP-DDT node is authoritative for

instance-id

Instance ID of VPN for EID-prefix

iid

Instance-ID value

star

Authoritative prefix on root for all address space

iidp

Instance-ID in prefix format

range

Instance-ID range in 'x-y' format where y > x

eid-prefix

Authoritative IPv4 or IPv6 EID-prefix

eid-prefix

EID-prefix in IPv4 slash format

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

delegate

Configure LISP-DDT child in delegation hierarchy

node

IPv4 locator address of DDT node

instance-id

Instance ID of VPN for EID-prefix

iid

Instance-ID value

iidp

Instance-ID in prefix format

range

Instance-ID range in 'x-y' format where y > x

eid-prefix

Child delegration for IPv4 or IPv6 EID-prefix

eid-prefix

EID-prefix in IPv4 slash format

priority

(Optional) Configures which Locators from a set are preferred

priority

(Optional) Lower priority Locator takes preference

weight

(Optional) Traffic load-spreading among Locators

weight

(Optional) Specified in a percentage from 0 to 100

map-server

(Optional) Child delegate is a Map-Server

public-key

(Optional) DDT child's public key this DDT-node supplies for referrals

key

(Optional) RSA public-key

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

inherit-referrals

Inherit map-server referrals from parent DDT-node

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

map-server-peer

Configure other map-server peers

node

IPv4 locator address of DDT node

instance-id

Instance ID of VPN for EID-prefix

iid

Instance-ID value

iidp

Instance-ID in prefix format

range

Instance-ID range in 'x-y' format where y > x

eid-prefix

Child delegration for IPv4 or IPv6 EID-prefix

eid-prefix

EID-prefix in IPv4 slash format

priority

(Optional) Configures which Locators from a set are preferred

priority

(Optional) Lower priority Locator takes preference

weight

(Optional) Traffic load-spreading among Locators

weight

(Optional) Specified in a percentage from 0 to 100

public-key

(Optional) DDT child's public key this DDT-node supplies for referrals

key

(Optional) RSA public-key

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

private-key

Configures LISP-DDT private-key for signing Map-Referral messages

key

RSA private-key

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

root

Configure LISP-DDT root of tree in Map-Resolver

root

IPv4 locator address of DDT root

public-key

(Optional) DDT root's public key used to verify signed Map-Referrals

key

(Optional) RSA public-key

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

dont-prime-map-cache

Do not send Map-Requests for arbitrary EIDs to prime map-cache

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

dynamic-eid

Configure dynamic-EIDs for roaming

dyn-eid-name

Name your dynamic-EID

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

dynamic-eid

Configure dynamic-EIDs for roaming

dyn-eid-name

Name your dynamic-EID

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

explicit-locator-path

Configures a LISP Explicit Locator Path (ELP)

elp-name

Name of LISP ELP

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

explicit-locator-path

Configures a LISP Explicit Locator Path (ELP)

elp-name

Name of LISP ELP

no

(Optional) Negate a command or set its defaults

lisp

LISP interface configuration commands

extended-subnet-mode

Create dynamic-EID state when EIDs reside on their home subnet

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

geo-coordinates

Configure Geo Coordinates for this router

latitude

Latitude in DMS format: 'degree-min-sec-N' or 'degree-min-sec-S

longitude

Longitude in DMS format: 'degree-min-sec-E' or 'degree-min-sec-W format

altitude

(Optional) Altitude in meters above sea-level

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ignore-smr

Do not respond to SMRs when no map-cache entry exists

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

instance-id

Configures Instance-ID for global data-mappings

iid

24-bit instance-ID value

no

(Optional) Negate a command or set its defaults

lisp

LISP debug commands

internal

LISP internal configuration commands

event-history

Configure LISP event log

lisp-event-hist

Configure LISP event log

size

Size of buffer

size_in_text

Buffer size

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

loc-reach-algorithm

Configure locator reachability algorithm

count-tcp

Count TCP SYNs and ACKs

echo-nonce

Request for nonce to echo back in data-plane

rloc-probing

Probe each high-priority RLOC with Map-Request as last resort

map-request-on-failure

(Optional) Send Map-Request to database mapping system when any RLOC for a map-cache entry becomes RLOC-probing unreachable

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

merge-registrations

ETRs merge registrations from Map-Notify messages

site-id

Configure site-id value for each xTR at site

site-id

Site-ID to group xTRs together

no

(Optional) Negate a command or set its defaults

lisp

LISP interface configuration commands

mobility

Configures to allow EID mobility on interface

dyn-eid-name

Name of the dynamic-EID to use

no

(Optional) Negate a command or set its defaults

lisp

LISP interface configuration commands

mobility

Configures to allow EID mobility on interface

test-liveness

Ping discovered dyn-eid hosts on this interface periodically to determine host liveness

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

mtu

Configure the Max MTU value that LISP path will support

mtu

mtu

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

security

Configure LISP-SEC on ITR or PITR

strong

(Optional) Reject Map-Replies without LISP-SEC signatures included

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

site

Configures LISP sites in a map-server

site-name

Name your LISP site

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

site

Configures LISP sites in a map-server

site-name

Name your LISP site

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

smr-local-locators

Send SMR to all locators for in local site

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

smr-locators

Send SMR to all RLOCs in locator-set for map-cache entry

lisp-rig

LISP-DDT Referral Internet Groper

rig

LISP-DDT Referral Internet Groper

instance-id

(Optional) Instance-ID of VPN EID resides in

iid

(Optional) 24-bit instance-ID value

eid

RIG on a IPv4 Endpoint ID (EID)

hostname

DNS name for Endpoint ID (EID)

to

Where to send the Map-Request

ddt-hostname

DNS name for DDT-node

ddt

DDT-node IPv4 address to send Map-Request to

list

Re-list all or part of the explicit path entries

index

(Optional) List starting at entry index number

list

Re-list all of the attribute list entries

listobject-boolean

Configure Object as member of tracking list

object-id

Tracked object

not

Negate Up status

no

Negate a command or set its defaults

listobject-weight

Configure Object as member of tracking list

object-id

Tracked Object

weight

Assign a weight to object

weight-val

Assign a weight to object

threshold-weight

Threshold parameters

weight-thresh

Weight threshold

weightup

Up threshold

up-weight

Up threshold weight

weightdown

(Optional) Down threshold

down-weight

(Optional) Down threshold weight

no

(Optional) Negate a command or set its defaults

listobject

Configure Object as member of tracking list

object-id

Tracked Object

no

(Optional) Negate a command or set its defaults

lldp

Configure global LLDP parameters

holdtime

Specify the holdtime (in sec) to be sent in packets

i0

holdtime in sec

reinit

Delay (in sec) for LLDP initialisation on any interface

i1

reinit in sec

timer

Specify the rate at which LLDP packets are sent (in sec)

i2

rate of packets in sec

portid-subtype

config portid subtype for LLDP TLV and SNMP MIBs

i3

0: long interface name (default), 1: short interface name

tlv-select

Selection of LLDP to send

management-address

Management Address TLV

port-description

Port Description TLV

port-vlan

Port Vlan ID TLV

system-capabilities

System Capabilities TLV

system-description

System Description TLV

system-name

System Name TLV

dcbxp

DCBXP TLVs

no

(Optional) Negate a command or set its defaults

lldp

Configure LLDP parameters

eee

Configure LLDP EEE parameters

rx_wake_time

Specify the EEE rx wake time

i0

EEE rx wake time

tx_wake_time

Specify the EEE tx wake time

i1

EEE tx wake time

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

receive

Enable LLDP reception on interface

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

tlv-select

Configure EEE parameter

eee

Enable/Disable LLDP EEE TLV

no

(Optional) Negate a command or set its defaults

lldp

Configure global LLDP parameters

tlv-select

Selection of LLDP to send

management-address

Management Address TLV

v4

Management Address TLV v4

v6

Management Address TLV v6

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

tlv-set

LLDP TLV configuration for interface

management-address

Management address to be sent in management-tlv of LLDPDU.

ip-addr

IP address in dotted decimal format i.i.i.i

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

tlv-set

LLDP TLV configuration for interface

management-address

Management address to be sent in management-tlv of LLDPDU.

ipv6

IPV6

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

tlv-set

LLDP TLV configuration for interface

vlan

VLAN-id whose SVI IP address should be used as management adrress in management-tlv of LLDPDU. Default is native VLAN.

vlan-id

(Optional) vlan-id within range of 1-4094

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

transmit

Enable LLDP transmission on interface

no

(Optional) Negate a command or set its defaults

load-balance

ITD Loadbalance

method

(Optional) ITD Loadbalance method

src

(Optional) Source based parameters

dst

(Optional) Destination based parameters

ip

(Optional) IP

ip-l4port

(Optional) IP and L4 port

src-protocol

(Optional) Protocol

range

(Optional) Match only packets in the range of port numbers

src-x

(Optional)

src-y

(Optional)

ip-dst

(Optional) IP

dst-protocol

(Optional) Protocol

dst-x

(Optional)

dst-y

(Optional)

buckets

(Optional) Used to create the buckets for traffic distribution, and it should be in powers of 2

num

(Optional) Loadbalance bucket number

mask-position

(Optional) Loadbalance mask position

mask

(Optional) Loadbalance mask position number range 0-31 for IPv4 and 0-127 for IPv6

no

(Optional) Negate a command or set its defaults

load-balance

ITD Loadbalance

method

(Optional) ITD Loadbalance method

src

(Optional) Source based parameters

dst

(Optional) Destination based parameters

ip

(Optional) IP

ip-l4port

(Optional) IP and L4 port

src-protocol

(Optional) Protocol

range

(Optional) Match only packets in the range of port numbers

src-x

(Optional)

src-y

(Optional)

ip-dst

(Optional) IP

dst-protocol

(Optional) Protocol

dst-x

(Optional)

dst-y

(Optional)

buckets

(Optional) Used to create the buckets for traffic distribution, and it should be in powers of 2

num

(Optional) Loadbalance bucket number

mask-position

(Optional) Loadbalance mask position

mask

(Optional) Loadbalance mask position number range 0-31 for IPv4 and 0-127 for IPv6

no

(Optional) Negate a command or set its defaults

load-balance

PLB Loadbalance

method

(Optional) PLB Loadbalance method

src

(Optional) Source based parameters

dst

(Optional) Destination based parameters

ip

(Optional) IP

ip-l4port

(Optional) IP and L4 port

src-protocol

(Optional) Protocol

range

(Optional) Match only packets in the range of port numbers

src-x

(Optional)

src-y

(Optional)

ip-dst

(Optional) IP

dst-protocol

(Optional) Protocol

dst-x

(Optional)

dst-y

(Optional)

buckets

(Optional) Used to create the buckets for traffic distribution, and it should be in powers of 2

num

(Optional) Loadbalance bucket number

mask-position

(Optional) Loadbalance mask position

mask

(Optional) Loadbalance mask position number range 0-31 for IPv4 and 0-127 for IPv6

no

(Optional) Negate a command or set its defaults

load-balance

Loadbalance

method

(Optional) Loadbalance method

src

(Optional) Source based parameters

dst

(Optional) Destination based parameters

ip

(Optional) IP

ip-l4port

(Optional) IP and L4 port

src-protocol

(Optional) Protocol

range

(Optional) Match only packets in the range of port numbers

src-x

(Optional)

src-y

(Optional)

ip-dst

(Optional) IP

dst-protocol

(Optional) Protocol

dst-x

(Optional)

dst-y

(Optional)

buckets

(Optional) Used to create the buckets for traffic distribution, and it should be in powers of 2

num

(Optional) Loadbalance bucket number

mask-position

(Optional) Loadbalance mask position

mask

(Optional) Loadbalance mask position number range 0-31 for IPv4 and 0-127 for IPv6

no

Negate a command or set its defaults

load-balancing

Load balancing method

load-bal

Load balancing method

no

Negate a command or set its defaults

load-interval

Specify interval for load calculation for an interface

interval

Load interval delay in seconds

interval1

(Optional) Load interval delay in seconds

no

Negate a command or set its defaults

load-interval

Specify interval for load calculation for an interface

interval

Load interval delay in seconds

interval1

(Optional) Load interval delay in seconds

no

Negate a command or set its defaults

load-interval

Specify interval for load calculation for an interface

counter

Specify counter for this load interval

counter_val

Specify counter for this load interval

interval

Load interval delay in seconds

interval1

(Optional) Load interval delay in seconds

no

Negate a command or set its defaults

load-interval

Specify interval for load calculation for an interface

counter

Specify counter for this load interval

interval

Load interval delay in seconds

counter_val

Specify counter for this load interval

interval1

(Optional) Load interval delay in seconds

load

Load system image

uri0

Enter image URI

s0

(Optional) Options

load

Load system image

uri0

Enter image URI

load

Load system image

uri0

Enter image URI

s0

(Optional) Options

no

Negate a command or set its defaults

local-as

Specify the local-as for this vrf

asn

AS number

no

Negate a command or set its defaults

default

Inherit values from a peer template

local-as

Specify the local-as number for the eBGP neighbor

asn

Autonomous System Number

no-prepend

(Optional) Do not prepend the local-as number to updates from the eBGP neighbor

replace-as

(Optional) Prepend only the local-as number to updates to eBGP neighbor

dual-as

(Optional) Connect using either the local-as number or the real as

no

(Optional) Negate a command or set its defaults

vrf

(Optional) VPN Routing/Forwarding instance name

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

local-label

Configure local label assignment and forwarding

static-inlabel

Label Value

prefix

For a given prefix

prefix

Destination prefix

mask

Destination prefix mask

prefix-mask

Destination prefix/mask

no

(Optional) Negate a command or set its defaults

vrf

(Optional) VPN Routing/Forwarding instance name

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

local-label

Configure local label assignment and forwarding

static-inlabel

Label Value

prefix

For a given prefix

no

(Optional) Negate a command or set its defaults

locator-led

blink locator led on device

chassis

blink chassis led

module

blink module led

module

please enter the module number

fan

blink Fan led

fan_num

fan number

no

(Optional) Negate a command or set its defaults

lockdown

Lockdown the LSP--disable reoptimization

no

(Optional) Negate a command or set its defaults

log-adjacency-changes

Log changes in adjacency state

no

(Optional) Negate a command or set its defaults

log-adjacency-changes

Log changes in adjacency state

detail

(Optional) Notify all state changes

no

(Optional) Negate a command or set its defaults

log-adjacency-changes

Log changes in adjacency state

no

(Optional) Negate a command or set its defaults

log-adjacency-changes

Log changes in adjacency state

detail

(Optional) Notify all state changes

no

(Optional) Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

log-adjacency-changes

Log changes in adjacency state

log-neighbor-changes

Enable/Disable IP-EIGRP neighbor logging

no

(Optional) Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

log-event-type

Set event types logged

dual

(Optional) Log DUAL events

xmit

(Optional) Log transmission events

transport

(Optional) Log transport events

no

(Optional) Negate a command or set its defaults

log-neighbor-changes

Log a message for neighbor up/down event

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

log-neighbor-changes

Log message for neighbor up/down event

disable

(Optional) Disable logging of neighbor up/down event

no

Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

log-neighbor-warnings

Enable/Disable IP-EIGRP neighbor warnings

interval

(Optional) Neighbor warning interval in seconds

no

(Optional) Negate a command or set its defaults

logging

Enable LDP logging

neighbor-changes

Log LDP neighbor state changes

no

Negate a command or set its defaults

logging

Trap logging configuration

lsp

LSP-specific traps logging configuration

path-errors

Log LSP Path Error traps

preemption

Log LSP Preemption traps

reservation-errors

Log LSP Reservation Error traps

setups

Log LSP Establishment Traps

teardowns

Log LSP Teardown Traps

tunnel

Tunnel-specific traps logging configuration

lsp-selection

Log Tunnel LSP Selection traps

path

Log Tunnel Path-related traps

change

Log Tunnel Path change traps

logging

Modify message logging facilities

abort

Flushes cached data without committing and releases the lock

logging

Exec logging commands

clear_console

Clear Console

logging

Modify message logging facilities

commit

Commits cached data (of all msg types) and releases the lock

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

console

Set console logging

i0

(Optional) 0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

logging

Exec logging commands

debug

Debug logging

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

distribute

Enables/disables fabric distribution using cfs.

logging

set logging for copp class

drop

logging for copp drops

threshold-packets

threshold value for dropped packets

threshold-bytes

threshold value for dropped bytes

level

(Optional) syslog level

level-value

(Optional) specify the logging level between 1-7

no

Negate a command or set its defaults

logging

set logging for copp class

drop

logging for copp drops

threshold-packets

threshold value for dropped packets

threshold-bytes

threshold value for dropped bytes

level

(Optional) syslog level

level-value

(Optional) specify the logging level between 1-7

no

(Optional) Negate a command or set its defaults

logging

Configure logging for interface

event

Interface events

link-status

UPDOWN and CHANGE messages

trunk-status

TRUNK status messages

enable

To enable logging overriding port level configuration

default

default logging configuration used by interfaces not explicitly configured

logging

Configure logging for interface

event

Interface events

port

Port level events

link-status

UPDOWN and CHANGE messages

no

Negate a command or set its defaults

logging

Configure logging for interface

event

Interface events

port

Port level events

link-status

UPDOWN and CHANGE messages

no

Negate a command or set its defaults

logging

Configure logging for interface

event

Interface events

port

Port level events

link-status

UPDOWN and CHANGE messages

default

(Optional) Use the global default value

logging

Configure logging for interface

event

Interface events

port

Port level events

link-status

UPDOWN and CHANGE messages

default

Use the global default value

logging

Configure logging for interface

event

Interface events

port

Port level events

trunk-status

TRUNK status messages

no

Negate a command or set its defaults

logging

Configure logging for interface

event

Interface events

port

Port level events

trunk-status

TRUNK status messages

logging

Configure logging for interface

event

Interface events

port

Port level events

trunk-status

TRUNK status messages

default

Use the global default value

no

(Optional) Negate a command or set its defaults

logging

Enable logging

flow-mod

Enable logging for flow-modify

no

(Optional) Negate a command or set its defaults

logging

Enable logging

flow-mod

Enable logging for flow-modify

logging

Exec logging commands

flush

Flushing logging

no

(Optional) Negate a command or set its defaults

logging

One Platform logging

invalid-username

Display invalid usernames in ONE-P log messages

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ipv6

Configure IPv6 features

icmp

ICMPv6 Commands

icmpv6

ICMPv6 Commands

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

auth

Set level for Authorization System

i1

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

authpriv

Set level for Authorization (Private) system

i2

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

cron

Set level for Cron/at facility

i3

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

daemon

Set level for System daemons

i4

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

ftp

Set level for File Transfer System

i5

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

kernel

Set level for kernel

i6

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local0

Set level for Local use daemons

i7

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

l