C Commands

cabundle url

[no] cabundle url <source_uri>

Syntax Description

no

(Optional) Negate a command or set its defaults

cabundle

Configure cabundle

url

Configure cabundle url

source_uri

Select source http URL

Command Mode

  • /exec/configure/trustpool

callhome

callhome

Syntax Description

callhome

Enter the callhome configuration mode

Command Mode

  • /exec/configure

callhome send configuration

callhome send configuration

Syntax Description

callhome

callhome commands

send

send a command callhome message

configuration

configuration type

Command Mode

  • /exec

callhome send diagnostic

callhome send diagnostic

Syntax Description

callhome

callhome commands

send

send a command callhome message

diagnostic

dignostic command

Command Mode

  • /exec

callhome test

callhome test

Syntax Description

callhome

callhome commands

test

send a test callhome message

Command Mode

  • /exec

callhome test inventory

callhome test inventory

Syntax Description

callhome

callhome commands

test

send a test callhome message

inventory

send a dummy callhome inventory

Command Mode

  • /exec

candidate-paths

[no] candidate-paths

Syntax Description

no

(Optional) Negate a command or set its defaults

candidate-paths

Enter candidate-paths

Command Mode

  • /exec/configure/sr/te/color

candidate-paths

[no] candidate-paths

Syntax Description

no

(Optional) Negate a command or set its defaults

candidate-paths

Enter candidate-paths

Command Mode

  • /exec/configure/sr/te/pol

capability additional-paths receive

[ no | default ] capability additional-paths receive [ disable ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

capability

Advertise capability to the peer

additional-paths

Additional paths capability

receive

Additional paths Receive capability

disable

(Optional) Do not advertise additional paths Receive capability

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn

capability additional-paths send

[ no | default ] capability additional-paths send [ disable ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

capability

Advertise capability to the peer

additional-paths

Additional paths capability

send

Additional paths Send capability

disable

(Optional) Do not advertise additional paths Send capability

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn

capability suppress 4-byte-as

[ no | default ] capability suppress 4-byte-as

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

capability

Capability

suppress

Suppress sending out capability

4-byte-as

Suppress 4-byte AS Capability

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor-sess

capability vrf-lite

[no] capability vrf-lite [ evpn ]

Syntax Description

no

(Optional) Negate a command or set its defaults

capability

Capability

vrf-lite

Enable VRF-lite support

evpn

(Optional) Ethernet VPN

Command Mode

  • /exec/configure/router-ospf/vrf

capture

[no] capture { latency exceeding-threshold <time> { nano-sec | micro-sec | milli-sec } }

Syntax Description

capture

Events to be logged

latency

Latency

exceeding-threshold

Latency threshold limit

time

time range <0-65535>

nano-sec

time in nano seconds

micro-sec

time in micro seconds

milli-sec

time in milli seconds

Command Mode

  • /exec/configure/config-fte-event/group-latency-events

capture

[no] capture { buffer-drops | acl-drops | fwd-drops | blackhole }

Syntax Description

capture

Events to be logged

buffer-drops

Buffer drops

acl-drops

ACL drops

fwd-drops

Forward drops

blackhole

Blackhole

Command Mode

  • /exec/configure/config-fte-event/group-drop-events

capture session

[no] capture session <session-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

capture

Enable packet capture on this filter for session

session

Session ID <1-48> for this session

session-id

Session ID <1-48> for this session

Command Mode

  • /exec/configure/ipacl /exec/configure/ipv6acl /exec/configure/macacl /exec/configure/arpacl

carrier-delay

carrier-delay { <sec_val> | msec <msec_val> } | no carrier-delay

Syntax Description

no

Negate a command or set its defaults

carrier-delay

Specify delay for interface transitions

sec_val

Carrier Transitions delay seconds

msec

Carrier Transitions delay milliseconds

msec_val

Carrier Transitions delay milliseconds

Command Mode

  • /exec/configure/if-vlan-common

catena

{ catena <instance-name> } | { no catena <instance-name> }

Syntax Description

no

Negate a command or set its defaults

catena

instance

instance-name

instance-name

Command Mode

  • /exec/configure

catena device-group

{ catena device-group <device-grp-name> } | { no catena device-group <device-grp-name> }

Syntax Description

no

Negate a command or set its defaults

catena

instance

device-group

device group

device-grp-name

device-grp-name

Command Mode

  • /exec/configure

catena port-acl

{ catena port-acl <port-acl-name> } | { no catena port-acl <port-acl-name> }

Syntax Description

no

Negate a command or set its defaults

catena

instance

port-acl

port acl

port-acl-name

port-acl-name

Command Mode

  • /exec/configure

catena port-group

{ catena port-group <port-group-name> } | { no catena port-group <port-group-name> }

Syntax Description

no

Negate a command or set its defaults

catena

instance

port-group

port group

port-group-name

port-group-name

Command Mode

  • /exec/configure

catena vlan-group

{ catena vlan-group <vlan-grp-name> } | { no catena vlan-group <vlan-grp-name> }

Syntax Description

no

Negate a command or set its defaults

catena

instance

vlan-group

vlan group

vlan-grp-name

vlan-grp-name

Command Mode

  • /exec/configure

cbts-member tunnel-te

[no] cbts-member tunnel-te <tunnel-num>

Syntax Description

no

(Optional) Negate a command or set its defaults

cbts-member

Member Tunnel

tunnel-te

Tunnel Interface

tunnel-num

Tunnel Interface number

Command Mode

  • /exec/configure/if-te

cd

cd <uri0>

Syntax Description

cd

Change current directory

uri0

Enter the name of the directory

Command Mode

  • /exec

cdp advertise v1

cdp advertise { v1 | v2 } | no cdp advertise [ v1 | v2 ]

Syntax Description

no

Negate a command or set its defaults

cdp

Configure CDP parameters

advertise

Highest CDP version supported on the switch

v1

CDP Version 1

v2

CDP Version 2

Command Mode

  • /exec/configure

cdp enable

[no] cdp enable

Syntax Description

no

(Optional) Negate a command or set its defaults

cdp

Configure CDP interface parameters

enable

Enable/disable CDP on the interface

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

cdp enable

[no] cdp enable

Syntax Description

no

(Optional) Negate a command or set its defaults

cdp

Configure CDP interface parameters

enable

Enable/disable CDP on all interfaces

Command Mode

  • /exec/configure

cdp format device-id

[no] cdp format device-id { mac-address | serial-number | system-name }

Syntax Description

no

(Optional) Negate a command or set its defaults

cdp

Configure CDP parameters

format

Device ID format for CDP

device-id

Device ID format for CDP

mac-address

Mac-address of the Chassis

serial-number

Chassis Serial Number/OUI

system-name

System name/Fully Qualified Domain Name (Default)

Command Mode

  • /exec/configure

cdp holdtime

[no] cdp holdtime <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

cdp

Configure CDP parameters

holdtime

CDP hold time advertised (in seconds)

i0

CDP hold time advertised (in seconds)

Command Mode

  • /exec/configure

cdp timer

[no] cdp timer <i1>

Syntax Description

no

(Optional) Negate a command or set its defaults

cdp

Configure CDP parameters

timer

CDP refresh time interval (in seconds)

i1

CDP refresh time interval (in seconds)

Command Mode

  • /exec/configure

certificate

certificate <file-name> <host-name> | no certificate

Syntax Description

no

Negate a command or set its defaults

certificate

Specify certificate

file-name

.pem certificate filename

host-name

hostname associated with certificate

Command Mode

  • /exec/configure/telemetry

cfs debug all

cfs debug all

Syntax Description

cfs

CFS parameters

debug

Internal command for debugs

all

Internal command for debugs

Command Mode

  • /exec

cfs distribute

[no] cfs distribute

Syntax Description

no

(Optional) Negate a command or set its defaults

distribute

Enable fabric wide distribution

Command Mode

  • /exec/configure

cfs eth cos

{ cfs eth cos <i0> | no cfs eth cos [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

eth

ETH configurations

cos

Configure CFS Ethernet COS value

i0

COS Value Range

Command Mode

  • /exec/configure

cfs eth distribute

[no] cfs eth distribute

Syntax Description

no

(Optional) Negate a command or set its defaults

eth

ETH configurations

distribute

Enable CFS distribution over Ethernet

Command Mode

  • /exec/configure

cfs ipv4 distribute

[no] cfs ipv4 distribute

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv4

IPv4 configurations

distribute

Enable CFS distribution over IPv4

Command Mode

  • /exec/configure

cfs ipv4 mcast-address

{ cfs ipv4 mcast-address <ip0> | no cfs ipv4 mcast-address [ <ip0> ] }

Syntax Description

no

Negate a command or set its defaults

ipv4

IPv4 configurations

mcast-address

Configure IPv4 multicast address

ip0

Admin scope [239.255/16, 239.192/16-239.251/16]

Command Mode

  • /exec/configure

cfs ipv6 distribute

[no] cfs ipv6 distribute

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

IPv6 configurations

distribute

Enable CFS distribution over IPv6

Command Mode

  • /exec/configure

cfs ipv6 mcast-address

{ cfs ipv6 mcast-address <ipv60> | no cfs ipv6 mcast-address [ <ipv60> ] }

Syntax Description

no

Negate a command or set its defaults

ipv6

IPv6 configurations

mcast-address

Configure IPv6 multicast address

Command Mode

  • /exec/configure

cfs region

[no] cfs region <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

region

Regions to limit the distribution scope of application(s)

i0

Region Id

Command Mode

  • /exec/configure

chain

{ chain <chain-id> } | { no chain <chain-id> }

Syntax Description

no

Negate a command or set its defaults

chain

chain for instance

chain-id

chain ID

Command Mode

  • /exec/configure/catena

change-password

change-password [ old-password <s1> new-password <s2> ]

Syntax Description

change-password

Change your password

old-password

(Optional) Current password for the user

s1

(Optional) Current password for the user (clear text)

new-password

(Optional) New password for the user

s2

(Optional) New password for the user (clear text)

Command Mode

  • /exec

channel-group

[no] channel-group [ <channel-id> [ mode { active | passive | on } ] ]

Syntax Description

no

Negate a command or set its defaults

channel-group

Configure port channel parameters

mode

(Optional) Specify channeling mode

active

(Optional) Set channeling mode to ACTIVE

passive

(Optional) Set channeling mode to PASSIVE

on

(Optional) Set channeling mode to ON

channel-id

(Optional) Specify a port-channel number

Command Mode

  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

channel-group

channel-group <channel-id> | no channel-group

Syntax Description

no

Negate a command or set its defaults

channel-group

add to/remove from a port-channel

channel-id

Specify a port-channel number

Command Mode

  • /exec/configure/if-fc /exec/configure/if-bay /exec/configure/if-ext /exec/configure/if-gig-ether /exec/configure/if-fcip

channel-group

channel-group <channel-id> [ mode { active | passive | on } ]

Syntax Description

channel-group

Configure port channel parameters

mode

(Optional) Specify channeling mode

active

(Optional) Set channeling mode to ACTIVE

passive

(Optional) Set channeling mode to PASSIVE

on

(Optional) Set channeling mode to ON

channel-id

Specify a port-channel number

Command Mode

  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

channel-group

[no] channel-group

Syntax Description

no

Negate a command or set its defaults

channel-group

Configure port channel parameters

Command Mode

  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

channel-group force

channel-group <channel-id> force

Syntax Description

channel-group

add to/remove from a san-port-channel

channel-id

Specify a san-port-channel number

force

Forcefully add a port

Command Mode

  • /exec/configure/if-fc /exec/configure/if-gig-ether /exec/configure/if-fcip

channel-group force

channel-group <channel-id> force [ mode { active | passive | on } ] | no channel-group <channel-id> force [ mode { active | passive | on } ]

Syntax Description

no

Negate a command or set its defaults

channel-group

add to/remove from a port-channel

channel-id

Specify a port-channel number

force

Forcefully add a port

mode

(Optional) Specify channeling mode

active

(Optional) Set channeling mode to ACTIVE

passive

(Optional) Set channeling mode to PASSIVE

on

(Optional) Set channeling mode to ON

Command Mode

  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

channel mode

[no] channel mode

Syntax Description

no

Negate a command or set its defaults

channel

Set the channel mode for the san-port-channel interface

mode

Set the channel mode for the san-port-channel interface

Command Mode

  • /exec/configure/if-san-port-channel

channel mode active

channel mode active | no channel mode active

Syntax Description

no

Negate a command or set its defaults

channel

Set the channel mode for the san-port-channel interface

mode

Set the channel mode for the san-port-channel interface

active

configure ACTIVE san-port-channel

Command Mode

  • /exec/configure/if-san-port-channel

chassis-family fretta

[no] chassis-family fretta

Syntax Description

no

(Optional) Negate a command or set its defaults

chassis-family

Configure chassis family type

fretta

Confiure chassis family type to Fretta

Command Mode

  • /exec/configure

checkpoint

[no] checkpoint <chkpoint_name>

Syntax Description

no

Negate a command or set its defaults

checkpoint

Delete configuration rollback checkpoint

chkpoint_name

Checkpoint name

Command Mode

  • /exec

checkpoint

checkpoint { [ <name> ] [ description <descr_str> ] | file <file_uri> }

Syntax Description

checkpoint

Create configuration rollback checkpoint

name

(Optional) Checkpoint name

file

Create configuration rollback checkpoint to file

file_uri

Checkpoint file path

description

(Optional) checkpoint description for the given checkpoint

descr_str

(Optional) checkpoint description(can include spaces)

Command Mode

  • /exec

cipher-suite

[no] cipher-suite <suite>

Syntax Description

cipher-suite

Configure Cipher Suite

suite

Cipher Suite options

Command Mode

  • /exec/configure/macsec-policy

class-map

[no] class-map [ type qos ] [ <any_or_all> ] <cmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

class-map

Configure a class map

type

(Optional) Specify the type of this class-map

qos

(Optional) Qos class

any_or_all

(Optional) Enter match-any or match-all

cmap-name

class-map name

Command Mode

  • /exec/configure

class-map type control-plane

[no] class-map type control-plane [ <opt_any_or_all> ] <cmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

class-map

Configure a class map

type

Specify the type of this class-map

control-plane

Control-Plane

opt_any_or_all

(Optional) Enter match-any or match-all

cmap-name

Class-map name

Command Mode

  • /exec/configure

class-map type network-qos

[no] class-map type network-qos [ match-any ] <cmap-name-nq>

Syntax Description

no

(Optional) Negate a command or set its defaults

class-map

Configure a class map

type

Specify the type of this class-map

network-qos

Network QoS class

match-any

(Optional) Match on any criteria

cmap-name-nq

class-map name

Command Mode

  • /exec/configure

class-map type psp

[no] class-map type psp [ <any_or_all> ] { <cmap-name-plc> | { handle <ppf_id> } } [ sequence <seq_no> ] [ client <clienttype> <clientID> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

class-map

Configure a class map

type

Specify the type of this class-map

psp

PSP class

any_or_all

(Optional) Enter match-any or match-all

cmap-name-plc

class-map name

handle

Handle

ppf_id

PPF ID

sequence

(Optional) sequence

seq_no

(Optional) Sequence number

client

(Optional) set client type

clienttype

(Optional) cli/onep

clientID

(Optional) client appID

Command Mode

  • /exec/configure

class-map type queuing

[no] class-map type queuing [ <any_or_all> ] { xxx <cmap-enum-name> | <cmap-dce-name> | zzz <cmap-name-hque> }

Syntax Description

no

(Optional) Negate a command or set its defaults

class-map

Configure a class map

type

Specify the type of this class-map

queuing

Queuing class

any_or_all

(Optional) Enter match-any

cmap-enum-name

xxx

xxx

zzz

zzz

cmap-dce-name

Queuing class-map name

cmap-name-hque

Hierarchical class-map name

Command Mode

  • /exec/configure

class-map type queuing

[no] class-map type queuing { <cmap-dce-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

class-map

Configure a class map

type

Specify the type of this class-map

queuing

Queuing class

cmap-dce-name

Queuing class-map name

Command Mode

  • /exec/configure

class

[no] class [ type qos ] <cmap-name> [ insert-before [ type qos1 ] <cmap-name2> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

class

Policy Criteria

type

(Optional) Specify the type of class

qos

(Optional) Match on Qos class

cmap-name

class map name

insert-before

(Optional) Insert this class before another class

qos1

(Optional) Insert before Qos class

cmap-name2

(Optional) class map name

Command Mode

  • /exec/configure/policy-map

class

class { <cmap-name> [ insert-before <cmap-name2> ] | class-default } | no class { <cmap-name> | class-default }

Syntax Description

no

Negate a command or set its defaults

class

Attach class map to policy map

cmap-name

Class-map name

insert-before

(Optional) Insert this class before another class

cmap-name2

(Optional) class map name before which insertion should happen

class-default

Use class default

Command Mode

  • /exec/configure/pmap

class __inline__

[no] class __inline__ [ type psp ] <cmap-name-plc> [ insert-before <cmap-name2> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

class

Policy Criteria

__inline__

Inline Class

type

(Optional) Specify the type of class

psp

(Optional) Match on PSP class

cmap-name-plc

class map name

insert-before

(Optional) Insert this class before another class

cmap-name2

(Optional) class map name

Command Mode

  • /exec/configure/policy-map/type/plc

class class-default

[no] class class-default

Syntax Description

no

(Optional) Negate a command or set its defaults

class

Policy Criteria

class-default

System default class matching otherwise unclassified packets

Command Mode

  • /exec/configure/policy-map

class type network-qos

[no] class type network-qos <cmap-name-nq>

Syntax Description

no

(Optional) Negate a command or set its defaults

class

Match on network-qos class-map

type

Specify the type of this class-map

network-qos

Network QoS policy

cmap-name-nq

Match class-map name

Command Mode

  • /exec/configure/policy-map/type/uf

class type network-qos class-default

[no] class type network-qos class-default

Syntax Description

no

(Optional) Negate a command or set its defaults

class

Match on network-qos class-map

type

Specify the type of this class-map

network-qos

Network QoS policy

class-default

System default class matching otherwise not classified cos values

Command Mode

  • /exec/configure/policy-map/type/uf

class type psp

[no] class type psp { <cmap-name-plc> | { handle1 <ppf_id1> } } [ insert-before { <cmap-name2> | { handle2 <ppf_id2> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

class

Policy Criteria

type

Specify the type of class

psp

Match on PSP class

cmap-name-plc

class map name

handle1

Handle1

ppf_id1

PPF ID1

insert-before

(Optional) Insert this class before another class

cmap-name2

(Optional) class map name

handle2

(Optional) Handle2

ppf_id2

(Optional) PPF ID2

Command Mode

  • /exec/configure/policy-map/type/plc

class type queuing

[no] class type queuing { xxx <cmap-enum-name> | <cmap-dce-name> | zzz <cmap-name-hque> } [ insert-before type queuing1 yyy <xcmap-enum-name> ]

Syntax Description

xxx

xxx

yyy

(Optional) yyy

zzz

zzz

no

(Optional) Negate a command or set its defaults

class

Policy Criteria

type

Specify the type of class

queuing

Match on Queuing class

cmap-enum-name

cmap-dce-name

Queuing class-map name

cmap-name-hque

Hierarchical class-map name

insert-before

(Optional) Insert this class before another class

queuing1

(Optional) Insert before Queuing class

xcmap-enum-name

(Optional)

Command Mode

  • /exec/configure/policy-map/type/queuing

clear

clear { { ip route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] } | { routing [ vrf { <vrf-name> | <vrf-known-name> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] } } { <all> | { { <ip-addr> | <ip-prefix> } [ { [ <nh-addr> | <nh-addr-v6> ] [ <nh-interface> ] } | { <nh-label> } ] } } [ no-ufdm ]

Syntax Description

clear

Reset functions

route

Clear routing information

routing

Clear routing information

vrf

(Optional) Clear per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

Clear IP commands

ipv4

(Optional) Clear IP commands

unicast

(Optional) Clear unicast information

topology

(Optional) Clear per-topology information

topology-name

(Optional) Topology name

all

Clear all routes

ip-addr

Clear single host route

ip-prefix

Clear single exact match route

nh-addr

(Optional) Clear single path

nh-label

(Optional) Clear single binding label path

nh-interface

(Optional) Interface Name

no-ufdm

(Optional) Do not tell UFDM about the change

Command Mode

  • /exec

clear

clear { { ipv6 route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] } | { routing [ vrf { <vrf-name> | <vrf-known-name> } ] ipv6 [ unicast ] [ topology <topology-name> ] } } { <all> | { { <ipv6-addr> | <ipv6-prefix> } [ { [ <nh-addr> ] [ <nh-interface> ] } | { <nh-label> } ] } } [ no-ufdm ]

Syntax Description

clear

Reset functions

route

Clear routing information

routing

Clear routing information

vrf

(Optional) Clear per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Clear IPv6 commands

unicast

(Optional) Clear unicast information

topology

(Optional) Clear per-topology information

topology-name

(Optional) Topology name

all

Clear all routes

nh-label

(Optional) Clear single binding label path

nh-interface

(Optional) Interface Name

no-ufdm

(Optional) Do not tell UFDM about the change

Command Mode

  • /exec

clear

clear { { ip eigrp [ <eigrp-ptag> ] topology { { <address> <mask> } | { <prefix> } } [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { ipv6 eigrp [ <eigrp-ptag> ] topology { <ipv6-prefix> } [ vrf { <vrf-name> | <vrf-known-name> | all } ] } }

Syntax Description

clear

Reset functions

ip

Clear IP commands

ipv6

Clear IPv6 commands

eigrp

EIGRP clear commands

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

topology

Clear IP-EIGRP topology table entry

address

Network to display information about

mask

Network mask

prefix

IP prefix <network>/<length>, e.g., 192.168.0.0/16

eigrp-ptag

(Optional)

Command Mode

  • /exec

clear

clear { { ip eigrp [ <eigrp-ptag> ] neighbors { * | <address> | <interface> } [ soft ] [ no-goodbye ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { ipv6 eigrp [ <eigrp-ptag> ] neighbors { * | <ipv6-addr> | <interface> } [ soft ] [ no-goodbye ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } }

Syntax Description

clear

Reset functions

ip

Clear IP commands

ipv6

Clear IPv6 commands

eigrp

EIGRP clear commands

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

neighbors

Clear EIGRP neighbors

*

Clear all EIGRP neighbors

address

IP-EIGRP neighbor address

interface

Interface

soft

(Optional) Soft reset

no-goodbye

(Optional) No goodbye

eigrp-ptag

(Optional)

Command Mode

  • /exec

clear aaa client radius statistics

clear aaa client radius statistics <hostipname>

Syntax Description

clear

Reset functions

aaa

clear aaa information

client

clear AAA client info

radius

clear radius dynamic authorization client info

statistics

clear radius dynamic authorization client statistics

hostipname

IPV4/IPV6 address or DNS name of RADIUS client

Command Mode

  • /exec

clear aaa local user blocked username

clear aaa local user blocked { username <s0> | all }

Syntax Description

clear

Reset functions

aaa

Configure aaa functions

local

Local username

user

Local system user

blocked

Clear blocked user

username

Blocked username

s0

Enter the username

all

Clear all the blocked users

Command Mode

  • /exec

clear aaa server radius statistics

clear aaa server radius statistics

Syntax Description

clear

Reset functions

aaa

clear aaa information

server

clear Local AAA server info

radius

clear local radius server info

statistics

clear local radius server statistics

Command Mode

  • /exec

clear access-list counters

clear [ <ip_ipv6_mac> ] access-list counters [ <name> ]

Syntax Description

clear

Reset functions

ip_ipv6_mac

(Optional) IP/IPv6/MAC

access-list

Clear access list statistical information

counters

Clear access list counters

name

(Optional) List name

Command Mode

  • /exec

clear access-list hardware counters

clear access-list hardware counters [ module <module> ]

Syntax Description

clear

Reset functions

access-list

Clear access list statistical information

hardware

hardware information

counters

Clear access list counters

module

(Optional) Slot/module

module

(Optional) Slot/module number

Command Mode

  • /exec

clear access-list ipsg stats

clear access-list ipsg stats [ module <module> ] [ instance <instance_number> ]

Syntax Description

clear

Reset functions

access-list

access-list

ipsg

ipsg

stats

Clear Statistics of IPSG drop entries

module

(Optional) Slot/module

module

(Optional) Slot/module number

instance

(Optional) ASIC Instance Number

instance_number

(Optional) ASIC Instance Number in Decimal

Command Mode

  • /exec

clear accounting log

clear accounting log

Syntax Description

clear

Reset functions

accounting

Clear accounting log(s) in all vdcs

log

Clear the accounting log(s) in all vdcs

Command Mode

  • /exec

clear aclqos cl-qos

clear aclqos cl-qos

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

cl-qos

cl-qos logs of ACLQOS

Command Mode

  • /exec

clear aclqos fab

clear aclqos fab

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

fab

Fabric logs of ACLQOS

Command Mode

  • /exec

clear aclqos fc

clear aclqos fc

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

fc

fc logs of ACLQOS

Command Mode

  • /exec

clear aclqos libdrv

clear aclqos libdrv

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

libdrv

libdrv logs of ACLQOS

Command Mode

  • /exec

clear aclqos map

clear aclqos map

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

map

map logs of ACLQOS

Command Mode

  • /exec

clear aclqos merge

clear aclqos merge

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

merge

merge logs of ACLQOS

Command Mode

  • /exec

clear aclqos pl

clear aclqos pl

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

pl

pl logs of ACLQOS

Command Mode

  • /exec

clear aclqos ppf-parse

clear aclqos ppf-parse

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

ppf-parse

ppf-parse logs of ACLQOS

Command Mode

  • /exec

clear aclqos ppf

clear aclqos ppf

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

ppf

ppf logs of ACLQOS

Command Mode

  • /exec

clear aclqos qng-hw

clear aclqos qng-hw

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

qng-hw

Qng logs of ACLQOS

Command Mode

  • /exec

clear aclqos qng

clear aclqos qng

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

qng

Qng logs of ACLQOS

Command Mode

  • /exec

clear aclqos rl

clear aclqos rl

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

rl

RL logs of ACLQOS

Command Mode

  • /exec

clear aclqos rm

clear aclqos rm

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

rm

RM logs of ACLQOS

Command Mode

  • /exec

clear aclqos sch

clear aclqos sch

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

sch

Sch logs of ACLQOS

Command Mode

  • /exec

clear aclqos stats

clear aclqos stats

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

stats

stats logs of ACLQOS

Command Mode

  • /exec

clear aclqos tbl

clear aclqos tbl

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

tbl

tbl logs of ACLQOS

Command Mode

  • /exec

clear aclqos trace-detail

clear aclqos trace-detail

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

trace-detail

detail logs of ACLQOS

Command Mode

  • /exec

clear aclqos trace

clear aclqos trace

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

trace

trace logs of ACLQOS

Command Mode

  • /exec

clear aclqos uf

clear aclqos uf

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

uf

UF logs of ACLQOS

Command Mode

  • /exec

clear bfd statistics

clear bfd statistics

Syntax Description

clear

Clear

bfd

bfd

statistics

statistics

Command Mode

  • /exec

clear bgp

clear bgp { ipv4 { unicast | multicast } policy statistics { { redistribute [ { { eigrp | isis | ospf | rip } <tag> } | static | direct | amt | lisp | hmm | am ] } | { neighbor <neighbor-id> [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] } | { dampening } | { network { <ip-addr> mask <ip-mask> | <ip-prefix> } } | { aggregate-address { <ip-addr> <ip-mask> | <ip-prefix> } { suppress-map | advertise-map } } } | { vpnv4 | vpnv6 } unicast policy statistics { neighbor <neighbor-id> [ { route-map | filter-list | prefix-list } { in | out } ] } | ipv6 { unicast | multicast } policy statistics { { redistribute [ { { eigrp | isis | ospfv3 | rip } <tag> } | static | direct | amt | lisp | hmm | am ] } | { neighbor { <neighbor-id> | <ipv6-neighbor-id> } [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] } | { dampening } | { network <ipv6-prefix> } | { aggregate-address <ipv6-prefix> { suppress-map | advertise-map } } } }

Syntax Description

clear

Reset functions

ipv4

Clear IPv4 address-family

ipv6

Clear IPv6 address-family

vpnv4

Clear VPNv4 address-family

vpnv6

Clear VPNv6 address-family

bgp

Clear BGP sessions

unicast

Clear unicast address-family

multicast

Clear multicast address-family

policy

Clear policy related information

statistics

Clear Route Filter statistics

redistribute

Statistics for redistribution

isis

(Optional) ISO IS-IS

ospf

(Optional) Open Shortest Path First (OSPF)

ospfv3

(Optional) Open Shortest Path First v3

rip

(Optional) Routing Information Protocol

eigrp

(Optional) Enhanced Interior Gateway Protocol

static

(Optional) Static routes

direct

(Optional) Directly connected

amt

(Optional) AMT anycast prefix

lisp

(Optional) LISP EID-prefixes in the non-default VRF

hmm

(Optional) HMM prefix

am

(Optional) AM routes (learned via ARP)

tag

(Optional) Source protocol tag

neighbor

Clear neighbor specific counters

neighbor-id

Neighbor IPv4 address

route-map

(Optional) Neighbor route-map

prefix-list

(Optional) Neighbor prefix-list

filter-list

(Optional) Neighbor filter-list

out

(Optional) Outbound policy

in

(Optional) Inbound policy

default-originate

(Optional) Default-originate policy

dampening

Clear dampening info

network

Configured IP prefix to advertise

aggregate-address

Configured BGP aggregate prefixes

suppress-map

Statistics of suppress policy

advertise-map

Statistics of advertise policy

ip-addr

IP network advertised

mask

Configured mask of the IP prefix advertised

ip-mask

Dotted 4-octet mask

ip-prefix

IP prefix in CIDR format

Command Mode

  • /exec

clear bgp bmp stats server

clear bgp bmp stats server { <server-id> | all }

Syntax Description

clear

Reset functions

bgp

Clear BGP sessions

bmp

Clear BMP

stats

Server Stats

server

BMP Server

server-id

Server ID

all

All BMP Servers

Command Mode

  • /exec

clear bgp event-history

clear bgp event-history { <bgp-event-hist> | all | msgs | sdwrap-errors }

Syntax Description

clear

Reset functions

bgp

Clear BGP sessions

event-history

Clear event-history buffers

bgp-event-hist

Event History

all

All event history buffers

sdwrap-errors

Clear sdwrap-error logs of BGP

msgs

Clear message logs of BGP

Command Mode

  • /exec

clear bgp private

clear bgp private { all | global | threads | session | debug | io | memory | af | damp | lists | attr [ <ip-prefix> | <ipv6-prefix> ] | rpm-info [ <rpm-name> { <ip-prefix> | <ipv6-prefix> } ] | neighbor { <neighbor-id> | <ipv6-neighbor-id> } | slab | mqstat | ipc | rnh | rpm-attribute-cache | rpm-comm-attr-cache | peer-template <peer-template-name> | aggregates [ summary ] | bestpath }

Syntax Description

clear

Reset functions

bgp

Clear BGP sessions

private

Clear internal BGP counters

all

Clear all info

global

Clear global info

threads

Clear thread info

session

Clear session info

debug

Clear debug info

io

Clear IO info

memory

Clear memory info

af

Clear AF info

damp

Clear dampening info

lists

Clear BGP internal lists

attr

Clear BGP attributes

rpm-info

Clear BGP policy outbound info

ip-prefix

(Optional) Clear attribute for a prefix

neighbor

Clear neighbor specific counters

neighbor-id

Neighbor IP address

rpm-name

(Optional) Route-map name

slab

Clear information about SLABs used

mqstat

Clear message queue stats

ipc

Clear ipc information

rnh

Clear recursive next hops

aggregates

Clear information about aggregates

rpm-attribute-cache

Clear rpm attribute cache statistics

rpm-comm-attr-cache

Clear rpm community attribute cache statistics

peer-template

Clear information about a peer-template

bestpath

Clear internal information about bestpath

summary

(Optional) Summary only

peer-template-name

Peer-template name

Command Mode

  • /exec

clear bootvar log

clear bootvar log

Syntax Description

clear

Reset functions

bootvar

Clear the bootvar log

log

Clear the bootvar log

Command Mode

  • /exec

clear cdp counters

clear cdp { counters [ interface <if0> ] | table [ interface1 <if1> ] }

Syntax Description

clear

Reset functions

cdp

Cisco Discovery Protocol

counters

Clear CDP counters on all interfaces

interface

(Optional) Clear CDP counters on an interface

if0

(Optional)

table

Clear CDP cache on all interfaces

interface1

(Optional) Clear CDP cache on an interface

if1

(Optional)

Command Mode

  • /exec

clear checkpoint database

clear checkpoint database [ user | system ]

Syntax Description

clear

Reset functions

checkpoint

Clear configuration rollback checkpoint

database

Clear configuration rollback checkpoint database

user

(Optional) Clear configuration rollback checkpoint database for user checkpoints

system

(Optional) Clear configuration rollback checkpoint database for system checkpoints

Command Mode

  • /exec

clear cli history

clear cli history

Syntax Description

clear

Reset functions

cli

debug cli

history

history of cli commands

Command Mode

  • /exec

clear clis event-history objstr

clear clis event-history { objstr | objstr-errors }

Syntax Description

clear

Reset functions

clis

cli server

event-history

Event history logs for clis

objstr

Log of Object Store events

objstr-errors

Log of Object Store error events

Command Mode

  • /exec

clear controller accounting log

clear controller <ctrl-id> accounting log

Syntax Description

clear

Show running system information

controller

Controller command

ctrl-id

Controller id value

accounting

Accounting

log

Clear log information

Command Mode

  • /exec

clear copp statistics

clear copp statistics

Syntax Description

clear

Reset functions

copp

Clear policy information for copp

statistics

Clear statistics

Command Mode

  • /exec

clear cores

clear cores

Syntax Description

clear

Reset functions

cores

clear all core dumps for the switch

Command Mode

  • /exec

clear cores archive

clear cores archive [ file <s0> ]

Syntax Description

clear

Reset functions

cores

clear all cores for this vdc

archive

clear all core dump files for this vdc from logflash on this module

file

(Optional) delete a core file on logflash

s0

(Optional) Name of file in directory 'core

Command Mode

  • /exec

clear counters

clear counters

Syntax Description

clear

Reset functions

counters

Clear counters

Command Mode

  • /exec

clear counters buffers

clear counters buffers [ module <module> [ instance <instance> ] ] [ __readonly__ <clear_valid> ]

Syntax Description

clear

Reset functions

counters

Clear counters

buffers

Clear system buffer max cell usage counter

module

(Optional) Slot/module

module

(Optional) Slot/module number

instance

(Optional) ASIC Instance Number

instance

(Optional) ASIC Instance Number in Decimal

__readonly__

(Optional) Read Only

clear_valid

(Optional) Clear

Command Mode

  • /exec

clear counters interface

clear counters interface <ifindex1>

Syntax Description

clear

Reset functions

counters

Clear counters

interface

Clear interface counters

ifindex1

Clear interface counters

Command Mode

  • /exec

clear counters interface

clear counters interface <ifid>

Syntax Description

clear

Reset functions

counters

Clear counters

interface

Clear interface counters

ifid

Clear interface counters

Command Mode

  • /exec

clear counters interface

clear counters interface <ifindex>

Syntax Description

clear

Reset functions

counters

Clear counters

interface

Clear interface counters

ifindex

Clear interface counters

Command Mode

  • /exec

clear counters interface all

clear counters interface all

Syntax Description

clear

Reset functions

counters

Clear counters

interface

Clear interface counters

all

Clear all interface counters

Command Mode

  • /exec

clear counters interface snmp

clear counters interface <ifindex> snmp

Syntax Description

clear

Reset functions

counters

Clear counters

interface

Clear interface counters

ifindex

Clear interface counters

snmp

Clear snmp interface counters

Command Mode

  • /exec

clear counters mpls strip

clear counters mpls strip

Syntax Description

clear

Reset functions

mpls

Configure MPLS settings

strip

Stripping of MPLS headers

counters

stats/counters for labels

Command Mode

  • /exec

clear counters tah-buffers

clear counters tah-buffers [ module <module> ] [ { instance <instance> | { unit <unit> slice <slice> } } ]

Syntax Description

clear

Reset functions

counters

Clear counters

tah-buffers

Clear system buffer max cell usage counter

instance

(Optional) ASIC Instance Number

instance

(Optional) ASIC Instance Number in Decimal

unit

(Optional) Asic Number

unit

(Optional) Asic Number on the module

slice

(Optional) slice num on asic

slice

(Optional) slice number on asic

module

(Optional) Slot/module

module

(Optional) Slot/module number

Command Mode

  • /exec

clear crypto ca trustpool timer

clear crypto ca trustpool timer

Syntax Description

clear

Reset functions

crypto

Set crypto settings

ca

Configure certificate authority related information

trustpool

certificate trustpool

timer

clear trustpool timer

Command Mode

  • /exec/

clear debug-logfile

clear debug-logfile <s0>

Syntax Description

clear

Reset functions

debug-logfile

Remove the debug logfile

s0

Provide name of the file

Command Mode

  • /exec

clear debug logfile

clear debug logfile <s0>

Syntax Description

clear

Reset functions

debug

Debugging functions

logfile

Remove the debug logfile

s0

Provide name of the file

Command Mode

  • /exec

clear dot1x all

{ clear dot1x all } | { clear dot1x interface <if> } | { clear dot1x mac <addr> }

Syntax Description

clear

Reset functions

dot1x

dot1x configuration commands

all

Authenticator instances on all interfaces

mac

Specific MAC address of the Supplicant

if

target interface

addr

MAC Address

Command Mode

  • /exec

clear dot1x stats interface

{ clear dot1x stats interface <if> } | { clear dot1x stats mac <addr> }

Syntax Description

clear

Reset functions

dot1x

dot1x configuration commands

stats

clear stats

mac

Specific MAC address of the Supplicant

if

target interface

addr

MAC Address

Command Mode

  • /exec

clear ecp statistics

clear ecp statistics

Syntax Description

clear

Reset functions

ecp

ECP (Edge Control Protocol)

statistics

Clear ECP Statistics

Command Mode

  • /exec

clear eigrp event-history

clear eigrp [ <eigrp-ptag> ] event-history [ cli | notifications | all ]

Syntax Description

clear

Reset functions

eigrp

EIGRP clear commands

eigrp-ptag

(Optional) Process tag

event-history

Clear the event history buffers

notifications

(Optional) EIGRP Notifications

cli

(Optional) EIGRP CLI related events

all

(Optional) All event history buffers

Command Mode

  • /exec

clear ethpm config counter

clear ethpm config counter

Syntax Description

clear

clear command

ethpm

Test commands for ETHPM

config

config hashtable

counter

config hashtable entries

Command Mode

  • /exec

clear evb hosts

clear evb { hosts | vsi } [ force-standby ] [ { [ mac <mac-addr> | interface <intf-name> | vlan <vlan-id> | vni <vni-id> | ip <ip-addr> | ipv6 <ipv6-addr> ] + } ]

Syntax Description

clear

Reset functions

evb

EVB (Edge Virtual Bridge)

hosts

Clear EVB host information

vsi

Clear EVB vsi information

force-standby

(Optional) Force to clear standby entries

mac

(Optional) Clear entries by filtering MAC address

mac-addr

(Optional) MAC Address

interface

(Optional) Clear entries by filtering interface

intf-name

(Optional) Interface name

vlan

(Optional) Clear entries by filtering VLAN

vlan-id

(Optional) VLAN ID

vni

(Optional) Clear entries by filtering VNI

vni-id

(Optional) VNI

ip

(Optional) Clear entries by filtering IP address

ipv6

(Optional) Clear entries by filtering IPv6 address

ip-addr

(Optional) IPV4 host address

Command Mode

  • /exec

clear evb hosts

clear evb { hosts | vsi } [ force-standby ] *

Syntax Description

clear

Reset functions

evb

EVB (Edge Virtual Bridge)

hosts

Clear EVB host information

vsi

Clear EVB vsi information

force-standby

(Optional) Force to clear standby entries

*

Clear all entries (Should be a * character)

Command Mode

  • /exec

clear evb statistics

clear evb statistics

Syntax Description

clear

Reset functions

evb

EVB (Edge Virtual Bridge)

statistics

Clear EVB Statistics

Command Mode

  • /exec

clear fabric database dci vrf node-id

clear fabric database dci vrf { <vrf-name> | <vrf-known-name> } node-id <mgmt-ip-address> [ peer-id <peer-ip-address> ]

Syntax Description

clear

Reset functions

fabric

Fabric

database

Fabric Database

dci

DCI profile

vrf

Display per-VRF information

vrf-name

VRF name

vrf-known-name

Known VRF name

node-id

management ip address of this node

mgmt-ip-address

IP address in CIDR format

peer-id

(Optional) management ip address of peer

peer-ip-address

(Optional) IP address in CIDR format

Command Mode

  • /exec

clear fabric database host all vni

{ clear fabric database host { all | { vni <vni-id> } | { dot1q <vlan-id> } } [ re-sync ] } | { clear fabric database host vni <vni-id> re-apply } | { clear fabric database client uuid <uuid> }

Syntax Description

clear

Reset functions

fabric

database

host

Active Host to profile mapping

vni

Virtual Network Identifier

vni-id

dot1q

Dot1Q Encapsulation

vlan-id

re-apply

Download new config parameters and re-apply

re-sync

(Optional) Force to sync the host entry

all

Remove all entries

client

Auto-config client

uuid

Auto-config client UUID

uuid

UUID

Command Mode

  • /exec

clear fabric database host statistics

clear fabric database host statistics

Syntax Description

clear

Reset functions

fabric

Fabric

database

Fabric Database

host

Auto-configured Hosts

statistics

Statistics

Command Mode

  • /exec

clear fabric database include-vrf

clear fabric database include-vrf <vrf-name>

Syntax Description

clear

Reset functions

fabric

database

include-vrf

Include VRF name

vrf-name

VRF name

Command Mode

  • /exec

clear fabric database statistics

clear fabric database statistics [ type { network | profile | cabling | partition | bl-dci } [ server-proto ldap { ipv6 <ipv6addr> | ip <ipaddr> | host <hostname> } [ port <portnum> ] [ vrf { <vrf-name> | <vrf-known-name> } ] ] ]

Syntax Description

clear

Reset functions

fabric

Fabric

database

Clear Fabric Database

statistics

Clear database statistics

type

(Optional) Enter database type

network

(Optional) Network Database

profile

(Optional) Port or Switch Profile Database

cabling

(Optional) Cable Management Database

partition

(Optional) Partition Database

bl-dci

(Optional) Border Leaf - DCI

server-proto

(Optional) Enter database protocol

ldap

(Optional) Use LDAP

ipv6

(Optional) IPv6 address of server

ip

(Optional) IP address of server

ipaddr

(Optional) Enter IP address of server

host

(Optional) Hostname of server

hostname

(Optional) Enter hostname of server

port

(Optional) Port

portnum

(Optional) Enter port number

vrf

(Optional) vrf context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

  • /exec

clear fabric database statistics type server-proto radius group

clear fabric database statistics type { network | profile | cabling | partition | bl-dci } server-proto radius group <groupname>

Syntax Description