Cisco Edge 340 Series Software Configuration Guide, Release 1.2
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- October 26, 2014
Chapter: SNMP Information
SNMP Information
Cisco Edge 340 Series supports Simple Network Management Protocol (SNMP), so that you can monitor hundreds of Cisco Edge 340 Series devices in the same time.
This appendix provides information about the SNMP information with Cisco Edge 340 Series in the following sections:
Compatibility
Cisco Edge 340 Series supports only SNMP v3. The SNMPv3 authentication is performed by using a users authKey to sign the message being sent. The authProtocol must be SHA, and the private key must be AES. Both authKeys and privKeys are generated from a passphrase that must be at least 8 characters in length.
Supported MIB Information
Table B-1 Table B-1 provides the MIB information that the Cisco Edge 340 Series supports using SNMP:
Feedback