Cisco Nexus 9000 Series NX-OS Command Reference (Configuration Commands), Release 9.3(x)

packet-size

{ packet-size <packetsize> }

Syntax Description


packet-size	Packet
packetsize	Size

Command Mode

/exec/configure/configngoamconnectcheck

param-list param-list

[no] param-list <plistname> [ cross-check ] | param-list <plistname>

Syntax Description


no	(Optional) Negate a command or set its defaults
param-list	Configure a parameter list
plistname	Enter the name of the parameter list
cross-check	(Optional) Explicitly search for referencing config profile

Command Mode

/exec/configure

parity

[no] parity { even | none | odd }

Syntax Description


no	(Optional) Negate a command or set its defaults
parity	Set terminal parity
even	Even parity
none	No parity
odd	Odd parity

Command Mode

/exec/configure/com1

parity

[no] parity <parity-value>

Syntax Description


no	(Optional) Negate a command or set its defaults
parity	Set terminal parity
parity-value	terminal parity value

Command Mode

/exec/configure/console

passive-interface default

[no] passive-interface default

Syntax Description


no	(Optional) Negate a command or set its defaults
passive-interface	Suppress routing updates on the interface
default	interfaces passive by default

Command Mode

/exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

passive-interface default

[no] passive-interface default <level>

Syntax Description


no	(Optional) Negate a command or set its defaults
passive-interface	Suppress IS-IS PDU
default	Undo a command
level	IS-IS level

Command Mode

/exec/configure/router-isis/router-isis-vrf-common

passive-interface default

[no] passive-interface default

Syntax Description


no	(Optional) Negate a command or set its defaults
passive-interface	Suppress routing updates on the interface
default	interfaces passive by default

Command Mode

/exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

passive-interface default

[no] passive-interface default

Syntax Description


no	(Optional) Negate a command or set its defaults
passive-interface	Suppress routing updates on the interface
default	interfaces passive by default

Command Mode

/exec/configure/router-ospf /exec/configure/router-ospf/vrf

password

{ [ no ] password <passwd> }

Syntax Description


password	password
passwd	password

Command Mode

/exec/configure/dot1x-cred

password

password [ vrf { <vrf-name> | <vrf-known-name> } ] { required [ req-for <req-pfx-list> ] | { fallback | option <seq-num> opt-for <opt-pfx-list> } { key-chain <name> } } | no password [ vrf { <vrf-name> | <vrf-known-name> } ] { required | fallback | option <seq-num> }

Syntax Description


no	Negate a command or set its defaults
password	Configure LDP password
vrf	(Optional) VRF Routing/Forwarding instance information
vrf-name	(Optional) VPN Routing/Forwarding instance name
vrf-known-name	(Optional) Known VRF name
required	Password is required for the peer
req-for	(Optional) Prefix list specifying control on LDP peers
req-pfx-list	(Optional) Prefix list for LDP peers
fallback	Specifies a fallback password will follow
option	LDP password option
seq-num	Sequence number of the LDP password option
opt-for	Prefix list specifying control on LDP peers
opt-pfx-list	Prefix list for LDP peers
key-chain	Specifies a key-chain name will follow
name	Key-chain name

Command Mode

/exec/configure/ldp

password

password <password-string> | { no | default } password [ <password-string> ]

Syntax Description


no	Negate a command or set its defaults
default	Inherit values from a peer template
password	Configure a password for neighbor
password-string	Neighbor password

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-neighbor-stmp /exec/configure/router-bgp/router-bgp-vrf-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor /exec/configure/router-bgp/router-bgp-vrf-prefixneighbor

password prompt username

[no] password prompt username

Syntax Description


no	(Optional) Negate a command or set its defaults
password	Password for the user
prompt	Enable prompt for password
username	Enable prompt for password on username command

Command Mode

/exec/configure

password secure-mode

[no] password secure-mode

Syntax Description


no	(Optional) Negate a command or set its defaults
password	Password for the user
secure-mode	Enable secure mode for changing password

Command Mode

/exec/configure

password strength-check

[no] password strength-check

Syntax Description


no	(Optional) Negate a command or set its defaults
password	Password for the user
strength-check	Strength check of password

Command Mode

/exec/configure

path-option dynamic explicit identifier

[no] path-option [ protect ] <pref> | path-option <pref> dynamic [ attributes <attr-name> | { bandwidth <kbps> | lockdown } + ] | path-option [ protect ] <pref> explicit { identifier <id-num> | name <name> } [ { attributes <attr-name> [ verbatim ] | { bandwidth <kbps> | lockdown | verbatim } + } ]

Syntax Description


no	Negate a command or set its defaults
path-option	a primary or fallback path setup option
protect	(Optional) a path protection setup option
pref	preference for this path option
dynamic	setup based on dynamically calculated path
explicit	setup based on preconfigured path
identifier	Specify an IP explicit path by number
id-num	Number of ip explicit path
name	Specify an IP explicit path by name
name	Name of ip explicit path
attributes	(Optional) Specify an LSP attribute list
attr-name	(Optional) Name of LSP attribute list
verbatim	(Optional) send out path as is, with no checking
bandwidth	(Optional) override the bandwidth configured on the tunnel
kbps	(Optional) bandwidth requirement in kbps
lockdown	(Optional) not a candidate for reoptimization
kbps	(Optional) bandwidth requirement in kbps
lockdown	(Optional) not a candidate for reoptimization

Command Mode

/exec/configure/if-te /exec/configure/tunnel-te/cbts-member

path-selection metric igp

path-selection metric { igp | te } | no path-selection metric

Syntax Description


no	Negate a command or set its defaults
path-selection	Path Selection Configuration
metric	Metric Type Configuration
igp	Use IGP metric
te	Use TE metric (*Default)

Command Mode

/exec/configure/te

path-selection metric igp

[no] path-selection metric | path-selection metric { igp | te }

Syntax Description


no	Negate a command or set its defaults
path-selection	Path Selection Configuration
metric	Metric type for path calculation
igp	Use IGP Metric
te	Use TE Metric

Command Mode

/exec/configure/if-te /exec/configure/tunnel-te/cbts-member

path-selection overload allow

[no] path-selection overload allow | path-selection overload allow { head [ middle ] [ tail ] | middle [ tail ] | tail }

Syntax Description


no	Negate a command or set its defaults
path-selection	Path Selection Configuration
overload	Overload Node Configuration
allow	Allow overloaded nodes in CSPFs
head	Allow overloaded head node in TE CSPF
middle	(Optional) Allow overloaded middle node in TE CSPF
tail	(Optional) Allow overloaded tail node in TE CSPF

Command Mode

/exec/configure/te

path

path { <dn> | environment |

Syntax Description


\|	vxlan
\|	vxlan
path	Create a sensor path
dn	Distinguished Name
environment	Monitor chassis information including fan,temperature,power,storage,supervisor,linecard

Command Mode

/exec/configure/telemetry/sensor-group

path next-hop out-label-stack

{ no path <path-num> | path <path-num> next-hop <next-hop> out-label-stack { <static-outlabel> + | implicit-null } }

Syntax Description


no	Negate a command or set its defaults
path	Configure an outgoing path for the LSP
path-num	Path identifier
next-hop	Nexthop
next-hop	Destination IPv4 next hop
out-label-stack	Series of output labels
static-outlabel	Label Value
implicit-null	IETF MPLS implicit null label (3)

Command Mode

/exec/configure/mpls_static/ipv4/lsp/inlabel/forw

pathtrace nve

pathtrace nve { { { { ip { <numeric10> | <numeric11> | unknown } } [ vrf { <vrf-name> | <vrf-known-name> } | { <dot1qid1> } ] } | mac <dmac> <dot1qid> [ <intfid> ] } [ profile <pid> ] [ payload { [ mac-addr <dstmac> <smac> ] [ dot1q <dot1q-id> ] [ ip <dstip> <srcip> | ipv6 <dstipv6> <srcipv6> ] [ port <sport> <dport> ] [ proto <proto-id> ] [ src-intf <src_if> ] } payload-end ] [ copy-to <copy-to-ip> [ ext-id <ext_id> ] ] [

Syntax Description


pathtrace	Test
nve	network virtualization edge
numeric10	Peer vtep ip address
unknown	Peer vtep ip is unknown, will be derived from payload
intfid	(Optional) Name of the interface for ngoam pathtrace on which dot1q is configured
payload	(Optional) Enter customer payload
mac-addr	(Optional) Mac
dstmac	(Optional) Destination mac address
smac	(Optional) Source mac address
dot1q	(Optional) Encapsulation dot1q/bd
dot1q-id	(Optional) Encapsulation dot1q/bd on which the mac is learnt
ip	ip address
dstip	(Optional) Destination ipv4 address
srcip	(Optional) source ipv4 address
ipv6	(Optional) ipv6 address
port	(Optional) L4 port info
sport	(Optional) Source port
dport	(Optional) Destination port
proto	(Optional) Protocol
proto-id	(Optional) IANA Protocol id
src-intf	(Optional) Interface on which the host with src ip of the payload is connected
src_if	(Optional) Interface
payload-end	(Optional) End payload info input
profile	(Optional) NGOAM profile to use
pid	(Optional) NGOAM profile id
mac	Mac
dmac	Destination mac address
dot1qid	Encapsulation dot1q/bd on which the mac is learnt
dot1qid1	(Optional) Encapsulation dot1q/bd on which the mac is learnt
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
copy-to	(Optional) Send responses to this IP over mgmt vrf instead
copy-to-ip	(Optional) IpV4 addr to send responses to
ext-id	(Optional) Identifier passed from caller
ext_id	(Optional) 32-bit identifier

Command Mode

/exec

pause

[no] pause { no-drop | receive1 | { delayed-drop <timeout> } | { [ buffer-size <size-in-bytes> pause-threshold <xoff-bytes> resume-threshold <xon-bytes> ] pfc-cos <pfc-cos-list> [ receive ] } }

Syntax Description


no	(Optional) Negate a command or set its defaults
pause	PAUSE charecteristics (CBFC)
no-drop	NO-DROP
delayed-drop	Enable delayed-drop for the CoS
timeout	Timer value for delayed drop
buffer-size	(Optional) Ingress buffer size in bytes
pause-threshold	(Optional) Buffer limit for pausing in bytes
resume-threshold	(Optional) Buffer limit at which to resume in bytes
pfc-cos	CoS values to assert PFC on
receive	(Optional) Enable only PFC receive for the list of pfc-cos values
receive1	Enable only PFC receive
pfc-cos-list	List of class-of-service values

Command Mode

/exec/configure/policy-map/type/uf/class

pause

[no] pause { buffer-size <size-in-bytes> pause-threshold <xoff-bytes> resume-threshold <xon-bytes> }

Syntax Description


no	(Optional) Negate a command or set its defaults
pause	PAUSE characteristics (CBFC)
buffer-size	Ingress buffer size in bytes
pause-threshold	Buffer limit for pausing in bytes
resume-threshold	Buffer limit at which to resume in bytes

Command Mode

/exec/configure/policy-map/type/queuing/class

pause buffer-size2 pause-threshold2 resume-threshold2

[no] pause buffer-size2 <size-in-bytes> pause-threshold2 <xoff-bytes> resume-threshold2 <xon-bytes>

Syntax Description


no	(Optional) Negate a command or set its defaults
pause	PAUSE characteristics (CBFC)
buffer-size2	Ingress buffer size in bytes
pause-threshold2	Buffer limit for pausing in bytes
resume-threshold2	Buffer limit at which to resume in bytes

Command Mode

/exec/configure/policy-map/type/queuing/class

pause priority

[no] pause { priority-group <priority-group-number> }

Syntax Description


no	(Optional) Negate a command or set its defaults
pause	PAUSE characteristics (CBFC)
priority-group	ingress priority-group to which the traffic is mapped and pause limits are applied
priority-group-number	Priority group value

Command Mode

/exec/configure/policy-map/type/queuing/class

payload

[no] payload

Syntax Description


no	(Optional) Negate a command or set its defaults
payload	Configure ngoam connectivity check payload

Command Mode

/exec/configure/configngoamconnectcheck

payload test pattern-type pad

{ payload { test pattern-type <test-id> | pad <pad-val> } } | { no payload { test pattern-type | pad } }

Syntax Description


no	Negate a command or set its defaults
payload	Configure ngoam payload
test	Configure ngoam payload test
pattern-type	Configure ngoam payload test pattern
test-id	Configure ngoam payload test pattern id
pad	Configure ngoam payload test pattern pad
pad-val	Configure ngoam payload test pad value

Command Mode

/exec/configure/configngoamprofile

pcc

[no] pcc

Syntax Description


no	(Optional) Negate a command or set its defaults
pcc	PCC related configuration

Command Mode

/exec/configure/sr/te

pce-address ipv4

[no] pce-address ipv4 <ip-address> [ precedence <precedence> ]

Syntax Description


no	(Optional) Negate a command or set its defaults
pce-address	Configure the address of the PCE
ipv4	Configure v4 address of the PCE
precedence	(Optional) Precedence of the PCE
ip-address	PCE address
precedence	(Optional) Path-option preference

Command Mode

/exec/configure/sr/te/pcc

pcep

[no] pcep

Syntax Description


no	(Optional) Negate a command or set its defaults
pcep	Dynamic path needs to be computed externally via PCEP

Command Mode

/exec/configure/sr/te/pol/cndpaths/pref/dyn

pcep

[no] pcep

Syntax Description


no	(Optional) Negate a command or set its defaults
pcep	Dynamic path needs to be computed externally via PCEP

Command Mode

/exec/configure/sr/te/color/cndpaths/pref/dyn

peer-gateway

peer-gateway [ exclude-vlan <vlan-list> ] | no peer-gateway

Syntax Description


no	Negate a command or set its defaults
peer-gateway	Enable L3 forwarding for packets destined to peer's gateway mac-address
exclude-vlan	(Optional) Specify VLANs to be excluded from peer-gateway functionality
vlan-list	(Optional) Specify the list of vlans

Command Mode

/exec/configure/vpc-domain

peer-ip

[no] peer-ip { <addr> }

Syntax Description


no	(Optional) Negate a command or set its defaults
peer-ip	Static IP Address Configuration
addr	Remote Peer IP Address

Command Mode

/exec/configure/if-nve/vni/ingr-rep

peer-keepalive destination

peer-keepalive destination [ <dst-ip> | <dst-ipv6> ] [ [ source [ <src-ip> | <src-ipv6> ] | udp-port <udp-port-num> | vrf { <vrf-name> | <vrf-known-name> } | { interval <interval-ms> timeout <time-out> } | tos-byte <tos-byte-value> | hold-timeout <hold-time-out> ] + | [ source [ <src-ip> | <src-ipv6> ] | udp-port <udp-port-num> | vrf { <vrf-name> | <vrf-known-name> } | { interval <interval-ms> timeout <time-out> } | tos { <tos-value> | min-delay | max-throughput | max-reliability | min-monetary-cost | normal } | hold-timeout <hold-time-out> ] + | [ source [ <src-ip> | <src-ipv6> ] | udp-port <udp-port-num> | vrf { <vrf-name> | <vrf-known-name> } | { interval <interval-ms> timeout <time-out> } | precedence { <prec-vlaue> | network | internet | critical | flash-override | flash | immediate | priority | routine } | hold-timeout <hold-time-out> ] + ]

Syntax Description


peer-keepalive	Keepalive/Hello with peer switch
destination	specify destination ip address of peer switch
dst-ip	(Optional) IPv4 address (A.B.C.D) of destination
source	(Optional) source interface for hello
src-ip	(Optional) IPv4 address (A.B.C.D) of source
udp-port	(Optional) enter UDP port number used for hello
udp-port-num	(Optional) udp port number for hellos
vrf	(Optional) vrf to be used for hello messages
vrf-name	(Optional) vrf to be used for hellos
vrf-known-name	(Optional) Known VRF name
interval	(Optional) enter interval in milleseconds
interval-ms	(Optional) Enter interval in milleseconds
timeout	(Optional) enter timeout in seconds
time-out	(Optional) enter timeout in seconds
precedence	(Optional) Precedence
prec-vlaue	(Optional) Precedence value
network	(Optional) network (7)
internet	(Optional) internet (6)
critical	(Optional) critical (5)
flash-override	(Optional) flash-override (4)
flash	(Optional) flash (3)
immediate	(Optional) immediate (2)
priority	(Optional) priority (1)
routine	(Optional) routine (0)
tos	(Optional) Type of Service(IPV4)/Traffic Class(IPV6)
tos-value	(Optional) Enter 4-bit TOS value
min-delay	(Optional) min-delay (8)
max-throughput	(Optional) max-throughput (4)
max-reliability	(Optional) max-reliability (2)
min-monetary-cost	(Optional) min-monetary-cost (1)
normal	(Optional) normal (0)
tos-byte	(Optional) Type of Service Byte (IPv4)/Traffic Class Octet(IPv6)
tos-byte-value	(Optional) Enter 8-bit TOS value
hold-timeout	(Optional) hold timeout to ignore stale peer alive messages
hold-time-out	(Optional) Enter hold-timeout in seconds

Command Mode

/exec/configure/vpc-domain

peer-switch

[no] peer-switch

Syntax Description


no	(Optional) Negate a command or set its defaults
peer-switch	Enable peer switch on vPC pair switches

Command Mode

/exec/configure/vpc-domain

peer-type fabric

peer-type { fabric-external | fabric-border-leaf } | { no | default } peer-type

Syntax Description


no	Negate a command or set its defaults
default	Inherit values from a peer template
peer-type	Neighbor facing
fabric-external	Fabric external
fabric-border-leaf	Fabric Border Leaf

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor-sess

peer-vtep

[no] peer-vtep <addr>

Syntax Description


no	(Optional) Negate a command or set its defaults
peer-vtep	Configure tunnel End Point (deprecate)
addr	Remote VTEP IP Address

Command Mode

/exec/configure/if-nve/vni

peer local service

[no] peer local service <service-name>

Syntax Description


no	(Optional) Negate a command or set its defaults
peer	Peer cli for sandwich mode failure notification
local	Peer involved in sandwich mode
service	Peer service involved in sandwich mode
service-name	Peer service name string

Command Mode

/exec/configure/itd

peer local service

[no] peer local service <service-name>

Syntax Description


no	(Optional) Negate a command or set its defaults
peer	Peer cli for sandwich mode failure notification
local	Peer involved in sandwich mode
service	Peer service involved in sandwich mode
service-name	Peer service name

Command Mode

/exec/configure/plb

peer vpc

[no] peer <svc-name> vpc <num>

Syntax Description


no	(Optional) Negate a command or set its defaults
peer	smart channel peer
vpc	vpc
svc-name	peer smart channel name
num	VPC number to assign to smart-channel

Command Mode

/exec/configure/smartc

per-ingress-port-mtu-mode

[no] per-ingress-port-mtu-mode

Syntax Description


no	(Optional) Negate the command
per-ingress-port-mtu-mode	per-ingress-port mtu mode

Command Mode

/exec/configure handle auto 424

perf

perf [ { record { context-switch | profile } { system | process <i0> } [ <s1> ] } | { stop { all | <s0> } } | { list } | { create-archive <s2> } | { remove { all | <s3> } } ]

Syntax Description


perf	Run perf tool to collect or process event data
record	(Optional) Record events to a file for later analysis
stop	(Optional) Stop a perf record.
list	(Optional) List recorded datasets
create-archive	(Optional) Create an archive of dataset for download
remove	(Optional) Remove recorded dataset(s)
all	(Optional) Act on all recorded datasets
context-switch	(Optional) Record context-switch events
profile	(Optional) Record periodic runtime samples
system	(Optional) Record events for all processes on all CPUS
process	(Optional) Record events for a specific process with the given pid
i0	(Optional) pid of process to record events
s0	(Optional) id of perf record session to stop
s1	(Optional) id to use for perf record session
s2	(Optional) id of perf dataset to create an archive
s3	(Optional) id of perf dataset to remove

Command Mode

/exec

periodic-inventory notification

[no] periodic-inventory notification

Syntax Description


no	(Optional) Negate a command or set its defaults
periodic-inventory	Configure periodic software inventory message dispatch
notification	Enable periodic software inventory message dispatch

Command Mode

/exec/configure/callhome

periodic-inventory notification interval

periodic-inventory notification { interval <i0> | timeofday <s0> }

Syntax Description


periodic-inventory	Configure periodic software inventory message dispatch
notification	Enable periodic software inventory message dispatch
interval	Configure the time period for periodic inventory
i0	Time period in days (default is 7 days)
timeofday	Configure the timeofday for periodic inventory in HH:MM format
s0	Time period in HH:MM format

Command Mode

/exec/configure/callhome

periodic to

{ [ <seqno> ] | no } periodic { Monday | Tuesday | Wednesday | Thursday | Friday | Saturday | Sunday } <stime> to { <eday> } <etime>

Syntax Description


seqno	(Optional) Sequence number
no	Negate a command or set its defaults
periodic	Periodic time and date
Monday	Monday
Tuesday	Tuesday
Wednesday	Wednesday
Thursday	Thursday
Friday	Friday
Saturday	Saturday
Sunday	Sunday
eday	Day of the week
stime	Starting time
to	Ending day and time
etime	Ending time

Command Mode

/exec/configure/timerange

periodic to

{ [ <seqno> ] | no } periodic { { Monday | Tuesday | Wednesday | Thursday | Friday | Saturday | Sunday } + | daily | weekdays | weekend } <stime> to <etime>

Syntax Description


seqno	(Optional) Sequence number
no	Negate a command or set its defaults
periodic	Periodic time and date
Monday	Monday
Tuesday	Tuesday
Wednesday	Wednesday
Thursday	Thursday
Friday	Friday
Saturday	Saturday
Sunday	Sunday
daily	Every day of the week
weekdays	Monday thru Friday
weekend	Saturday and Sunday
stime	Starting time
to	Ending day and time
etime	Ending time

Command Mode

/exec/configure/timerange

permit interface

[no] permit interface <if0>

Syntax Description


no	(Optional) Negate a command or set its defaults
permit	Permit access to interfaces (applicable if interface policy is 'deny')
interface	Enter the range of interfaces accessible the role
if0	Enter the interface range

Command Mode

/exec/configure/role/interface

permit vlan

[no] permit vlan <vlan-mrange>

Syntax Description


no	(Optional) Negate a command or set its defaults
permit	Permit access to vlans (applicable if vlan policy is 'deny')
vlan	Enter the range of vlans accessible the role
vlan-mrange	Enter the vlan range

Command Mode

/exec/configure/role/vlan

permit vrf

[no] permit vrf <vrf-name>

Syntax Description


no	(Optional) Negate a command or set its defaults
permit	Permit access to vrf (applicable if vrf policy is 'deny')
vrf	Enter the range of vrf accessible the role
vrf-name	Enter the vrf name

Command Mode

/exec/configure/role/vrf

permit vsan

[no] permit vsan <vsan-mrange>

Syntax Description


no	(Optional) Negate a command or set its defaults
permit	Permit access to vsans (applicable if vsan policy is 'deny')
vsan	Enter the range of vsans accessible the role
vsan-mrange	Enter the vsan range

Command Mode

/exec/configure/role/vsan

personality

[no] personality

Syntax Description


no	(Optional) Negate a mode
personality	Config Personality

Command Mode

/exec/configure

personality backup

personality backup { <uri_local> | <uri_remote> [ password <password> ] [ vrf <vrf-known-name> ] }

Syntax Description


personality	personality
backup	backup personality
password	(Optional) The password for personality backups
vrf	(Optional) The VRF for personality backups
uri_local	Personality backup local destination
uri_remote	Personality backup remote destination
password	(Optional) Password for SCP username
vrf-known-name	(Optional) VRF name

Command Mode

/exec

personality restore

personality restore <uri> [ user-name <user> ] [ password <password> ] [ hostname <hostname> ] [ vrf <vrf_name> ]

Syntax Description


personality	Personality
restore	Restore the personality file
uri	Personality file
user-name	(Optional) The username for downloads
user	(Optional) The username
password	(Optional) The password for downloads
password	(Optional) The password
hostname	(Optional) The hostname for downloads
hostname	(Optional) The hostname
vrf	(Optional) The VRF for downloads
vrf_name	(Optional) The VRF name

Command Mode

/exec

phone-contact

{ phone-contact <s0> | no phone-contact }

Syntax Description


no	Negate a command or set its defaults
phone-contact	Contact person's phone number
s0	Phone number in international format(such as +1-800-123-4567)

Command Mode

/exec/configure/callhome

pim

[no] pim

Syntax Description


no	(Optional) Negate a command or set its defaults
pim	Policies for a Remote Receiver

Command Mode

/exec/configure/nbm-host-policy

pim

[no] pim

Syntax Description


no	(Optional) Negate a command or set its defaults
pim	Policies for a Remote Receiver

Command Mode

/exec/configure/nbm-vrf/nbm-host-policy

ping

ping [ { { <alpha> | <numeric> [ loopback interface <interface> ] } | { multicast <group> interface <interface> [ loopback ] } } [ [ source-interface <src-intf> | vrf { <vrf-name> | <vrf-known-name> } ] [ count { <count> | unlimited } | packet-size <packetsize> | vrf { <vrf-name> | <vrf-known-name> } | interval <interval> | source { <alpha> | <numeric1> } | df-bit | timeout <timeout> ] + | [ count { <count> | unlimited } | packet-size <packetsize> | source-interface <src-intf> | interval <interval> | df-bit | timeout <timeout> ] + ] ]

Syntax Description


ping	Test
count	(Optional) Number
unlimited	(Optional) Unlimited
count	(Optional) Number
packet-size	(Optional) Packet
packetsize	(Optional) Size
source-interface	(Optional) Select source interface
src-intf	(Optional) Specify interface
interval	(Optional) Wait
interval	(Optional) Interval
numeric	(Optional) IP address of remote system
numeric1	(Optional) IP
alpha	(Optional) Enter
multicast	(Optional) Multicast
group	(Optional) Multicast
interface	(Optional) Interface
interface	(Optional) Interface
loopback	(Optional) Receive
source	(Optional) Source
df-bit	(Optional) Enable
timeout	(Optional) Specify
timeout	(Optional) Timeout
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name

Command Mode

/exec

ping6

ping6 { { <host> | <hostname> } | { multicast <group> } } [ [ { count { <count> | unlimited } } | { packet-size <packetsize> } | [ source { <host1> | <hostname> } ] | vrf { <vrf-name> | <vrf-known-name> } | timeout <timeout> | { interval <interval> } ] + | [ { count { <count> | unlimited } } | { packet-size <packetsize> } | { source-interface <src-intf> } | timeout <timeout> | { interval <interval> } ] + ]

Syntax Description


ping6	Test
count	(Optional) Number
count	(Optional) Number
unlimited	(Optional) unlimited
packet-size	(Optional) Packet
packetsize	(Optional) Size
source-interface	(Optional) Select source interface
src-intf	(Optional) Specify interface
interval	(Optional) Wait
interval	(Optional) Interval
hostname	Enter
multicast	Multicast
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
source	(Optional) Source
timeout	(Optional) Specify
timeout	(Optional) Timeout

Command Mode

/exec

ping mpls

ping mpls { nil-fec { { labels <comma-separated-labels> } { output { ointerface <tx-interface> } nexthop <nexthop-ip-addr> } | { policy { { name <srte-policy-name> } | { endpoint <srte-policy-endpoint> color <srte-policy-color> } } [ { output { ointerface <tx-interface> } [ nexthop <nexthop-ip-addr> ] } ] } } } [ { repeat <count> } | { { size <size> } | { sweep <min-size> <max-size> <increment> } } | { timeout <seconds> } | { interval <milliseconds> } | { destination <addr-start> [ <addr-end> [ <addr-incr-mask> | <addr-incr> ] ] } | { source <addr> } | { exp <exp-value> } | { pad <pattern> } | { ttl <ttl> } | { verbose } | { reply { { mode { <reply-mode-ipv4> | router-alert | control-channel | no-reply } } | { dscp { <dscp-bits> | af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | default | ef } } | { pad-tlv } } } + | { force-explicit-null } | { dsmap [ hashkey { none | { hash-ipv4 { bitmap <bitmap-size> } } } ] } | { flags { fec } } ] +

Syntax Description


ping	need
mpls	Test
nil-fec	Target
labels	A
comma-separated-labels	A
repeat	(Optional) Repeat
count	(Optional) Repeat
size	(Optional) Packet
size	(Optional) Datagram
sweep	(Optional) Sweep
min-size	(Optional)
max-size	(Optional)
increment	(Optional) Sweep
timeout	(Optional) Timeout
seconds	(Optional) Timeout
interval	(Optional) Send
milliseconds	(Optional) Send
destination	(Optional) Destination
addr-start	(Optional) Destination
addr-end	(Optional) Destination
addr-incr-mask	(Optional) Destination
addr-incr	(Optional) Destination
source	(Optional) Source
addr	(Optional) Source
exp	(Optional) EXP
exp-value	(Optional) EXP
pad	(Optional) Pad
pattern	(Optional) Pad
ttl	(Optional) Time
ttl	(Optional) TTL
verbose	(Optional) verbose
reply	(Optional) Reply
mode	(Optional) Reply
reply-mode-ipv4	(Optional) Send
router-alert	(Optional) Send
control-channel	(Optional) Send
no-reply	(Optional) Send
dscp	(Optional) DSCP
dscp-bits	(Optional) Differentiated
af11	(Optional) Match
af12	(Optional) Match
af13	(Optional) Match
af21	(Optional) Match
af22	(Optional) Match
af23	(Optional) Match
af31	(Optional) Match
af32	(Optional) Match
af33	(Optional) Match
af41	(Optional) Match
af42	(Optional) Match
af43	(Optional) Match
cs1	(Optional) Match
cs2	(Optional) Match
cs3	(Optional) Match
cs4	(Optional) Match
cs5	(Optional) Match
cs6	(Optional) Match
cs7	(Optional) Match
default	(Optional) Match
ef	(Optional) Match
pad-tlv	(Optional) Reply
force-explicit-null	(Optional) Force
output	Output
ointerface	Echo
tx-interface	Echo
nexthop	Next
nexthop-ip-addr	Next
dsmap	(Optional) Request
hashkey	(Optional) Downstream
none	(Optional) Hash
hash-ipv4	(Optional) IPv4
bitmap	(Optional) Hash
bitmap-size	(Optional) Multipath
flags	(Optional) Flag
fec	(Optional) Request
policy	Derive
name	Specify
color	Specify
endpoint	Specify
srte-policy-name	The
srte-policy-color	The
srte-policy-endpoint	The

Command Mode

/exec

ping nve

ping nve { { { { { ip { <numeric10> | <numeric11> | unknown } } [ vrf { <vrf-name> | <vrf-known-name> } | { <dot1qid1> } ] } | mac <dmac> <dot1qid> [ <intfid> ] } [ profile <pid> ] } [ payload { [ mac-addr <dstmac> <smac> ] [ dot1q <dot1q-id> ] [ ip <dstip> <srcip> | ipv6 <dstipv6> <srcipv6> ] [ port <sport> <dport> ] [ proto <proto-id> ] [ src-intf <src_if> ] } payload-end ] [ source { <numeric1> | <numeric2> } |

Syntax Description


{	<count>
ping	Test
nve	network virtualization edge
numeric10	Ipv4 address of remote host / VTEP
unknown	Peer vtep ip is unknown, Applicable only for channel Nv03
dot1qid	Encapsulation dot1q/bd on which the mac is learnt
intfid	(Optional) Name of the interface for ngoam ping on which dot1q is configured
payload	(Optional) Enter customer payload
port	(Optional) L4 port info
sport	(Optional) Source port
dport	(Optional) Destination port
proto	(Optional) Protocol
proto-id	(Optional) IANA Protocol id
src-intf	(Optional) Interface on which the host with src ip of the payload is connected
src_if	(Optional) Interface
payload-end	(Optional) End of payload info
profile	(Optional) NGOAM profile to use
pid	(Optional) NGOAM profile id
mac	Mac
mac-addr	(Optional) Mac
ip	ip address
dstip	(Optional) Destination ipv4 address
srcip	(Optional) source ipv4 address
ipv6	(Optional) ipv6 address
dmac	Destination mac address
dstmac	(Optional) Destination mac address
smac	(Optional) Source mac address
dot1q	(Optional) Encapsulation dot1q/bd
dot1q-id	(Optional) Encapsulation dot1q/bd on which the mac is learnt
dot1qid1	(Optional) Encapsulation dot1q/bd on which the mac is learnt
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
source	(Optional) Source
numeric1	(Optional) IP

Command Mode

/exec

ping sr-mpls

ping sr-mpls { <sr-ipv4-prefix> fec-type { { igp isis } | { bgp } | { generic } } } [ { repeat <count> } | { { size <size> } | { sweep <min-size> <max-size> <increment> } } | { timeout <seconds> } | { interval <milliseconds> } | { destination <addr-start> [ <addr-end> [ <addr-incr-mask> | <addr-incr> ] ] } | { source <addr> } | { exp <exp-value> } | { pad <pattern> } | { ttl <ttl> } | { verbose } | { reply { { mode { <reply-mode-ipv4> | router-alert | control-channel | no-reply } } | { dscp { <dscp-bits> | af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | default | ef } } | { pad-tlv } } } + | { force-explicit-null } | { dsmap [ hashkey { none | { hash-ipv4 { bitmap <bitmap-size> } } } ] } | { flags { fec } } ] +

Syntax Description


ping	need
sr-mpls	Test
sr-ipv4-prefix	IP
fec-type	Type
igp	Kind
isis	ISIS
bgp	BGP
generic	Generic
repeat	(Optional) Repeat
count	(Optional) Repeat
size	(Optional) Packet
size	(Optional) Datagram
sweep	(Optional) Sweep
min-size	(Optional)
max-size	(Optional)
increment	(Optional) Sweep
timeout	(Optional) Timeout
seconds	(Optional) Timeout
interval	(Optional) Send
milliseconds	(Optional) Send
destination	(Optional) Destination
addr-start	(Optional) Destination
addr-end	(Optional) Destination
addr-incr-mask	(Optional) Destination
addr-incr	(Optional) Destination
source	(Optional) Source
addr	(Optional) Source
exp	(Optional) EXP
exp-value	(Optional) EXP
pad	(Optional) Pad
pattern	(Optional) Pad
ttl	(Optional) Time
ttl	(Optional) TTL
verbose	(Optional) verbose
reply	(Optional) Reply
mode	(Optional) Reply
reply-mode-ipv4	(Optional) Send
router-alert	(Optional) Send
control-channel	(Optional) Send
no-reply	(Optional) Send
dscp	(Optional) DSCP
dscp-bits	(Optional) Differentiated
af11	(Optional) Match
af12	(Optional) Match
af13	(Optional) Match
af21	(Optional) Match
af22	(Optional) Match
af23	(Optional) Match
af31	(Optional) Match
af32	(Optional) Match
af33	(Optional) Match
af41	(Optional) Match
af42	(Optional) Match
af43	(Optional) Match
cs1	(Optional) Match
cs2	(Optional) Match
cs3	(Optional) Match
cs4	(Optional) Match
cs5	(Optional) Match
cs6	(Optional) Match
cs7	(Optional) Match
default	(Optional) Match
ef	(Optional) Match
pad-tlv	(Optional) Reply
force-explicit-null	(Optional) Force
dsmap	(Optional) Request
hashkey	(Optional) Downstream
none	(Optional) Hash
hash-ipv4	(Optional) IPv4
bitmap	(Optional) Hash
bitmap-size	(Optional) Multipath
flags	(Optional) Flag
fec	(Optional) Request

Command Mode

/exec

platform access-list capture

[no] { platform | hardware } access-list capture

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
access-list	Access Control List
capture	Configure ACL capture

Command Mode

/exec/configure

platform access-list fp_dnl

[no] { platform | hardware } access-list fp_dnl

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
access-list	Access control list
fp_dnl	Fabric path - do not learn mac from broadcast

Command Mode

/exec/configure

platform access-list update

[no] { platform | hardware } access-list update { { atomic [ strict ] } | { default-result permit } }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
access-list	Access Control List
update	Configure atomic/non-atomic update and default-result
atomic	Enable atomic update of access-list in hardware
strict	(Optional) Strict check on TCAM size for using mutliple features
default-result	Default access-list result during non-atomic hardware update
permit	Permit all packets during non-atomic update

Command Mode

/exec/configure

platform acl tap-agg

[no] { platform | hardware } acl tap-agg

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
acl	Configure acl related configuration
tap-agg	Enable tap-aggregation feature on this pltfm

Command Mode

/exec/configure

platform forwarding interface statistics mode mpls

[no] { platform | hardware } forwarding interface statistics mode { mpls | default } [ module <module-num> ]

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
forwarding	Hardware forwarding
interface	Interface
statistics	Statistics
mode	Statistics mode
mpls	Mpls mode
default	Default mode
module	(Optional) Specify a module number
module-num	(Optional) Specify a module number

Command Mode

/exec/configure

platform forwarding layer-2 f1 exclude supervisor

[no] { platform | hardware } forwarding layer-2 f1 exclude supervisor

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
forwarding	Forwarding information
layer-2	L2 only mode
f1	N7K-F132XP-15 module
exclude	Exclude supervisor from getting copies of ARP and multicast packets
supervisor	Supervisor module

Command Mode

/exec/configure

platform ip verify

[no] { platform | hardware } ip verify { address { source { broadcast | multicast } | class-e | destination { zero } | identical | reserved } | checksum | protocol | fragment | length { minimum | consistent | maximum { max-frag | udp | max-tcp } } | tcp { tiny-frag } | version | syslog }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
ip	IP
verify	Enable IPv4 and some IPv6 packet validation checks in hardware
address	IPv4 Source and destination address validation
source	Check source address
broadcast	Source address is 255.255.255.255
multicast	Source address is 224.x.x.x
destination	Check destination address
zero	Destination address is 0.0.0.0
class-e	Class E IDS check
identical	Same IP SA and DA
reserved	Source address is 127.x.x.x
checksum	Verify IPv4 and IPv6 packet checksum
protocol	Verify IP procotol
fragment	Check IPv4 and IPv6 fragment with non-zero offset and DF bit active
length	Validate IPv4 packet header and payload length
minimum	Minimum IPv4 header length
consistent	Actual frame size is equal to or more than IPv4 length plus ethernet header
maximum	Check max fragment offset and payload length
max-frag	Fragment offset field value
udp	Maximum UDP length has to be less than IPv4 payload length
max-tcp	Maximum TCP length has to be less than IPv4 payload length
tcp	Validate TCP packet header
tiny-frag	Check TCP tiny fragment
version	Must be 4 for an ethertype of IPv4 (0x0800)
syslog	Syslog Messages logging configuration for IDS check drops

Command Mode

/exec/configure

platform ipv6 verify

[no] { platform | hardware } ipv6 verify { length { consistent | maximum { max-frag | udp | max-tcp } } | tcp { tiny-frag } | version }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
ipv6	IPv6
verify	Enable IPv6 packet validation checks in hardware
length	Validate IPv6 packet header and payload length
consistent	Actual frame size is equal to or more than IPv6 length plus ethernet header
maximum	Check max fragment offset and payload length
max-frag	Fragment offset field value
udp	Maximum UDP length has to be less than IPv6 payload length
max-tcp	Maximum TCP length has to be less than IPv6 payload length
tcp	Validate TCP packet header
tiny-frag	Check TCP tiny fragment
version	Must be 6 for an ethertype of IPv6 (0x86DD)

Command Mode

/exec/configure

platform qos

[no] { platform | hardware } qos { ns-mcq3-alias qos-group <qos-grp-val> [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure QoS related configuration
ns-mcq3-alias	Select qos-group to which to divert qos-group-3 Multicast traffic
qos-group	Qos Group
qos-grp-val	QoS group value
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos

[no] { platform | hardware } qos { afd profile <prof-opts> [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
afd	Approximate Fair Dropping
profile	AFD profiles
prof-opts
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos

[no] { platform | hardware } qos { min-buffer qos-group <buff-prof-opts> [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
min-buffer	minimum/reserved buffer selection
qos-group	Qos Group
buff-prof-opts
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos

[no] { platform | hardware } qos { ing-pg-hdrm-reserve percent <percent-val> [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
ing-pg-hdrm-reserve	Set Ingress PG Headroom reservation
percent	PG Headroom reservation percent
percent-val	percent of PG Headroom to reserve
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos

[no] { platform | hardware } qos { burst-detect max-records <val> }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
burst-detect	Set OOBST burst monitor configs
max-records	Set OOBST burst monitor max records
val	maximum number of records to monitor

Command Mode

/exec/configure

platform qos

[no] { platform | hardware } qos { burst-detect rise-threshold <val> bytes fall-threshold <val> bytes }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
burst-detect	Set OOBST burst monitor configs
rise-threshold	Threshold bytes(queue depth) to start monitoring burst
val	Value in bytes
bytes	Bytes
fall-threshold	Threshold bytes(queue depth) to stop monitoring burst
val	Value in bytes
bytes	Bytes

Command Mode

/exec/configure

platform qos

[no] { platform | hardware } qos { oq-drops type <sel> [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
oq-drops	per output queue drops
type	type of drops - occ/wred/both
sel
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos

[no] { platform | hardware } qos { oq-stats [ { q0 | q1 | q2 | q3 | q4 | q5 | q6 | q7 | q8 | q9 } ] [ { counter0 | counter1 | counter2 | counter3 | counter4 | counter5 | counter6 | counter7 | counter8 | counter9 } ] type { all | <sel1> [ <sel2> ] } [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
oq-stats	per output queue statistics
q0	(Optional) queueing statistics for qos-group q0 (default)
q1	(Optional) queueing statistics for qos-group q1
q2	(Optional) queueing statistics for qos-group q2
q3	(Optional) queueing statistics for qos-group q3
q4	(Optional) queueing statistics for qos-group q4
q5	(Optional) queueing statistics for qos-group q5
q6	(Optional) queueing statistics for qos-group q6
q7	(Optional) queueing statistics for qos-group q7
q8	(Optional) queueing statistics for qos-group q8 (cpu)
q9	(Optional) queueing statistics for qos-group q9 (span)
counter0	(Optional) use per-port counter 0
counter1	(Optional) use per-port counter 1
counter2	(Optional) use per-port counter 2
counter3	(Optional) use per-port counter 3
counter4	(Optional) use per-port counter 4
counter5	(Optional) use per-port counter 5
counter6	(Optional) use per-port counter 6
counter7	(Optional) use per-port counter 7
counter8	(Optional) use per-port counter 8
counter9	(Optional) use per-port counter 9
type	type of statistics
all	aggregated occ-drops + wred-drops + ecn-stats
sel1
sel2	(Optional)
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos

[no] { platform | hardware } qos { dynamic-packet-prioritization age-period <period> usec [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
dynamic-packet-prioritization	Dynamic Packet Prioritization
age-period	Aging Period
period	Aging Period
usec	micro seconds
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos

[no] { platform | hardware } qos { dynamic-packet-prioritization max-num-pkts <pkts> [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
dynamic-packet-prioritization	Dynamic Packet Prioritization
max-num-pkts	Maximum number of packets prioritized
pkts	Number of packets
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos

[no] { platform | hardware } qos { etrap age-period <period> usec [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
etrap	Elephant Trap
age-period	Aging Period
period	Aging Period
usec	micro seconds
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos

[no] { platform | hardware } qos { etrap byte-count <count> [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
etrap	Elephant Trap
byte-count	Number of bytes to become elephant flow
count	Number of bytes
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos

[no] { platform | hardware } qos { etrap bandwidth-threshold <bw> bytes [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
etrap	Elephant Trap
bandwidth-threshold	Bandwidth threshold for elephant flow
bw	Number of bytes
bytes	Bytes
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos

[no] { platform | hardware } qos { buffer input peak <sel> [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
buffer	buffer config for EX platforms
input	input buffer
peak	peak counter type
sel
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos

[no] { platform | hardware } qos { [ cpu-pg-size <cpu-size> ] [ lcpu-pg-size <lcpu-size> ] [ span-pg-size <span-size> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
cpu-pg-size	(Optional) Configure CPU Pool Group thresholds
cpu-size	(Optional) Pool Group size
lcpu-pg-size	(Optional) Configure LCPU Pool Group thresholds
lcpu-size	(Optional) Pool Group size
span-pg-size	(Optional) Configure SPAN Pool Group thresholds
span-size	(Optional) Pool Group size

Command Mode

/exec/configure

platform qos buffer peak monitor counter0 class

[no] { platform | hardware } qos buffer peak monitor counter0 class <classes>

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
buffer	buffer config
peak	Configure peak control
monitor	monitor peak
counter0	selecting counter 0 for assigning classes
class	class(es) to monitor
classes	qos-group

Command Mode

/exec/configure

platform qos buffer peak monitor counter1 class

[no] { platform | hardware } qos buffer peak monitor counter1 class { <classes> | none }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
buffer	buffer config
peak	Configure peak control
monitor	monitor peak
counter1	selecting counter 1 for assigning classes
class	class(es) to monitor
classes	qos-group
none	none

Command Mode

/exec/configure

platform qos classify ns-only

[no] { platform | hardware } qos classify ns-only

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Quality Of Service
classify	Configure qos classification
ns-only	Enable qos classification on NS only in hardware

Command Mode

/exec/configure

platform qos eoq

[no] { platform | hardware } qos eoq { stats-class qos-group { all | <qos-grp-val> } [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure QoS related configuration
eoq	Extended Output Queue(EOQ) related configuration
stats-class	Select class for which to report the statistics
qos-group	Qos Group
qos-grp-val	QoS group value
all	all Qos Groups
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos include ipg

[no] { platform | hardware } qos include { ipg [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
include	include specific configaration param
ipg	Select whether to include IPG in Shaping/Policing
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos ing

[no] { platform | hardware } qos { ing-pg-no-min [ pgmin <pgmin> ] [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
ing-pg-no-min	Enable PG Min
pgmin	(Optional) Set PG Min Value
pgmin	(Optional) PG Min Value
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos ing

[no] { platform | hardware } qos { ing-pg-share [ module <module> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
ing-pg-share	Select Ingress PG Shared Buffer Usage
module	(Optional) Specify a module number
module	(Optional) Specify a module number

Command Mode

/exec/configure

platform qos mac ipg

{ platform | hardware } qos mac ipg <val> | no { platform | hardware } qos mac ipg [ <val> ]

Syntax Description


no	Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
mac	MAC
ipg	Mac IPG Value
val	new Mac IPG value in byte

Command Mode

/exec/configure

platform qos nodrop-PG-thresholds-FX PG-size

[no] { platform | hardware } qos nodrop-PG-thresholds-FX PG-size <pg-total>

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
nodrop-PG-thresholds-FX	Configure No-drop Pool Group thresholds for FX platforms
PG-size	Configure No-drop Pool Group size
pg-total	Pool Group size

Command Mode

/exec/configure

platform qos nodrop-PG-thresholds PG-size

[no] { platform | hardware } qos nodrop-PG-thresholds PG-size <pg-total>

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
nodrop-PG-thresholds	Configure No-drop Pool Group thresholds
PG-size	Configure No-drop Pool Group size
pg-total	Pool Group size

Command Mode

/exec/configure

platform qos nodrop-PG-thresholds PG-size Red-threshold Yellow-threshold Green-threshold

[no] { platform | hardware } qos nodrop-PG-thresholds PG-size <pg-total> Red-threshold <pg-red> Yellow-threshold <pg-yellow> Green-threshold <pg-green>

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
nodrop-PG-thresholds	Configure No-drop Pool Group thresholds for EX platforms
PG-size	Configure No-drop Pool Group size
pg-total	Pool Group size
Red-threshold	Configure No-drop PG red threshold
pg-red	PG red threshold
Yellow-threshold	Configure No-drop PG yellow threshold
pg-yellow	PG yellow threshold
Green-threshold	Configure No-drop PG green threshold
pg-green	PG green threshold

Command Mode

/exec/configure

platform qos nodrop-queue-thresholds-FX Queue-green

[no] { platform | hardware } qos nodrop-queue-thresholds-FX Queue-green <q-green>

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
nodrop-queue-thresholds-FX	Configure No-drop PG's Queue thresholds for FX platforms
Queue-green	Configure No-drop PG Queue green threshold
q-green	PG Queue green threshold

Command Mode

/exec/configure

platform qos nodrop-queue-thresholds-roc Queue-green

[no] { platform | hardware } qos nodrop-queue-thresholds-roc Queue-green <q-green>

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
qos	Configure qos related configuration
nodrop-queue-thresholds-roc	Configure No-drop PG's Queue thresholds
Queue-green	Configure No-drop PG Queue green threshold
q-green	PG Queue green threshold

Command Mode

/exec/configure

platform qos nodrop-queue-thresholds Queue-green

[no] { platform | hardware } qos nodrop-queue-thresholds Queue-yellow <q-yellow> Queue-green <q-green>

Syntax Description


no	(Optional) Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information

Bias-Free Language

Results

Chapter: P Commands

P Commands

packet-size

param-list param-list

parity

parity

passive-interface default

passive-interface default

passive-interface default

passive-interface default

password

password

password

password prompt username

password secure-mode

password strength-check

path-option dynamic explicit identifier

path-selection metric igp

path-selection metric igp

path-selection overload allow

path

path next-hop out-label-stack

pathtrace nve

pause

pause

pause buffer-size2 pause-threshold2 resume-threshold2

pause priority

payload

payload test pattern-type pad

pcc

pce-address ipv4

pcep

pcep

peer-gateway

peer-ip

peer-keepalive destination

peer-switch

peer-type fabric

peer-vtep

peer local service

peer local service

peer vpc

per-ingress-port-mtu-mode

perf

periodic-inventory notification

periodic-inventory notification interval

periodic to

periodic to

permit interface

permit vlan

permit vrf

permit vsan

personality

personality backup

personality restore

phone-contact

pim

pim

ping

ping6

ping mpls

ping nve

ping sr-mpls

platform access-list capture

platform access-list fp_dnl

platform access-list update

platform acl tap-agg

platform forwarding interface statistics mode mpls

platform forwarding layer-2 f1 exclude supervisor

platform ip verify

platform ipv6 verify

platform qos

platform qos

platform qos

platform qos

platform qos

platform qos