Registering a Cisco VSG
You can register a Cisco VSG with the Cisco PNSC. Registration enables communication between the Cisco VSG and the Cisco PNSC.
Procedure
Step 1 |
Copy the nsc-vsgpa.2.1.3i.bin file into the Cisco VSG bootflash:
|
Step 2 |
On the command line, enter configuration mode.
|
Step 3 |
Enter the config-nsc-policy-agent mode.
|
Step 4 |
Set the Cisco PNSC registration IP address.
|
Step 5 |
Specify the shared-secret of Cisco PNSC.
|
Step 6 |
Install the policy agent.
|
Step 7 |
Exit all modes.
|
Step 8 |
On the Cisco VSG command line, enter the show nsc-pa status command:
|
Step 9 |
Save the change persistently through reboots and restarts by copying the running configuration to the startup configuration:
|