|
WARNING
|
Emergency
call from<CALLING ADDRESS>has been routed to default ERL because calling
party modification failed.
Please make sure that the check box "Enable Calling Party Number Modification" is checked on the Call Manager user page for
the CER user. PSAP callbacks MAY NOT work correctly. The CER service will need to be restarted once the flag is checked on
the Call Manager User page.
|
|
WARNING
|
Emergency
call from<calling address>could not be routed using the following
Routepatterns.
<LIST
OF RP's>
Call
Routed to <RP/NUMBER>
Please check the availability of the above routes.
Also,
check for the following error conditions.
-
If FAC
and/or CMC are configured on the route patterns used for CER, please disable
them.
-
If the
"Calling Party Number Modification" flag on the CER user page in the call
manager is not enabled, please enable it.
|
|
ERROR
|
Failed to
load class <CLASS NAME>.
|
|
ERROR
|
CCMString
is empty can't load telephony classes.
|
|
WARNING
|
Got
OutOfService event from provider: <PROVIDER_NAME>.
|
|
INFO
|
Got
InService event from provider: <PROVIDER_NAME>.
|
|
WARNING
|
Logged out
of the duplicate provider - <CTI_Manager> from CER. Specify the CTI Ports
(if any) of this provider, in a different CCM node.
|
|
WARNING
|
Cannot
register media terminal for port: <PORT_NUMBER>.
|
|
WARNING
|
CTI Port:
<PORT_NUMBER> is in OUTOFSERVICE, trying after 10 seconds.
|
|
ERROR
|
Media channel creation failed: <ERROR>.
|
|
WARNING
|
Failed to
create media channel for: <PORT_NUMBER>.
|
|
ERROR
|
Failed to
initiate call to security: <NUMBER> <ERROR>.
<ERROR> corresponds to:
-
PrivilegeViolationException
-
InvalidPartyException
-
MethodNotSupportedException
-
InvalidArgumentException
-
InvalidStateException
-
E911CallRouterException
-
<Other Exceptions (if any)>
|
|
ERROR
|
Failed to
register route point: <ROUTE_PATTERN> with Provider:
<PROVIDER_NAME>.
|
|
ERROR
|
RouteAddress: <ADDRESS> is in OUTOFSERVICE.
|
|
WARNING
|
<ADDRESS> Route Point received IN_SERVICE event from
Provider <NAME>.
|
|
WARNING
|
<ADDRESS> Route Point received OUT_OF_SERVICE event from
Provider <NAME>.
|
|
ERROR
|
<msg>Address = <CALLING ADDRESS> ; Terminal =
<CALLING TERMINAL> because, routeEndEvent returned :<CAUSE>
<msg> corresponds to
Call
failed to reach PSAP for : /PSAP Callback failed for :
<CAUSE> corresponds to
CAUSE_
INVALID_DESTINATION/CAUSE_ROUTING_TIMER_EXPIRED/CAUSE_ PARAMETER_NOT_
SUPPORTED/CAUSE_STATE_INCOMPATIBLE/CAUSE_UNSPECIFIED_ ERROR
|
|
ERROR
|
<msg>Address = <CALLING ADDRESS> ; Terminal =
<CALLING TERMINAL> because, routeEndEvent returned :
CAUSE_CTIERR_FAC_CMC_REASON_CMC_NEEDED. Please Uncheck the Requirement of
FAC/CMC codes on the Route points used by the Cisco Emergency Responder.
|
|
WARNING
|
Call from <CALLER ID> could not be routed to the Offpremise ERL : <ERL NAME>.
Possible
reasons: The phone-location association has not yet happened or has met with
errors.
Device
Name: <DEVICE NAME>
Caller ID:
<CALLER ID>
|
|
WARNING
|
Failed to
get the JTAPI Provider for: <NAME_STRING> trying infinitely.
|
|
WARNING
|
Not
registering the provider: <PROVIDER_NAME> as is already registered/in the
same CCM Cluster as that of:<element>.
|
|
WARNING
|
JTAPI logs
are not enabled as the logs path is empty in E911Bootstrap properties.
|
|
ERROR
|
Failed to
get the JTAPI Provider for: <IP Address/Host Name> after <NUMBER>
attempts.
|
|
WARNING
|
Currently,
no CTI Ports are available to place the call for <CallingAddress>. Phone
notification will be retried in the next 60 seconds.
|
Feedback