Cisco Nexus 9000 Series NX-OS Command Reference (Configuration Commands), Release 9.3(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book

Results

Updated:
January 23, 2023

Chapter: M Commands

M Commands

m2rib debug ftag

m2rib debug ftag { add | del | mod } <ftag-id> <topo-id> { [ UCAST ] [ MCAST ] [ ACTIVE ] [ INACTIVE ] } + [ <proto> ] [ vampire-tap ]

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

ftag

Configure M2RIB's ftag db

add

Add an ftag

mod

Modify an ftag flags

del

Delete an ftag

ftag-id

ftag id

topo-id

topo id

proto

(Optional) Protocol owner id

UCAST

(Optional) Broadcast ftag

MCAST

(Optional) Multicast ftag

ACTIVE

(Optional) Active ftag

INACTIVE

(Optional) Inactive ftag

vampire-tap

(Optional) Send a copy of all M2RIB generated messages to CLI

Command Mode

  • /exec

m2rib debug gr-route add nh

m2rib debug gr-route { add | del } <vlan> { { <v4-source> <v4-group> } | { <v6-source> <v6-group> } } { nh-if <if-name> | nh-sw <switch-id> } { [ WC_SRC ] [ WC_GRP ] [ NH_EXCLUDE ] [ FLOOD_TO_VLAN ] [ LOCAL ] [ REMOTE ] [ IGNORE_STAR ] } + [ proto <proto> ] [ route-type <route-type> ] [ vampire-tap ]

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

gr-route

Perform group route operations on m2rib

add

Add a route next-hop

del

Delete a route next-hop

proto

(Optional) Protocol owning this next-hop

route-type

(Optional) Route type of this next-hop

nh-if

next-hop interface

nh-sw

next-hop switch

vlan

vlan key

v4-source

IPv4 Multicast traffic source

v4-group

IPv4 Multicast Group address

if-name

Specify the next hop interface

switch-id

Specify the next hop switch id

WC_SRC

(Optional) Source is wildcarded

WC_GRP

(Optional) Group is wildcarded

NH_EXCLUDE

(Optional) Next-hop excluded from ltl+1

FLOOD_TO_VLAN

(Optional) Broadcast (flood-to-vlan) special group

LOCAL

(Optional) Local members exist

REMOTE

(Optional) Remote members exist

IGNORE_STAR

(Optional) Do not combine with router-port oif list

proto

(Optional) Protocol owner id

route-type

(Optional) Route type

vampire-tap

(Optional) Send a copy of all M2RIB generated messages to CLI

Command Mode

  • /exec

m2rib debug log-size event-history

m2rib debug log-size event-history { <size> | small | medium | large }

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

log-size

Set log sizes

event-history

Set event-history size

size

Buffer size in KB

small

Set to default small log size

medium

Set to default medium log size

large

Set to default large log size

Command Mode

  • /exec/configure

m2rib debug log-size transactions

m2rib debug log-size transactions { { received | u2rib | mfdm | pixm | eltm } [ error-log ] | announced } { <size> | small | medium | large } <size_bytes>

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

log-size

Set log sizes

transactions

Set transaction log sizes

received

Set received transaction log size

announced

Set announced transaction log size

u2rib

Set U2RIB transaction log size

mfdm

Set MFDM transaction log size

pixm

Set PIXM transaction log size

eltm

Set ELTM transaction log size

error-log

(Optional) errors only log

size

Size in number of transactions

small

Set number of transactions default small log size (0 disables limits)

medium

Set numbser of transactions default medium log size

large

Set number of transactions default large log size

size_bytes

Max log size in number of bytes

Command Mode

  • /exec/configure

m2rib debug omf enable

m2rib debug omf { enable | disable } <from-vlan> <to-vlan> [ vampire-tap ]

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

omf

Enable or disable Optimized Multicast Flood (OMF)

enable

Enable OMF

disable

Disable OMF

from-vlan

from vlan

to-vlan

to vlan

vampire-tap

(Optional) Send a copy of all M2RIB generated messages to CLI

Command Mode

  • /exec

m2rib debug pkt-recv enable

m2rib debug pkt-recv { enable | disable } <from-vlan> <to-vlan> <proto> [ vampire-tap ]

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

pkt-recv

Enable or disable protocol packet reception

enable

Enable packet receive

disable

Disable packet receive

from-vlan

from vlan

to-vlan

to vlan

proto

Protocol id

vampire-tap

(Optional) Send a copy of all M2RIB generated messages to CLI

Command Mode

  • /exec

m2rib debug swroute nh

m2rib debug swroute { add | mod | del } <ftag> <switch-id> nh <if-name> [ proto <proto> ] [ route-type <route-type> ] [ vampire-tap ]

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

swroute

Perform route operations on m2rib

add

Add a route next-hop

mod

Modify a route's next-hop

del

Delete a route next-hop

nh

next-hop

proto

(Optional) Protocol owning this next-hop

route-type

(Optional) Route type of this next-hop

ftag

ftag key

switch-id

switch id

if-name

Specify the next hop interface

proto

(Optional) Protocol owner id

route-type

(Optional) Route type

vampire-tap

(Optional) Send a copy of all M2RIB generated messages to CLI

Command Mode

  • /exec

m2rib debug topo

m2rib debug topo { create | del | add-vlans | del-vlans } <topo-id> <from-vlan> <to-vlan> [ <proto> ] [ vampire-tap ]

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

topo

Configure M2RIB's topo db

create

Create a topo in m2rib

del

Delete a topo in m2rib

add-vlans

Add vlans to an existing topo

del-vlans

Delete vlans from an existing topo

topo-id

topo id

from-vlan

from vlan

to-vlan

to vlan

proto

(Optional) Protocol owner id

vampire-tap

(Optional) Send a copy of all M2RIB generated messages to CLI

Command Mode

  • /exec

m2rib debug topo loop-flush-timeout

m2rib debug topo [ <topo-id> ] loop-flush-timeout <timeout>

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

topo

configure M2RIB's topology db

topo-id

(Optional) topo id

loop-flush-timeout

configure the loop flush timer value

timeout

Loop flush timeout value in ms

Command Mode

  • /exec/configure

mac-addr

{ mac-addr <dstmac> <smac> [ dot1q <dot1q-id> ] }

Syntax Description

mac-addr

Mac

dstmac

Destination mac address

smac

Source mac address

dot1q

(Optional) Encapsulation dot1q/bd

dot1q-id

(Optional) Encapsulation dot1q/bd on which the mac is learnt

Command Mode

  • /exec/configure/configngoamccpayload

mac-address

mac-address <macaddress> | no mac-address [ <macaddress> ]

Syntax Description

no

Negate a command or set its defaults

mac-address

Virtual MAC address

macaddress

MAC address(FORMAT:xxxx.xxxx.xxxx)

Command Mode

  • /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

mac-address

mac-address <mac-addr> | no mac-address

Syntax Description

no

Negate a command or set its defaults

mac-address

Manually set interface MAC address

mac-addr

MAC address

Command Mode

  • /exec/configure/if-vlan-common

mac-address

mac-address <mac_address_val> | no mac-address [ <mac_address_val> ]

Syntax Description

no

Negate a command or set its defaults

mac-address

Configure interface mac address (1)

mac_address_val

Static Router MAC address (1)

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-ether-sub /exec/configure/if-eth-non-member /exec/configure/if-remote-ethernet-sub /exec/configure/if-port-channel /exec/configure/if-port-channel-sub /exec/configure/if-ether-sub-p2p /exec/configure/if-ethernet-p2p

mac-address bpdu source version 2

[no] mac-address bpdu source version 2

Syntax Description

no

(Optional) Negate a command or set its defaults

mac-address

change vpc mac address

bpdu

bpdu

source

source

version

version

2

use version 2 bpdu source mac-address

Command Mode

  • /exec/configure/vpc-domain

mac-address destination

{ mac-address { destination | source } <addr> } | { no mac-address { destination | source } }

Syntax Description

no

Negate a command or set its defaults

mac-address

specify flow mac address

source

specify flow source mac address

destination

specify flow destination mac address

addr

mac address

Command Mode

  • /exec/configure/configngoamprofileflow

mac-address ipv6-extract

mac-address ipv6-extract | no mac-address ipv6-extract

Syntax Description

no

Negate a command or set its defaults

mac-address

Configure interface mac address (3)

ipv6-extract

Extract mac-address (3) from the IPv6 address configured on the interface

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-ether-sub /exec/configure/if-eth-non-member /exec/configure/if-remote-ethernet-sub /exec/configure/if-port-channel-sub /exec/configure/if-port-channel

mac-learn disable

mac-learn disable | no mac-learn disable

Syntax Description

no

Negate a command or set its defaults

mac-learn

Mac Learning disable/enable on vlan

disable

Mac Learning disable on vlan

Command Mode

  • /exec/configure/vlan-config

mac-learn disable

mac-learn disable | no mac-learn disable

Syntax Description

no

Negate a command or set its defaults

mac-learn

Mac Learning disable/enable

disable

Mac Learning disable to use switch as a HUB. Do a clear mac address-table dynamic after disabling mac learning

Command Mode

  • /exec/configure

mac-list permit

{ mac-list <maclist-name> [ seq <seq> ] { permit | deny } <mac-addr> [ <mac-mask> ] } | { no mac-list { <maclist-name> | <maclist-name> } [ seq <seq> ] [ { permit | deny } <mac-addr> [ <mac-mask> ] ] }

Syntax Description

no

Negate a command or set its defaults

mac-list

Build a mac list

maclist-name

Name of mac-list

maclist-name

Name of mac-list

maclist-name

Known mac-list name

seq

(Optional) Sequence number of an entry

seq

(Optional) Sequence number

permit

Specify routes to forward

deny

Specify routes to reject

mac-addr

MAC address

mac-mask

(Optional) MAC Mask. Default Mask is ffff.ffff.ffff

Command Mode

  • /exec/configure

mac access-list

[no] mac access-list <name> [ client <clienttype> <clientID> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

mac

MAC configuration commands

access-list

Configure access list

name

List name

client

(Optional) set client type

clienttype

(Optional) CLI/ONEP

clientID

(Optional) client appID

Command Mode

  • /exec/configure

mac address-table aging-time

mac address-table aging-time { 0 | <seconds> } [ { vlan <vlan-id> } ] [ __readonly__ <info_str> ] | no mac address-table aging-time [ [ 0 | <seconds> ] ]

Syntax Description

no

Negate a command or set its defaults

mac

MAC configuration commands

address-table

MAC Address Table

aging-time

Aging time

0

0 disables aging

seconds

Aging time in seconds.

vlan

(Optional) VLAN

vlan-id

(Optional) VLAN ID

__readonly__

(Optional)

info_str

(Optional) Information

Command Mode

  • /exec/configure

mac address-table guard-vpc-peergw-mac

[no] mac address-table guard-vpc-peergw-mac

Syntax Description

no

(Optional) Negate a command or set its defaults

mac

MAC configuration commands

address-table

MAC Address Table

guard-vpc-peergw-mac

Prevent vPC Peer gateway MAC Spoofing

Command Mode

  • /exec/configure

mac address-table limit

mac address-table limit { system | vlan <id> | interface <interface-name> } { <limitcount> } [ actiondrop ] [ __readonly__ <info_str> ] | no mac address-table limit { system | vlan <id> | interface <interface-name> } [ <limitcount> ] [ actiondrop ]

Syntax Description

no

Negate a command or set its defaults

mac

MAC configuration commands

address-table

MAC Address Table

limit

Restrict number of Mac addresses learnt

system

System-wide

vlan

VLAN

id

List of VLAN ids

interface

Interface

interface-name

Interface name

limitcount

Mac address limit count

actiondrop

(Optional) Drop packets instead of flooding

__readonly__

(Optional)

info_str

(Optional) Information

Command Mode

  • /exec/configure

mac address-table limit user-defined

mac address-table limit <value> user-defined | no mac address-table limit [ <value> ] user-defined

Syntax Description

no

Negate a command or set its defaults

mac

MAC configuration commands

address-table

MAC Address Table

limit

mac limit

value

user-defined mac limit

user-defined

limit the number of unique mac addresses used on any type of L3 interface

Command Mode

  • /exec/configure

mac address-table loop-detect port-down

mac address-table loop-detect port-down | no mac address-table loop-detect port-down

Syntax Description

no

Negate a command or set its defaults

mac

MAC configuration commands

address-table

MAC Address Table

loop-detect

Action for Mac loop detection

port-down

Take port-down action for mac loop detection

Command Mode

  • /exec/configure

mac address-table multicast vlan interface

[no] mac address-table multicast <mac-address> { vlan <vlan> | bridge-domain <bdid> } interface [ vsi ] <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

mac

MAC configuration commands

address-table

MAC Address Table

multicast

mcast mac OIF Static Entry

mac-address

mcast MAC Address, not in Unicast IP Range

vlan

VLAN

vlan

VLAN

bridge-domain

BD

bdid

BD

interface

Interface

vsi

(Optional) Specify if this interface is a VSI

interface

Interface name

Command Mode

  • /exec/configure

mac address-table notification mac-move

mac address-table notification mac-move | no mac address-table notification mac-move

Syntax Description

no

Negate a command

mac

MAC configuration commands

address-table

MAC Address Table

notification

Notify of mac-move

mac-move

MAC move notification on syslog

Command Mode

  • /exec/configure

mac address-table notification threshold

mac address-table notification threshold [ limit <percentage> interval <seconds> ] | no mac address-table notification threshold

Syntax Description

no

Negate a command

mac

MAC configuration commands

address-table

MAC Address Table

notification

Notify of mac-move

threshold

MAC Address Table threshold notification

limit

(Optional) Specify the percentage limit beyond which notifications are enabled

percentage

(Optional) Percentage of MAC Table Consumption

interval

(Optional) Minimum time in seconds between two notifications

seconds

(Optional) Interval time in seconds

Command Mode

  • /exec/configure

mac address-table static vlan interface

mac address-table static <mac-address> vlan <vlan-id> { interface <interface-name> | drop } [ auto-learn ] [ __readonly__ <info_str> ] | no mac address-table static <mac-address> vlan <vlan-id>

Syntax Description

no

Negate a command or set its defaults

mac

MAC configuration commands

address-table

MAC Address Table

static

Static Entry

mac-address

MAC Address

vlan

VLAN

vlan-id

VLAN ID

interface

Interface

interface-name

Interface name

drop

Drop all traffic

auto-learn

(Optional) Allow moving this MAC address

__readonly__

(Optional)

info_str

(Optional) Information

Command Mode

  • /exec/configure

mac address-table static vni

mac address-table static <mac-address> vni <vni-id>

Syntax Description

mac

MAC configuration commands

address-table

MAC Address Table

static

Static Entry

mac-address

MAC Address

vni

Virtual Network Identifier

vni-id

VNI ID

Command Mode

  • /exec/configure

mac address

[no] mac address { <macaddr> }

Syntax Description

no

(Optional) Negate a command or set its defaults

mac

Configure vMAC address options for Pathway

address

Pathway will use a specified vMAC address

macaddr

48-bit MAC address in HEX

Command Mode

  • /exec/configure/if-eth-any/vrrs

mac address inherit

mac address inherit

Syntax Description

mac

Configure vMAC address options for Pathway

address

Pathway will use a specified vMAC address

inherit

Pathway will inherit vMAC

Command Mode

  • /exec/configure/if-eth-any/vrrs

mac advert interval

[no] mac advert interval | mac advert interval <macint>

Syntax Description

no

Negate a command or set its defaults

mac

Configure vMAC address options for Pathway

advert

Specify vMAC unsolicited advertisements

interval

Specify interval between vMAC unsolicited advertisements

macint

Advertisement Interval in seconds

Command Mode

  • /exec/configure/if-eth-any/vrrs

mac packet-classify

[no] mac packet-classify

Syntax Description

no

(Optional) Negate a command or set its defaults

mac

MAC

packet-classify

Force mac classification of packets

Command Mode

  • /exec/configure/vlan

mac packet-classify

[no] mac packet-classify

Syntax Description

no

(Optional) Negate a command or set its defaults

mac

MAC configuration commands

packet-classify

Force mac classification of packets

Command Mode

  • /exec/configure/if-ethernet-switch /exec/configure/if-remote-ethernet-switch /exec/configure/if-eth-port-channel-switch /exec/configure/if-ethernet-all

mac port access-group

[no] mac port access-group <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

mac

MAC configuration commands

port

Port policy

access-group

Specify access control for packets

name

List name

Command Mode

  • /exec/configure/if-set-acl-l2

macsec keychain macsec keychain

[no] macsec keychain <keychain_name> [ policy <policy_name> ] [ fallback-keychain <fallback_kc_name> ] | [ no ] macsec keychain <keychain_name> [ fallback-keychain <fallback_kc_name> ] [ policy <policy_name> ]

Syntax Description

macsec

Specify MKA keychain and MACsec policy

keychain

key chain

keychain_name

name of the keychain specified as a string

policy

(Optional) policy

policy_name

(Optional) name of the policy specified as a string

fallback-keychain

(Optional) fallback keychain

fallback_kc_name

(Optional) Name of fallback keychain specified as a string

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-ethernet-p2p /exec/configure/if-eth-base

macsec policy

[no] macsec policy <policy_name>

Syntax Description

macsec

Configure MACSEC

policy

Configure MACSEC policy

policy_name

Name of Policy

Command Mode

  • /exec/configure

macsec shutdown

[no] macsec shutdown

Syntax Description

macsec

Configure MACSEC

shutdown

shutdown / restart macsec

Command Mode

  • /exec/configure

managed-config-flag

[no] managed-config-flag <state>

Syntax Description

no

(Optional) Negate a command or set its defaults

state

Command Mode

  • /exec/configure/config-ra-guard

management

[no] management

Syntax Description

no

(Optional) Negate a command or set its defaults

management

Allow in-band management access to VLAN Interface IP address

Command Mode

  • /exec/configure/if-vlan-common

map-notify-group

{ [ no ] map-notify-group { <addr> | <addr6> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

map-notify-group

Group address to send and receive site specific Map-Notify messages

addr

IPv4 group address

Command Mode

  • /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

map-server key

{ { [ no ] map-server { <ms> | <ms6> } [ key-type { sha1 | sha2 } ] key <key> } | { [ no ] map-server { <ms> | <ms6> } proxy-reply } }

Syntax Description

no

(Optional) Negate a command or set its defaults

map-server

To interact with Map-Server

ms

Address of IPv4 map-server

key-type

(Optional) Authentication key type, either sha1 or sha2

sha1

(Optional) Use sha1 authenication in Map-Register messages

sha2

(Optional) Use sha2 authenication in Map-Register messages

key

Authentication key used with Map-Server

key

SHA-1 password key

proxy-reply

Request Map-Server to send Map-Replies on behalf of dynamic-EID

Command Mode

  • /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

marker-packet-n3500

[no] marker-packet-n3500 [ <interval> | seconds <interval1> | milliseconds <interval2> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

marker-packet-n3500

Enable/Disable send marker packet

interval

(Optional) range between <1-4> second

seconds

(Optional) Configure interval in secs

interval1

(Optional) range between <1-4> second

milliseconds

(Optional) Interval in milli second.

interval2

(Optional) range between <100-900> msecs, increments in mutliples of 100

Command Mode

  • /exec/configure/config-monitor-erspan-src

marker-packet

[no] marker-packet [ <interval> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

marker-packet

Enable/Disable send marker packet

interval

(Optional)

Command Mode

  • /exec/configure/config-monitor-erspan-src

master ipv4

[no] master ipv4 <ip>

Syntax Description

no

(Optional) Negate a command or set its defaults

master

master

ipv4

ipv4

ip

IPv4 address (A.B.C.D) of slave

Command Mode

  • /exec/configure/ptp-ucast-slave

match-address

[no] match-address

Syntax Description

no

(Optional) Negate a command or set its defaults

match-address

Match addresses in advertisement packets

Command Mode

  • /exec/configure/if-eth-any/vrrpv3

match

[no] match { { access-group name <acl-name> } | [ not ] { dscp { <dscp-list> | { <dscp-enum> } + } | { { packet length <len-list> | ip rtp <port-list> } [ replace ] } | { cos <cos-list> } | { qos-group <qos-group-list> } | { precedence { <precedence-list> | { <prec-enum> } + } } | { protocol <protocol-enum> } | { mpls experimental topmost <exp-list> } | { ip roce <port-list> } } }

Syntax Description

dscp-list

<dscp-enum>

cos-list

precedence-list

<prec-enum>

no

(Optional) Negate a command or set its defaults

replace

(Optional) Replace current ip rtp / packet length configuration

match

Classification criteria

not

(Optional) Negate this match result

access-group

Access group

name

Named Access List

acl-name

Access List name

dscp

DSCP in IP(v4) and IPv6 packets

dscp-enum

cos

IEEE 802.1Q Class of Service

qos-group

Qos-group

qos-group-list

List of qos-group values

precedence

Precedence in IP(v4) and IPv6 packets

prec-enum

protocol

Protocol

protocol-enum

packet

Packet

length

Length of IP datagram

len-list

List of IP packet length

ip

IP

rtp

Real Time Protocol

port-list

UDP port list that are using RTP

mpls

Match on MPLS label

experimental

Match on MPLS Experimental label

topmost

Match on topmost MPLS label

ip

IP

roce

Roce protocol. port to be used 3804

port-list

UDP port list that are using RoCE

exp-list

List of MPLS exp values

Command Mode

  • /exec/configure/class-map

match

[no] match { [ not ] { { discard-class <discard-class-list> } | { class-map <cmap-name> } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

not

(Optional) Negate this match result

discard-class

Discard class

discard-class-list

List of discard-class values

class-map

Class map

cmap-name

Match class-map name

Command Mode

  • /exec/configure/class-map

match

[no] match { { access-group name <acl-name> } | [ not ] { { cos <cos-value> } | any | { eth-src <mac_src> <mac_src_wild> } | { eth-dest <mac_dest> <mac_dest_wild> } | { eth-type <eth-value> } | { vlan <vlan-number> } | { ip-tos <tos-value> <tos-mask> } | { ip-protocol <ip-protocol-value> } | { ip-src-addr <ip-s-addr> <ip-s-mask> } | { ip-dst-addr <ip-d-addr> <ip-d-mask> } | { tcp-src-port <tcp-src-port-addr> } | { tcp-dst-port <tcp-dest-port-addr> } | { udp-src-port <udp-src-port-addr> } | { udp-dst-port <udp-dest-port-addr> } | { input-interface <ifnum> } | { ipv6-src-addr <ipv6-s-addr> <ipv6-s-mask> } | { ipv6-dst-addr <ipv6-d-addr> <ipv6-d-mask> } | { ipv6-protocol <ipv6-protocol-value> } | { ipv6-flowlabel <ipv6-flowlabel-value> } | { icmpv6-type <icmpv6-type-value> } | { icmpv6-code <icmpv6-code-value> } | { ipv4-dscp <ipv4-dscp-list> } | { ipv6-dscp <ipv6-dscp-list> } | { dscp { <dscp-list> | <dscp-enum> } + } | { precedence { <precedence-list> | <prec-enum> } + } | { discard-class <discard-class-list> } | { qos-group <qos-group-list> } | { class-map <cmap-name-plc> } | { protocol <protocol-enum> } | { packet length <len-list> } | { ip rtp <port-list> } | { mpls experimental topmost <exp-list> } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

not

(Optional) Negate this match result

access-group

Access group

name

Named Access List

acl-name

Access List name

cos

IEEE 802.1Q class of service

dscp

DSCP in IP(v4) and IPv6 packets

dscp-list

List of DSCP values

dscp-enum

precedence

Precedence in IP(v4) and IPv6 packets

precedence-list

List of precedence values

prec-enum

discard-class

Discard class

discard-class-list

List of discard-class values

qos-group

Qos-group

qos-group-list

List of qos-group values

class-map

Class map

cmap-name-plc

Match class-map name

protocol

Protocol

protocol-enum

packet

Packet

length

Length of IP datagram

len-list

list of IP packet length

ip

IP

rtp

Real Time Protocol

port-list

UDP port list that are using RTP

mpls

Match on MPLS label

experimental

Match on MPLS Experimental label

topmost

Match on topmost MPLS label

exp-list

List of MPLS exp values

any

Match on Any Filter

eth-dest

Match on Layer 2 destination MAC address

eth-src

Match on Layer 2 source MAC address

eth-type

Match on Ether type

vlan

Match on 802.1Q vlan

ip-tos

Match on IPv4 TOS

ip-protocol

Match on IP protocol

ip-src-addr

Match on IPv4 source address

ip-dst-addr

Match on IPv4 destination address

ipv6-src-addr

Match on IPv6 source address

ipv6-dst-addr

Match on IPv6 destination address

tcp-src-port

Match on TCP source port

tcp-dst-port

Match on TCP source port

udp-src-port

Match on UDP source port

udp-dst-port

Match on UDP source port

input-interface

Match on physical input interface

ipv6-protocol

Match on IPv6 Protocol Value

ipv6-flowlabel

Match on IPv6 Flowlabel

icmpv6-type

Match on ICMPv6 Message Type

icmpv6-code

Match on ICMPv6 Message Code

ipv4-dscp

Match on DSCP for IPV4 Packets

ipv6-dscp

Match on DSCP for IPV6 Packets

cos-value

class of service Value

mac_src

Source MAC address

mac_src_wild

Source MAC mask

mac_dest

Destination MAC address

mac_dest_wild

Destination MAC mask

eth-value

Ethernet type

vlan-number

Vlan number

tos-value

IPv4 TOS

tos-mask

IPV4 TOS Mask for DSCP

ip-protocol-value

IPV4 protocol

ip-s-addr

IPV4 address in format a.b.c.d

ip-d-addr

IPV4 address in format a.b.c.d

ip-s-mask

IPV4 address Mask in format a.b.c.d

ip-d-mask

IPV4 address Mask in format a.b.c.d

tcp-src-port-addr

Transport layer port number

tcp-dest-port-addr

Transport layer port number

udp-src-port-addr

Transport layer port number

udp-dest-port-addr

Transport layer port number

ifnum

Physical interface Name and Number

ipv6-protocol-value

IPv6 Protocol Value

ipv6-flowlabel-value

IPv6 Flowlabel

icmpv6-type-value

ICMPv6 Message Type

icmpv6-code-value

ICMPv6 Message Code

ipv4-dscp-list

List of IPV4 DSCP values

ipv6-dscp-list

List of IPV6 DSCP values

Command Mode

  • /exec/configure/class-map/type/plc

match access-group name

[no] match access-group name <acs-grp-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

access-group

Match with given access group

name

Name of the access group

acs-grp-name

Match parameter for class-map

Command Mode

  • /exec/configure/cmap

match address

[no] match <ip_ipv6_mac> address <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Specify the match clause

ip_ipv6_mac

IP/IPv6/MAC

address

Match an access list

name

List name

Command Mode

  • /exec/configure/vacl

match as-number

[no] match as-number [ { <asnum> | <asnum_range> } + ] { <asnum_trail> | <asnum_range_trail> }

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

as-number

Match BGP peer AS number

asnum

(Optional) <AA4>,

asnum_range

(Optional) <AA4>-<AA4>,

asnum_trail

<AA4>,

asnum_range_trail

<AA4>-<AA4>,

Command Mode

  • /exec/configure/route-map

match as-number as-path-list

match as-number as-path-list <aspl-name> + | no match as-number as-path-list { <aspl-name> | <aspl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

as-number

Match BGP peer AS number

as-path-list

AS-path access-list

aspl-name

AS path access list name

aspl-name

AS path access list name

aspl-name

Known as-path access-list name

Command Mode

  • /exec/configure/route-map

match as-path

match as-path <aspl-name> + | no match as-path { <aspl-name> | <aspl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

as-path

Match BGP AS path list

aspl-name

AS path access list name

aspl-name

AS path access list name

aspl-name

Known as-path access-list name

Command Mode

  • /exec/configure/route-map

match class-map

[no] match class-map <cmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

class-map

Class map

cmap-name

class map name

Command Mode

  • /exec/configure/class-map/type/queuing

match community

[no] match community <name> + [ exact-match ]

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

community

Match BGP community list

name

Community list name

exact-match

(Optional) Do exact matching of communities

Command Mode

  • /exec/configure/route-map

match cos

[no] match cos <cos-list>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

cos

IEEE 802.1Q class of service

cos-list

List of class-of-service values

Command Mode

  • /exec/configure/class-map/type/uf

match cos

[no] match cos <cos-list>

Syntax Description

cos-list

no

(Optional) Negate a command or set its defaults

match

Classification criteria

cos

IEEE 802.1Q Class of Service

Command Mode

  • /exec/configure/class-map/type/queuing

match datalink

[no] match datalink { mac source-address | mac destination-address | ethertype }

Syntax Description

match

Specify a key field

datalink

datalink (Layer 2) attributes

mac

MAC Address

source-address

Source MAC Address

destination-address

Destination MAC Address

ethertype

Ethertype

Command Mode

  • /exec/configure/config-fte-record

match datalink

[no] match datalink { mac source-address | mac destination-address | ethertype | vlan }

Syntax Description

match

Specify a key field

datalink

datalink (Layer 2) attributes

mac

MAC Address

source-address

Source MAC Address

destination-address

Destination MAC Address

ethertype

Ethertype

vlan

VLAN ID

Command Mode

  • /exec/configure/nfm-record

match datalink

[no] match datalink { mac source-address | mac destination-address | ethertype | vlan }

Syntax Description

match

Specify a key field

datalink

datalink (Layer 2) attributes

mac

MAC Address

source-address

Source MAC Address

destination-address

Destination MAC Address

ethertype

Ethertype

vlan

VLAN ID

Command Mode

  • /exec/configure/nfm-record

match dscp

[no] match dscp { <dscp-list> } +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

dscp

DSCP in IP(v4) packets

dscp-list

List of DSCP values

Command Mode

  • /exec/configure/class-map/type/queuing

match dscp

[no] match dscp { <dscp-list> | <dscp-enum> } +

Syntax Description

dscp-list

<dscp-enum>

no

(Optional) Negate a command or set its defaults

match

Classification criteria

dscp

DSCP in IP(v4) and IPv6 packets

dscp-enum

Command Mode

  • /exec/configure/color-cmap

match evpn route-type

[no] match evpn route-type { 1 | 2 | 2-mac-only | 2-mac-ip | 3 | 4 | 5 | 6 } +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

evpn

Match BGP EVPN Routes

route-type

Match route type for evpn route

1

1

Command Mode

  • /exec/configure/route-map

match exception

[no] match exception { { { ip | ipv6 } { option | { icmp { redirect | unreachable } } | municast } } | ttl-failure | glean | mtu-failure | nat-flow | sflow | { multicast { rpf-failure | sg-rpf-failure | dest-miss | ipv6-rpf-failure | ipv6-sg-rpf-failure | ipv6-dest-miss } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

exception

Match exception packets

ip

ipv4 match criteria

ipv6

ipv6 match criteria

option

Match ip/ipv6 option exception packets

icmp

Icmp redirect packets

redirect

Send redirected packets back to sender

unreachable

Send unreachable packets back to sender

municast

IP unicast packets with multicast MAC

ttl-failure

Failed in ttl

mtu-failure

mtu-failure

glean

Glean packets

multicast

multicast packets

rpf-failure

multicast rpf check failure

sg-rpf-failure

multicast sg rpf check failure

dest-miss

L3 multicast destination lookup failure

ipv6-rpf-failure

IPv6 multicast rpf check failure

ipv6-sg-rpf-failure

IPv6 multicast sg rpf check failure

ipv6-dest-miss

IPv6 L3 multicast destination lookup failure

nat-flow

ipv4 software nat flow packets

sflow

sflow packets

Command Mode

  • /exec/configure/cmap

match extcommunity

[no] match extcommunity <name> + [ exact-match ]

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

extcommunity

Match BGP community list

name

Extended Community list name

exact-match

(Optional) Do exact matching of extended communities

Command Mode

  • /exec/configure/route-map

match interface

[no] match interface <name> +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

interface

Match first hop interface of route

name

Interface name

Command Mode

  • /exec/configure/route-map

match ip address

[no] match ip address <name> +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

ip

Configure IP features

address

Match address of route or match packet

name

IP access-list name (for use in route-maps for PBR only)

Command Mode

  • /exec/configure/route-map

match ip address prefix-list

match ip address prefix-list <ipv4-pfl-name> + | no match ip address prefix-list { <ipv4-pfl-name> | <ipv4-pfl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ip

Configure IP features

address

Match address of route or match packet

prefix-list

Match entries of prefix-lists

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Known prefix-list name

Command Mode

  • /exec/configure/route-map

match ip multicast rp

{ match ip multicast { { rp <iprp> [ rp-type <iprptype> ] } | { group <gprefix> } | { source <ipsrc> } } + } | { match ip multicast { { rp <iprp> [ rp-type <iprptype> ] } | { group-range <gaddr_start> to <gaddr_end> } | { source <ipsrc> } } + } | { no match ip multicast }

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ip

Configure IP features

multicast

Match multicast attributes

rp

Rendezvous point

iprp

IPv4 rendezvous prefix

rp-type

(Optional) Multicast rendezvous point type

iprptype

(Optional) IPv4 rendezvous point type

group

Multicast Group prefix

gprefix

IPv4 group prefix

group-range

Multicast Group address range

gaddr_start

First Group address

to

Range

gaddr_end

Last Group address

source

Multicast source address

ipsrc

IPv4 source prefix

Command Mode

  • /exec/configure/route-map

match ip next-hop prefix-list

match ip next-hop prefix-list <ipv4-pfl-name> + | no match ip next-hop prefix-list { <ipv4-pfl-name> | <ipv4-pfl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ip

Configure IP features

next-hop

Match next-hop address of route

prefix-list

Match entries of prefix-lists

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Known prefix-list name

Command Mode

  • /exec/configure/route-map

match ip protocol

[no] match ip { protocol | tos }

Syntax Description

match

Specify a key field

ip

IP attributes

protocol

Protocol

tos

TOS

Command Mode

  • /exec/configure/nfm-record

match ip protocol

[no] match ip { protocol | tos }

Syntax Description

match

Specify a key field

ip

IP attributes

protocol

Protocol

tos

TOS

Command Mode

  • /exec/configure/nfm-record

match ip route-source prefix-list

match ip route-source prefix-list <ipv4-pfl-name> + | no match ip route-source prefix-list { <ipv4-pfl-name> | <ipv4-pfl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ip

Configure IP features

route-source

Match advertising source address of route

prefix-list

Match entries of prefix-lists

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Known prefix-list name

Command Mode

  • /exec/configure/route-map

match ip source address

[no] match ip { source | destination } address

Syntax Description

match

Specify a key field

ip

IP attributes

source

Source Address

destination

Destination Address

address

Address

Command Mode

  • /exec/configure/nfm-record

match ipv4 protocol

[no] match ipv4 { protocol | tos }

Syntax Description

match

Specify a key field

ipv4

IPv4 attributes

protocol

Protocol

tos

TOS

Command Mode

  • /exec/configure/config-fte-record

match ipv4 source address

[no] match ipv4 { source | destination } address

Syntax Description

match

Specify a key field

ipv4

IPv4 attributes

source

Source Address

destination

Destination Address

address

Address

Command Mode

  • /exec/configure/config-fte-record

match ipv4 source address

[no] match ipv4 { source | destination } address

Syntax Description

match

Specify a key field

ipv4

IPv4 attributes

source

Source Address

destination

Destination Address

address

Address

Command Mode

  • /exec/configure/nfm-record

match ipv4 transport destination

[no] match ipv4 transport { destination-port | source-port }

Syntax Description

match

Specify a key field

ipv4

IPv4 attributes

transport

Transport layer fields

destination-port

Transport destination port

source-port

Transport source port

Command Mode

  • /exec/configure/config-fte-record

match ipv6

[no] match ipv6 { { { source | destination } address } | { flow-label } }

Syntax Description

match

Specify a key field

ipv6

IPv6 attributes

source

Source Address

destination

Destination Address

address

Address

flow-label

Flow label

Command Mode

  • /exec/configure/config-fte-record

match ipv6

[no] match ipv6 { { { source | destination } address } | { flow-label | options } }

Syntax Description

match

Specify a key field

ipv6

IPv6 attributes

source

Source Address

destination

Destination Address

address

Address

flow-label

Flow label

options

Options

Command Mode

  • /exec/configure/nfm-record

match ipv6 address

[no] match ipv6 address <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

ipv6

Configure IPv6 features

address

Match address of route or match packet

name

IPv6 access-list name (for use in route-maps for PBR only)

Command Mode

  • /exec/configure/route-map

match ipv6 address prefix-list

match ipv6 address prefix-list <ipv6-pfl-name> + | no match ipv6 address prefix-list { <ipv6-pfl-name> | <ipv6-pfl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ipv6

Configure IPv6 features

address

Match address of route or match packet

prefix-list

Match entries of prefix-lists

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Known prefix-list name

Command Mode

  • /exec/configure/route-map

match ipv6 multicast rp

{ match ipv6 multicast { { rp <ipv6rp> [ rp-type <ipv6rptype> ] } | { group <gprefix> } | { source <ipv6src> } } + } | { match ipv6 multicast { { rp <ipv6rp> [ rp-type <ipv6rptype> ] } | { group-range <gaddr_start> to <gaddr_end> } | { source <ipv6src> } } + } | { no match ipv6 multicast }

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ipv6

Configure IPv6 features

multicast

Match multicast attributes

rp

Rendezvous point

rp-type

(Optional) Multicast rendezvous point type

ipv6rptype

(Optional) IPv6 rendezvous point type

group

Multicast group address

group-range

Multicast Group address range

to

Range

source

Multicast source address

Command Mode

  • /exec/configure/route-map

match ipv6 next-hop prefix-list

match ipv6 next-hop prefix-list <ipv6-pfl-name> + | no match ipv6 next-hop prefix-list { <ipv6-pfl-name> | <ipv6-pfl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ipv6

Configure IPv6 features

next-hop

Match next-hop address of route

prefix-list

Match entries of prefix-lists

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Known prefix-list name

Command Mode

  • /exec/configure/route-map

match ipv6 protocol

[no] match ipv6 { protocol | tos }

Syntax Description

match

Specify a key field

ipv6

IPv6 attributes

protocol

Protocol

tos

TOS

Command Mode

  • /exec/configure/config-fte-record

match ipv6 route-source prefix-list

match ipv6 route-source prefix-list <ipv6-pfl-name> + | no match ipv6 route-source prefix-list { <ipv6-pfl-name> | <ipv6-pfl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ipv6

Configure IPv6 features

route-source

Match advertising source address of route

prefix-list

Match entries of prefix-lists

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Known prefix-list name

Command Mode

  • /exec/configure/route-map

match ipv6 transport destination

[no] match ipv6 transport { destination-port | source-port }

Syntax Description

match

Specify a key field

ipv6

IPv6 attributes

transport

Transport layer fields

destination-port

Transport destination port

source-port

Transport source port

Command Mode

  • /exec/configure/config-fte-record

match mac-list

match mac-list [ dest ] <maclist-name> + | no match mac-list [ dest ] { <maclist-name> | <maclist-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

mac-list

Match entries of mac-lists

dest

(Optional) Mac-list with destination mac addresses

maclist-name

Name of mac-list

maclist-name

Name of mac-list

maclist-name

Known mac-list name

Command Mode

  • /exec/configure/route-map

match metric

[no] match metric { <measure> [ <plus-minus> <deviation> ] } +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

metric

Match metric of route

plus-minus

(Optional) +-

measure

Metric value

deviation

(Optional) Deviation value

Command Mode

  • /exec/configure/route-map

match ospf-area

[no] match ospf-area <area> +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

ospf-area

Match ospf area

area

area id

Command Mode

  • /exec/configure/route-map

match protocol

[no] match protocol { fcoe | iscsi | tcp }

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

protocol

Protocol

fcoe

FCoE

iscsi

ISCSI

tcp

TCP

Command Mode

  • /exec/configure/class-map/type/uf

match protocol arp

[no] match protocol { arp | mpls [ router-alert | exp <exp_value> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

protocol

Protocol

arp

IP ARP

mpls

Multi-protocol Label Switching

router-alert

(Optional) Match packets with router-alert label set to 1 for OTV Overlay frames

exp

(Optional) Match packets on MPLS exp bits

exp_value

(Optional) Exp bits value

Command Mode

  • /exec/configure/cmap

match qos-group

[no] match qos-group { <qos-group-list> } +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

qos-group

QoS Group

qos-group-list

List of qos-group values

Command Mode

  • /exec/configure/class-map/type/queuing

match qos-group2

[no] match qos-group2 { <qos-group-list> }

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

qos-group2

QoS Group

qos-group-list

Command Mode

  • /exec/configure/class-map/type/queuing

match qos-group2

[no] match qos-group2 <qos-group-list>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

qos-group2

QoS Group

qos-group-list

Command Mode

  • /exec/configure/class-map/type/uf

match qos-group

[no] match qos-group <qos-group-list>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

qos-group

QoS Group

qos-group-list

List of qos-group values

Command Mode

  • /exec/configure/class-map/type/uf

match redirect

[no] match redirect <opt_match_redirect>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

redirect

Match redirected packets

opt_match_redirect

Match criteria for redirected packets

Command Mode

  • /exec/configure/cmap

match route-type

[no] match route-type { external | internal | level-1 | level-2 | local | nssa-external | type-1 | type-2 | inter-area | intra-area } +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

route-type

Match route-type of route

external

external route (BGP, EIGRP and OSPF type 1/2)

internal

internal route (including OSPF intra/inter area)

level-1

IS-IS level-1 route

level-2

IS-IS level-2 route

local

locally generated route

nssa-external

nssa-external route (OSPF type 1/2)

type-1

OSPF external type 1 route

type-2

OSPF external type 2 route

inter-area

OSPF inter area route

intra-area

OSPF intra area route

Command Mode

  • /exec/configure/route-map

match source-protocol

[no] match source-protocol <src_prot> +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

source-protocol

Match source protocol

src_prot

Protocol instance name

Command Mode

  • /exec/configure/route-map

match tag

[no] match tag <tagid> +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

tag

Match tag of route

tagid

Tag value

Command Mode

  • /exec/configure/route-map

match transport destination

[no] match transport { destination-port | source-port }

Syntax Description

match

Specify a key field

transport

Transport layer fields

destination-port

Transport destination port

source-port

Transport source port

Command Mode

  • /exec/configure/nfm-record

match transport destination

[no] match transport { destination-port | source-port }

Syntax Description

match

Specify a key field

transport

Transport layer fields

destination-port

Transport destination port

source-port

Transport source port

Command Mode

  • /exec/configure/nfm-record

max-backoff

max-backoff <maxbackoff-val> | no max-backoff

Syntax Description

no

Negate a command or set its defaults

max-backoff

OpenFlow controller maximum backoff timer (default is 8 seconds)

maxbackoff-val

max backoff timer value in secs

Command Mode

  • /exec/configure/openflow/switch/sub-switch

max-backoff

max-backoff <maxbackoff-val> | no max-backoff

Syntax Description

no

Negate a command or set its defaults

max-backoff

OpenFlow controller maximum backoff timer (default is 8 seconds)

maxbackoff-val

max backoff timer value in secs

Command Mode

  • /exec/configure/openflow/switch

max-lsa

[no] max-lsa <maximum-number> [ <threshold> ] [ warning-only | [ ignore-time <ignore-time-minutes> ] [ ignore-count <ignore-count-number> ] [ reset-time <reset-time-minutes> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

max-lsa

Feature to limit the number of non-self-originated LSAs

maximum-number

Set maximum number of non self-generated LSAs

threshold

(Optional) Threshold value (%) at which to generate a warning message

warning-only

(Optional) Log a warning message when limit is exceeded

ignore-time

(Optional) Set time during which all adjacencies are suppressed

ignore-time-minutes

(Optional) ignore-time in minutes

ignore-count

(Optional) Set count on how many times adjacencies can be suppressed

ignore-count-number

(Optional) ignore-count

reset-time

(Optional) Set number of minutes after which ignore-count is reset to zero

reset-time-minutes

(Optional) reset-time in minutes

Command Mode

  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

max-lsa

[no] max-lsa <maximum-number> [ <threshold> ] [ warning-only | [ ignore-time <ignore-time-minutes> ] [ ignore-count <ignore-count-number> ] [ reset-time <reset-time-minutes> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

max-lsa

Feature to limit the number of non-self-originated LSAs

maximum-number

Set maximum number of non self-generated LSAs

threshold

(Optional) Threshold value (%) at which to generate a warning message

warning-only

(Optional) Log a warning message when limit is exceeded

ignore-time

(Optional) Set time during which all adjacencies are suppressed

ignore-time-minutes

(Optional) ignore-time in minutes

ignore-count

(Optional) Set count on how many times adjacencies can be suppressed

ignore-count-number

(Optional) ignore-count

reset-time

(Optional) Set number of minutes after which ignore-count is reset to zero

reset-time-minutes

(Optional) reset-time in minutes

Command Mode

  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

max-lsp-lifetime

max-lsp-lifetime <lifetime> | no max-lsp-lifetime [ <lifetime> ]

Syntax Description

no

Negate a command or set its defaults

max-lsp-lifetime

Set maximum LSP lifetime

lifetime

Maximum LSP lifetime in seconds

Command Mode

  • /exec/configure/l2mp-isis/l2mp-isis-vrf-common

max-lsp-lifetime

max-lsp-lifetime <lifetime> | no max-lsp-lifetime [ <lifetime> ]

Syntax Description

no

Negate a command or set its defaults

max-lsp-lifetime

Set maximum LSP lifetime

lifetime

Maximum LSP lifetime in seconds

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

max-lsp-lifetime

max-lsp-lifetime <lifetime> | no max-lsp-lifetime [ <lifetime> ]

Syntax Description

no

Negate a command or set its defaults

max-lsp-lifetime

Set maximum LSP lifetime

lifetime

Maximum LSP lifetime in seconds

Command Mode

  • /exec/configure/otv-isis/otv-isis-vrf-common

max-metric router-lsa

[no] max-metric router-lsa [ external-lsa [ <max-metric-extlsa> ] ] [ include-stub ] [ on-startup [ <timeout> ] [ wait-for bgp <as> ] ] [ summary-lsa [ <max-metric-sumlsa> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

max-metric

Maximize the cost metric

router-lsa

Router LSA

external-lsa

(Optional) External LSAs

max-metric-extlsa

(Optional) Max metric value for external LSAs

include-stub

(Optional) Advertise Max metric for Stub links as well

on-startup

(Optional) Effective only at startup

timeout

(Optional) Wait period in seconds after startup

wait-for

(Optional) Wait for an event to advertise normal metric

bgp

(Optional) BGP Convergence

as

(Optional) ASN of BGP to wait for

summary-lsa

(Optional) Summary LSAs

max-metric-sumlsa

(Optional) Max metric value for summary LSAs

Command Mode

  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

max-metric router-lsa

[no] max-metric router-lsa [ external-lsa [ <max-metric-extlsa> ] ] [ stub-prefix-lsa ] [ on-startup [ <timeout> ] [ wait-for bgp <as> ] ] [ inter-area-prefix-lsa [ <max-metric-sumlsa> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

max-metric

Maximize the cost metric

router-lsa

Router LSA

external-lsa

(Optional) External LSAs

max-metric-extlsa

(Optional) Max metric value for external LSAs

stub-prefix-lsa

(Optional) Advertise Max metric for Stub links as well

on-startup

(Optional) Effective only at startup

timeout

(Optional) Wait period in seconds after startup

wait-for

(Optional) Wait for an event to advertise normal metric

bgp

(Optional) BGP Convergence

as

(Optional) ASN of BGP to wait for

inter-area-prefix-lsa

(Optional) Inter-area-prefix LSAs

max-metric-sumlsa

(Optional) Max metric value for summary LSAs

Command Mode

  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

max-ports

[no] [ vmware ] max-ports

Syntax Description

no

Negate a command or set its defaults

vmware

(Optional) VMware configuration

max-ports

Max ports on which this profile can be inherited

Command Mode

  • /exec/configure/port-profile

max-ports

[ vmware ] max-ports <i0>

Syntax Description

vmware

(Optional) VMware configuration

max-ports

Max ports on which this profile can be inherited

i0

Enter the max-number of ports

Command Mode

  • /exec/configure/port-profile

maxas-limit

maxas-limit <as-limit> | no maxas-limit [ <as-limit> ]

Syntax Description

no

Negate a command or set its defaults

maxas-limit

Allow AS-PATH attribute from EBGP neighbor imposing a limit on number of ASes

as-limit

Number of ASes in the AS-PATH attribute

Command Mode

  • /exec/configure/router-bgp/vrf-cmds

maximum-paths

{ { maximum-paths <num-paths> } | { no maximum-paths [ <num-paths> ] } }

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Forward packets over multiple paths

num-paths

Number of paths

Command Mode

  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

maximum-paths

maximum-paths <max-paths> | no maximum-paths [ <max-paths> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

RIP set maximum paths per route

max-paths

Maximum paths per prefix

Command Mode

  • /exec/configure/router-rip/router-rip-af-common /exec/configure/router-rip/router-rip-vrf-af-common

maximum-paths

maximum-paths <max-paths> | no maximum-paths [ <max-paths> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Set maximum paths per destination

max-paths

Maximum paths per destination

Command Mode

  • /exec/configure/router-isis/router-isis-af-ipv4

maximum-paths

maximum-paths <max-paths> | no maximum-paths [ <max-paths> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Set maximum paths per destination

max-paths

Maximum paths per destination

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

maximum-paths

maximum-paths <max-paths> | no maximum-paths [ <max-paths> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Maximum paths per destination

max-paths

Maximum paths per destination

Command Mode

  • /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

maximum-paths

maximum-paths <max-paths> | no maximum-paths [ <max-paths> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Maximum paths per destination

max-paths

Maximum paths per destination

Command Mode

  • /exec/configure/router-ospf

maximum-paths

maximum-paths [ ibgp ] <mpath-count> | no maximum-paths [ ibgp ] [ <mpath-count> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Forward packets over multipath paths

ibgp

(Optional) Configure multipath for IBGP paths

mpath-count

Number of parallel paths

Command Mode

  • /exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn

maximum-paths

maximum-paths <max-paths> | no maximum-paths [ <max-paths> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Set maximum paths per destination

max-paths

Maximum paths per destination

Command Mode

  • /exec/configure/l2mp-isis/l2mp-isis-vrf-common /exec/configure/l2mp-isis/l2mp-isis-l2-topo

maximum-paths eibgp

maximum-paths eibgp <mpath-count> | no maximum-paths eibgp [ <mpath-count> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Forward packets over multipath paths

eibgp

Configure multipath for both EBGP and IBGP paths

mpath-count

Number of parallel paths

Command Mode

  • /exec/configure/router-bgp/router-bgp-vrf-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6 /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6

maximum-paths mixed

maximum-paths mixed <mpath-count> | no maximum-paths mixed [ <mpath-count> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Forward packets over multipath paths

mixed

Configure multipath for local and remote paths

mpath-count

Number of parallel paths

Command Mode

  • /exec/configure/router-bgp/router-bgp-vrf-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6 /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

maximum-peers

{ maximum-peers <limit> | no maximum-peers [ <limit> ] }

Syntax Description

no

Negate a command or set its defaults

maximum-peers

Maximum number of peers for this prefix

limit

Max. peers limit

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor-prefix

maximum-prefix

maximum-prefix <limit> [ <percent> ] [ restart <restart-time> | warning-only ] | { no | default } maximum-prefix [ <limit> [ <percent> ] [ restart <restart-time> | warning-only ] ]

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

maximum-prefix

Maximum number of prefixes from this neighbor

limit

Max. prefix limit

percent