Cisco Emergency Responder Version 15 Release Notes

First Published: December 18, 2023

Last Updated: March 5, 2024

Introduction

Cisco Emergency Responder Release 15 supports the following new features:

Migration of All Applications to 64-Bit System

Release 15 brings an enhanced experience for users and administrators with major platform upgrades to align with the industry standards. Enhancements include Application-layer changes and core Linux transition for long-term support. This enhancements also includes transition to 64-bit application architecture for removal of memory bottlenecks and mitigating end-of-life for 32-bit dependencies. This release provides enhanced protection, security, innovation, and flexibility.

Some of the important considerations when installing or migrating to Release 15 are:

Emergency Responder 15 requires a minimum ESXi version of 7.0 U3 or 8.0 U1 (see https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-cisco-emergency-responder.html) with a minimum VM Hardware version 17. The other required VM specifications like guest OS type may be found in the Readme of the base OVA on software.cisco.com.
Updated vRAM considerations for Release 15 of Emergency Responder. See Cisco Emergency Responder 15x Supported Upgrades for more information.
Direct Refresh Upgrades from Pre-12.5.x source to Release 15 is not supported. You must first upgrade your source to Release 12.5.x or 14 and SUs and then upgrade your source to Release 15.
Virtual Floppy Drive is replaced with virtual CDROM for touchless installation.
IPSec policy with 3DES Algorithm is not supported in FIPS mode for Release 15 in case you are planning to upgrade to Release 15. You must delete and recreate the IPSec policy with the Encryption and ESP Algorithms other than 3DES in both the nodes between which the IPSec tunnel is to be established, and then plan an upgrade.

Enhanced Security Considerations

From Cisco Emergency Responder Release 14 onwards, all the certificate-related operations are moved from IPsec to Tomcat certificates. To create a trust between a publisher node and subscriber node, the Tomcat certificate should be exchanged between the publisher and subscriber for any cluster-related operations to work. From Release 14SU2 onwards, if you need to perform manual or scheduled DRS backups or if you must change the subscriber hostname, the tomcat-ecdsa certificate must be exchanged between the publisher and subscriber nodes along with the tomcat certificate.

Any Federal Information Processing Standards (FIPS) or hostname related changes require the same operation procedures.

Switch Support

Support switch port based tracking for new Voice LAN Switches: Cisco Catalyst 2960L Series, Cisco 1100 Integrated Services Routers, and Cisco 890 Integrated Services Routers. For more information, see the Supported Voice Ready Lan Switches section.

Requirements

Supported Hardware and Software

The information in the following sections discuss Hardware and Software requirements for Cisco Emergency Responder 15. Read these sections before you perform an upgrade.

Required Software

The following table lists required software that you must install to use Emergency Responder.

Table 1. Required Software
Item	Supported Software Release	Description
Cisco Unified Communications Manager	Cisco Unified Communications Manager 15 Cisco Unified Communications Manager 14 and SUs Cisco Unified Communications Manager 12.5(x) Cisco Unified Communications Manager 11.5(x)	The software that runs the telephony network.
Web browser	Microsoft Edge, Chrome, and Firefox on Windows 10 and 11 (64 bit) Safari, Chrome, and Firefox on MacOS Ventura 13.4.1	We recommend that you use the latest version for all the web browsers supported.

Recommended Software

The following table lists optional software that is recommended for use with Emergency Responder.

Table 2. Recommended Software
Item	Minimum software release	Description
Email server	Any SMTP email server	Used to send email notifications to onsite alert (security) personnel. If you use an SMTP email paging server, personnel are paged instead of emailed.

Supported Phones

The following table lists the different types of phones that support Emergency Responder. The support that Emergency Responder supplies differs depending on the type of phone and the type of switch port to which the phone is attached.

Table 3. Supported Phones

Phones

Description

Phones that are automatically tracked using Switch-port based tracking

Most Cisco IP Phones and Telepresence/Webex devices support Cisco Discovery Protocol (CDP). This includes the Skinny Call Control Protocol (SCCP) and Session Initiation Protocol (SIP) IP Phones.

Check the data sheets for each Cisco phone model/series to confirm CDP support.

Devices that do not support CDP can potentially be tracked using the MAC table on the switch, to do this you must toggle “Enable CAM-based Phone Tracking” when you add the network switch to Emergency Responder.

These phones do not require any special Emergency Responder configuration. However, you must enable Cisco Discovery Protocol on the switches.

Note

Although Cisco Analog Telephone Adapter (ATA) phones support Cisco Discovery Protocol and SCCP, Emergency Responder cannot automatically track them. You can add ATA phones manually and assign them to an Emergency Response Location (ERL). Emergency Responder routes calls from ATA phones based on the assigned ERL.

Note

Cisco IP Communicator can be tracked using Cisco Discovery Protocol only when it is installed with the Device ID containing the MAC address of the wired network interface and operating over a wired network interface.

Phones that you can track using an IP subnet

Any Cisco Unified IP Phone, Telepresence/Webex device, or third-party SIP phone can be tracked using IP subnet based tracking.

Cisco Jabber can be tracked using IP subnet-based tracking.

To track these phones, you must configure the subnet and then assign ERLs to the configured subnets.

Note

Any IP endpoint can be tracked at call time using the IP subnet provided that the Use IP Address from Call Signaling Telephony setting is enabled.

Phones that you can manually define or track using an IP subnet

Phones that are connected to analog line gateways such as Cisco VG350 or VG224 series or ATA 180 series or ATA 190 series or ATA 191 series.
Any H.323 endpoints
Cisco Webex App (registered natively to Unified Communications Manager)

These phones are supported only if their calls are routed by Cisco Unified Communications Manager.

Note

Any IP endpoint can be tracked at call time using the IP subnet provided that the Use IP Address From Call Signaling Telephony setting is enabled.

Cisco Webex client (registered natively to Unified Communications Manager) is represented through the registered Spark RD (Remote Destination) and needs to be manually defined in Emergency Responder for tracking.

Phones supported for off-premises location confirmation and update with the Remote Worker Emergency Calling feature in Unified Communications Manager 9.0 and later

Cisco IP Communicator
Cisco Virtual Desktop (VXCC)
Cisco IP Phone 7800 Series
Cisco Unified IP Phone 9971, 9951, 8961,8945, 8941, 8865, 8861, 8851, 8845, 8841, 7975, 7971, 7970, 7965, 7962, 7961, 7945, 7942, 7941, 7911, 7910, and 7906

When configured for off-premises use in Unified Communications Manager 9.0 and later, these phones provide displays for off-premises users to confirm or update their off-premises location.

Note

If the user dismisses the display before confirming or updating the location, the location can be recovered by selecting Running Applications from the Services menu or by resetting the phone.

Phones supported for Access Point based tracking with Unified Communications Manager 11.5 and later

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, 7926G, 8821, Cisco Jabber, and Cisco Webex App

Wireless Access Points need to be defined in Unified Communications Manager 11.5 and later, these phones provide their upstream infrastructure information (like BSSID) through Station Info messages to Unified Communications Manager. Cisco Emergency Responder through AXL Change Notification can track these phones through the associated Access Point.

Supported Voice Ready Lan Switches

The following table lists the LAN switch models that Emergency Responder supports. A LAN switch model is supported only if the SNMP System Object ID appears in this table, regardless of the LAN switch configuration or software release.

Note

Emergency Responder requires SNMP Version 1, Version 2, Version 2c, or Version 3 for automatic tracking of Cisco Unified IP Phones by connected switch ports.

Table 4. Supported Voice-Ready LAN Switches
Series (Ethernet Ports Only)	Supported Device	System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB
Catalyst C1000	C1000-8FP-2G-L	1.3.6.1.4.1.9.1.2959
	C1000-8P-2G-L	1.3.6.1.4.1.9.1.2959
	C1000-8FP-E-2G-L	1.3.6.1.4.1.9.1.2959
	C1000-8P-E-2G-L	1.3.6.1.4.1.9.1.2959
	C1000-8T-2G-L	1.3.6.1.4.1.9.1.2959
	C1000-8T-E-2G-L	1.3.6.1.4.1.9.1.2959
	C1000-16FP-2G-L	1.3.6.1.4.1.9.1.2959
	C1000-16P-2G-L	1.3.6.1.4.1.9.1.2959
	C1000-16P-E-2G-L	1.3.6.1.4.1.9.1.2959
	C1000-16T-2G-L	1.3.6.1.4.1.9.1.2897
	C1000-16T-E-2G-L	1.3.6.1.4.1.9.1.2959
	C1000-24FP-4G-L	1.3.6.1.4.1.9.1.2959
	C1000-24FP-4X-L	1.3.6.1.4.1.9.1.2959
	C1000-24P-4G-L	1.3.6.1.4.1.9.1.2959
	C1000-24P-4X-L	1.3.6.1.4.1.9.1.2897
	C1000-24PP-4G-L	1.3.6.1.4.1.9.1.2959
	C1000-24T-4X-L	1.3.6.1.4.1.9.1.2897
Catalyst C1000	C1000-48FP-4G-L	1.3.6.1.4.1.9.1.2959
	C1000-48FP-4X-L	1.3.6.1.4.1.9.1.2897
	C1000-48P-4X-L	1.3.6.1.4.1.9.1.2897
	C1000-48PP-4G-L	1.3.6.1.4.1.9.1.2959
	C1000-48T-4G-L	1.3.6.1.4.1.9.1.2959
	C1000-24T-4G-L	1.3.6.1.4.1.9.1.2959
	C1000SM-16FP-2G-L	1.3.6.1.4.1.9.1.2943
	C1000SM-16P-2G-L	1.3.6.1.4.1.9.1.2941
	C1000SM-16P-E-2G-L	1.3.6.1.4.1.9.1.2942
	C1000SM-16T-2G-L	1.3.6.1.4.1.9.1.2939
	C1000SM-16T-E-2G-L	1.3.6.1.4.1.9.1.2940
	C1000SM-24FP-4G-L	1.3.6.1.4.1.9.1.2947
	C1000SM-24FP-4X-L	1.3.6.1.4.1.9.1.2954
	C1000SM-24P-4G-L	1.3.6.1.4.1.9.1.2946
	C1000SM-24P-4X-L	1.3.6.1.4.1.9.1.2953
	C1000SM-24PP-4G-L	1.3.6.1.4.1.9.1.2945
	C1000SM-24T-4G-L	1.3.6.1.4.1.9.1.2944
	C1000SM-24T-4X-L	1.3.6.1.4.1.9.1.2952
Catalyst C1000	C1000SM-48FP-4G-L	1.3.6.1.4.1.9.1.2951
	C1000SM-48FP-4X-L	1.3.6.1.4.1.9.1.2957
	C1000SM-48P-4G-L	1.3.6.1.4.1.9.1.2950
	C1000SM-48P-4X-L	1.3.6.1.4.1.9.1.2956
	C1000SM-48PP-4G-L	1.3.6.1.4.1.9.1.2949
	C1000SM-48T-4G-L	1.3.6.1.4.1.9.1.2948
	C1000SM-48T-4X-L	1.3.6.1.4.1.9.1.2955
	C1000SM-8P-2G-L	1.3.6.1.4.1.9.1.2935
	C1000SM-8P-E-2G-L	1.3.6.1.4.1.9.1.2936
	C1000-48T-4X-L	1.3.6.1.4.1.9.1.2897
	C1000SM-8T-2G-L	1.3.6.1.4.1.9.1.2933
	C1000SM-8T-E-2G-L	1.3.6.1.4.1.9.1.2934
	C1000-12MP-2X-L	1.3.6.1.4.1.9.1.2897
	C1000-24MP-4X-L	1.3.6.1.4.1.9.1.2897
Catalyst C1000	C1000SM-8FP-2G-L	1.3.6.1.4.1.9.1.2937
	C1000SM-8FP-E-2G-L	1.3.6.1.4.1.9.1.2938
	C1000FE-24T-4G-L	1.3.6.1.4.1.9.1.3021
	C1000FE-24P-4G-L	1.3.6.1.4.1.9.1.3022
	C1000FE-48T-4G-L	1.3.6.1.4.1.9.1.3023
	C1000FE-48P-4G-L	1.3.6.1.4.1.9.1.3024
Connected Grid 2500	CGS-2520-16S-8PC	1.3.6.1.4.1.9.1.1246
Catalyst 2940	2940-8TF	1.3.6.1.4.1.9.1.542
Catalyst 2940	2940-8TT	1.3.6.1.4.1.9.1.540
Catalyst 2950	2950-12	1.3.6.1.4.1.9.1.323
	2950-24	1.3.6.1.4.1.9.1.324
	2950C-24	1.3.6.1.4.1.9.1.325
	2950G-24-EI-DC	1.3.6.1.4.1.9.1.472
	2950S-24	1.3.6.1.4.1.9.1.430
	2950SX-24	1.3.6.1.4.1.9.1.480
	2950SX-48	1.3.6.1.4.1.9.1.560
Catalyst 2960	2960-24LT-L	1.3.6.1.4.1.9.1.951
	2960-24PC-L	1.3.6.1.4.1.9.1.950
	2960-24-S	1.3.6.1.4.1.9.1.929
	2960-24TC-L	1.3.6.1.4.1.9.1.694
	2960-24TC-S	1.3.6.1.4.1.9.1.928
	2960-24TT-L	1.3.6.1.4.1.9.1.716
	2960-48PST-L	1.3.6.1.4.1.9.1.1016
	2960-48TC-L	1.3.6.1.4.1.9.1.695
	2960-48TC-S	1.3.6.1.4.1.9.1.927
	2960-48TT-L	1.3.6.1.4.1.9.1.717
	2960-8TC-L	1.3.6.1.4.1.9.1.798
	2960-8TC-S	1.3.6.1.4.1.9.1.1006
	2960G-24TC-L	1.3.6.1.4.1.9.1.696
	2960G-48TC-L	1.3.6.1.4.1.9.1.697
	2960G-8TC-L	1.3.6.1.4.1.9.1.799
	2960PD-8TT-L	1.3.6.1.4.1.9.1.952
	2960-48PST-S	1.3.6.1.4.1.9.1.1148
	2960-24LC-S	1.3.6.1.4.1.9.1.1146
	2960-24PC-S	1.3.6.1.4.1.9.1.1147
Catalyst 2960-C	2960CPD-8PT-L	1.3.6.1.4.1.9.1.1315
	2960C-8PC-L	1.3.6.1.4.1.9.1.1366
	2960C-12PC-L	1.3.6.1.4.1.9.1.1367
Catalyst 2960-Plus	2960-Plus 48PST-L	1.3.6.1.4.1.9.1.1748
	2960-Plus 24PC-	1.3.6.1.4.1.9.1.1749
	2960-Plus 24LC-L	1.3.6.1.4.1.9.1.1750
	2960-Plus 48PST-S	1.3.6.1.4.1.9.1.1753
	2960-Plus 24PC-S	1.3.6.1.4.1.9.1.1754
	2960-Plus 24LC-S	1.3.6.1.4.1.9.1.1755
Catalyst 2960-S	2960S Stack	1.3.6.1.4.1.9.1.1208
	2960S-24PD-L	1.3.6.1.4.1.9.1.1261
	2960S-24PS-L	1.3.6.1.4.1.9.1.1265
	2960S-48FPD-L	1.3.6.1.4.1.9.1.1258
	2960S-48FPS-L	1.3.6.1.4.1.9.1.1263
	2960S-48LPD-L	1.3.6.1.4.1.9.1.1259
	2960S-48LPS-L	1.3.6.1.4.1.9.1.1264
Catalyst 2960L	C2960L24TQLL	1.3.6.1.4.1.9.1.2495
	C2960L48TQLL	1.3.6.1.4.1.9.1.2496
	C2960L24PQLL	1.3.6.1.4.1.9.1.2497
	C2960L48PQLL	1.3.6.1.4.1.9.1.2498
	C2960L8PSLL	1.3.6.1.4.1.9.1.2361
Catalyst 2960X	Catalyst 2960X-48LPD-L	1.3.6.1.4.1.9.1.1691
	Catalyst 2960X-48TD-L	1.3.6.1.4.1.9.1.1692
	Catalyst 2960X-24TD-L	1.3.6.1.4.1.9.1.1694
	Catalyst 2960X-48FPS-L	1.3.6.1.4.1.9.1.1695
	Catalyst 2960X-48LPS-L	1.3.6.1.4.1.9.1.1696
	Catalyst 2960X-48TS-L	1.3.6.1.4.1.9.1.1698
	Catalyst 2960X-24TS-L	1.3.6.1.4.1.9.1.1699
	Catalyst 2960X-24PSK-L	1.3.6.1.4.1.9.1.1700
	Catalyst 2960X-48LPS-S	1.3.6.1.4.1.9.1.1701
	Catalyst 2960X-24PS-S	1.3.6.1.4.1.9.1.1702
	Catalyst 2960X-48TS-LL	1.3.6.1.4.1.9.1.1703
	Catalyst 2960X-24TS-LL	1.3.6.1.4.1.9.1.1704
	Catalyst 2960X-24PS-L	1.3.6.1.4.1.9.1.1697
	Catalyst 2960X-24PD-L	1.3.6.1.4.1.9.1.1693
	Catalyst 2960X-48FPD-L	1.3.6.1.4.1.9.1.1690
Catalyst 2960XR	Catalyst 2960XR-24PD-I	1.3.6.1.4.1.9.1.1800
	Catalyst 2960XR-24TD-I	1.3.6.1.4.1.9.1.1801
	Catalyst 2960XR-48FPS-I	1.3.6.1.4.1.9.1.1802
	Catalyst 2960XR-48LPS-I	1.3.6.1.4.1.9.1.1803
	Catalyst 2960XR-48TS-I	1.3.6.1.4.1.9.1.1804
	Catalyst 2960XR-24PS-I	1.3.6.1.4.1.9.1.1805
	Catalyst 2960XR-24TS-I	1.3.6.1.4.1.9.1.1806
	Catalyst 2960XR-48FPD-L	1.3.6.1.4.1.9.1.1807
	Catalyst 2960XR-48LPD-L	1.3.6.1.4.1.9.1.1808
	Catalyst 2960XR-48PD-L	1.3.6.1.4.1.9.1.1809
	Catalyst 2960XR-24PD-L	1.3.6.1.4.1.9.1.1810
	Catalyst 2960XR-24TD-L	1.3.6.1.4.1.9.1.1811
	Catalyst 2960XR-48FPS-L	1.3.6.1.4.1.9.1.1812
	Catalyst 2960XR-48LPS-L	1.3.6.1.4.1.9.1.1813
	Catalyst 2960XR-48TS-L	1.3.6.1.4.1.9.1.1814
	Catalyst 2960XR-24PS-L	1.3.6.1.4.1.9.1.1815
	Catalyst 2960XR-24TS-L	1.3.6.1.4.1.9.1.1816
	Catalyst 2960XR-48FPD-I	1.3.6.1.4.1.9.1.1797
	Catalyst 2960XR-48LPD-I	1.3.6.1.4.1.9.1.1798
	Catalyst 2960XR-48TD-I	1.3.6.1.4.1.9.1.1799
Catalyst 2975	2975GS-48PS-L	1.3.6.1.4.1.9.1.1067
Catalyst 2975	2975GS-48PS-L-Stack	1.3.6.1.4.1.9.1.1068
Catalyst 3550	3550-24-DC	1.3.6.1.4.1.9.1.452
Catalyst 3560	3560-12PC-S	1.3.6.1.4.1.9.1.1015
	3560-24PS	1.3.6.1.4.1.9.1.563
	3560-24TS	1.3.6.1.4.1.9.1.633
	3560-48PS	1.3.6.1.4.1.9.1.564
	3560-48TS	1.3.6.1.4.1.9.1.634
	3560-8PC	1.3.6.1.4.1.9.1.797
	3560G-24PS	1.3.6.1.4.1.9.1.614
	3560G-24TS	1.3.6.1.4.1.9.1.615
	3560G-48PS	1.3.6.1.4.1.9.1.616
	3560G-48TS	1.3.6.1.4.1.9.1.617
	3560V2-24PS	1.3.6.1.4.1.9.1.1021
	3560V2-48PS	1.3.6.1.4.1.9.1.1025
	3560CX-12TC-S	1.3.6.1.4.1.9.1. 2133
	3560CX-8XPD-S	1.3.6.1.4.1.9.1.2131
	3560CX-8PT-S	1.3.6.1.4.1.9.1.2130
Catalyst 3560-C	3560CG-8PC-S	1.3.6.1.4.1.9.1.1317
	3560CPD-8PT-S	1.3.6.1.4.1.9.1.1368
	3560C-8PC-S	1.3.6.1.4.1.9.1.1466
	3560C-12PC-S	1.3.6.1.4.1.9.1.1465
Catalyst 3560-E	3560E-12D	1.3.6.1.4.1.9.1.930
	3560E-12SD	1.3.6.1.4.1.9.1.956
	3560E-24PD	1.3.6.1.4.1.9.1.795
	3560E-24TD	1.3.6.1.4.1.9.1.793
	3560E-48PD	1.3.6.1.4.1.9.1.796
	3560E-48TD	1.3.6.1.4.1.9.1.794
Catalyst 3560-X	3560X-24P (-L/S/E)	1.3.6.1.4.1.9.1.1228
	3560X-48PF (-L/S/E)	1.3.6.1.4.1.9.1.1229
	3560X-48P (-L/S/E)	1.3.6.1.4.1.9.1.1229
	3560X-48U	1.3.6.1.4.1.9.1.1710
	3560X-48TS	1.3.6.1.4.1.9.1.2066
	WS-C3560X-48T-S	1.3.6.1.4.1.9.1.1227
Catalyst 3650	Catalyst C3650-24TS (-L/S/E)	1.3.6.1.4.1.9.1.1823
	Catalyst C3650-48TS (-L/S/E)	1.3.6.1.4.1.9.1. 1824
	Catalyst C3650-24PS (-L/S/E)	1.3.6.1.4.1.9.1. 1825
	Catalyst C3650-48PS (-L/S/E)	1.3.6.1.4.1.9.1. 1826
	Catalyst C3650-24TD (-L/S/E)	1.3.6.1.4.1.9.1. 1827
	Catalyst C3650-48TD (-L/S/E)	1.3.6.1.4.1.9.1. 1828
	Catalyst C3650-24PD (-L/S/E)	1.3.6.1.4.1.9.1. 1829
	Catalyst C3650-48PD (-L/S/E)	1.3.6.1.4.1.9.1.1830
	Catalyst C3650-Stack (-L/S/E)	1.3.6.1.4.1.9.1.1830
	Catalyst C3650-48PQ (-L/S/E)	1.3.6.1.4.1.9.1.1881
	Catalyst C3650-48TQ (-L/S/E)	1.3.6.1.4.1.9.1.1882
Catalyst 3750	3750 Stack	1.3.6.1.4.1.9.1.516
	3750-24FS	1.3.6.1.4.1.9.1.656
	3750-24PS	1.3.6.1.4.1.9.1.536
	3750-24TS	1.3.6.1.4.1.9.1.513
	3750-48PS	1.3.6.1.4.1.9.1.535
	3750-48TS	1.3.6.1.4.1.9.1.512
	3750G-12S	1.3.6.1.4.1.9.1.530
	3750G-12S-SD	1.3.6.1.4.1.9.1.688
	3750G-16TD	1.3.6.1.4.1.9.1.591
	3750G-24PS	1.3.6.1.4.1.9.1.602
	3750G-24T	1.3.6.1.4.1.9.1.514
	3750G-24TS	1.3.6.1.4.1.9.1.511
	3750G-24TS-1U	1.3.6.1.4.1.9.1.624
	3750G-24WS-S25	1.3.6.1.4.1.9.1.778
	3750G-24WS-S50	1.3.6.1.4.1.9.1.779
	3750G-48PS	1.3.6.1.4.1.9.1.603
	3750G-48TS	1.3.6.1.4.1.9.1.604
	3750V2-24PS	1.3.6.1.4.1.9.1.1023
	3750V2-48PS	1.3.6.1.4.1.9.1.1027
Catalyst 3750-X	3750X-48P (-L/E)	1.3.6.1.4.1.9.1.1225
	3750X-48PF (-L/S/E)	1.3.6.1.4.1.9.1.1225
	3750X-48P (-L/S)	1.3.6.1.4.1.9.1.1225
	3750X-24P (-L/S/E)	1.3.6.1.4.1.9.1.1224
Catalyst 3750 Metro	3750-24TE-M	1.3.6.1.4.1.9.1.574
Catalyst 3750-E	3750E-24PD	1.3.6.1.4.1.9.1.792
	3750E-24TD	1.3.6.1.4.1.9.1.789
	3750E-48PD	1.3.6.1.4.1.9.1.791
	3750E-48TD-S	1.3.6.1.4.1.9.1.790
Catalyst 3850	Catalyst C3850-24U (-L/S/E)	1.3.6.1.4.1.9.1.1767
	Catalyst C3850-48U (-L/S/E)	1.3.6.1.4.1.9.1.1768
	3850-48P (-L/S/E)	1.3.6.1.4.1.9.1.1641
	3850-24P (-L/S/E)	1.3.6.1.4.1.9.1.1642
	3850-48T (-L/S/E)	1.3.6.1.4.1.9.1.1643
	3850-24T (-L/S/E)	1.3.6.1.4.1.9.1.1644
	Catalyst 3850-12S-S	1.3.6.1.4.1.9.1.1880
	Catalyst 3850-12S-E	1.3.6.1.4.1.9.1.1880
	Catalyst 3850-24S-S	1.3.6.1.4.1.9.1.1879
	Catalyst 3850-24S-E	1.3.6.1.4.1.9.1.1879
	Catalyst C3850-12X48U	1.3.6.1.4.1.9.1.1745
Catalyst 4500	4503	1.3.6.1.4.1.9.5.58
	4503	1.3.6.1.4.1.9.1.503
	4506	1.3.6.1.4.1.9.5.59
	4506	1.3.6.1.4.1.9.1.502
	4507	1.3.6.1.4.1.9.1.501
	4510	1.3.6.1.4.1.9.1.537
Catalyst 4500-E	4503-E	1.3.6.1.4.1.9.1.874
	4506-E	1.3.6.1.4.1.9.1.875
	4507R-E	1.3.6.1.4.1.9.1.876
	4510R-E	1.3.6.1.4.1.9.1.877
	4507R+E	1.3.6.1.4.1.9.1.1286
	4510R+E	1.3.6.1.4.1.9.1.1287
Catalyst 4900	4948	1.3.6.1.4.1.9.1.626
Catalyst 4900	4948-10GE	1.3.6.1.4.1.9.1.659
Catalyst 6500	6503	1.3.6.1.4.1.9.5.56
	6503	1.3.6.1.4.1.9.1.449
	6504	1.3.6.1.4.1.9.1.657
	6506	1.3.6.1.4.1.9.5.45
	6506	1.3.6.1.4.1.9.1.282
	6509	1.3.6.1.4.1.9.5.44
	6509	1.3.6.1.4.1.9.1.283
	6509-NEB	1.3.6.1.4.1.9.5.61
	6513	1.3.6.1.4.1.9.5.50
	6513	1.3.6.1.4.1.9.1.400
Catalyst 6500-E	6509-E	1.3.6.1.4.1.9.1.283
	6506-E	1.3.6.1.4.1.9.1.282
	6504-E	1.3.6.1.4.1.9.1.657
	6503-E	1.3.6.1.4.1.9.1.449
Catalyst 6800ia	Catalyst 6800ia-48FPD-L	1.3.6.1.4.1.9.1.1866
Catalyst 6800ia	Catalyst 6800ia-48TD-L	1.3.6.1.4.1.9.1.1867
Catalyst 68xx	Catalyst 68xx Virtual Switch	1.3.6.1.4.1.9.1.1934
Catalyst 6880-X	Catalyst 6880-XLE	1.3.6.1.4.1.9.1.1784
Catalyst 6807-XL	Catalyst 6807-XL	1.3.6.1.4.1.9.1.1765
Catalyst 9200	C9200-24T	1.3.6.1.4.1.9.1.2694
	C9200-24P	1.3.6.1.4.1.9.1.2694
	C9200-48T	1.3.6.1.4.1.9.1.2694
	C9200-48P	1.3.6.1.4.1.9.1.2694
Catalyst 9200CX	C9200CX-8P-2X2G	1.3.6.1.4.1.9.1.3097
	C9200CX-12P-2X2G	1.3.6.1.4.1.9.1.3079
	C9200CX-12T-2X2G	1.3.6.1.4.1.9.1.3078
	C9200CX-12P-2XGH	1.3.6.1.4.1.9.1.3164
	C9200CX-8PT-2G	1.3.6.1.4.1.9.1.3098
	C9200CX-8UXG-2X	1.3.6.1.4.1.9.1.3099
	C9200CX-8P-2XGH	1.3.6.1.4.1.9.1.3195
	C9200CX-8UXG-2XH	1.3.6.1.4.1.9.1.3196
Catalyst 9200L	C9200L-24T-4G	1.3.6.1.4.1.9.1.2695
	C9200L-24P-4G	1.3.6.1.4.1.9.1.2695
	C9200L-48T-4G	1.3.6.1.4.1.9.1.2695
	C9200L-48P-4G	1.3.6.1.4.1.9.1.2695
	C9200L-24T-4X	1.3.6.1.4.1.9.1.2695
	C9200L-24P-4X	1.3.6.1.4.1.9.1.2695
	C9200L-48T-4X	1.3.6.1.4.1.9.1.2695
	C9200L-48P-4X	1.3.6.1.4.1.9.1.2695
Catalyst 9300	c9300	1.3.6.1.4.1.9.1.2494
	c930024T	1.3.6.1.4.1.9.1.2435
	c930024P	1.3.6.1.4.1.9.1.2436
	c930024U	1.3.6.1.4.1.9.1.2437
	c930024X	1.3.6.1.4.1.9.1.2438
	c930048T	1.3.6.1.4.1.9.1.2439
	c930048P	1.3.6.1.4.1.9.1.2440
	c930048U	1.3.6.1.4.1.9.1.2441
	c930048UXM	1.3.6.1.4.1.9.1.2442
Catalyst 9300L	C9300L-24T-4X	1.3.6.1.4.1.9.1.2583
	C9300L-48T-4X	1.3.6.1.4.1.9.1.2584
	C9300L-24P-4G	1.3.6.1.4.1.9.1.2585
	C9300L-48P-4G	1.3.6.1.4.1.9.1.2586
	C9300L-24T-4G	1.3.6.1.4.1.9.1.2792
	C9300L-48T-4G	1.3.6.1.4.1.9.1.2793
	C9300L-24P-4X	1.3.6.1.4.1.9.1.2798
Catalyst 9300L	C9300L-24UXG-4X	1.3.6.1.4.1.9.1.2800
	C9300L-48UXG-4X	1.3.6.1.4.1.9.1.2801
	C9300L-24UXG-2Q	1.3.6.1.4.1.9.1.2802
	C9300L-48UXG-2Q	1.3.6.1.4.1.9.1.2803
	C9300L-48P-4X	1.3.6.1.4.1.9.1.2804
	C9300L-48PF-4X	1.3.6.1.4.1.9.1.2992
	C9300L-48PF-4G	1.3.6.1.4.1.9.1.2993
	C9300LM-48UX-4Y	1.3.6.1.4.1.9.1.2804
Catalyst 9400	C9407R	1.3.6.1.4.1.9.1.2500
	C9410R	1.3.6.1.4.1.9.1.2501
	C9404R	1.3.6.1.4.1.9.1.2499
Catalyst 9500	c950012Q	1.3.6.1.4.1.9.1.2418
	c950024Q	1.3.6.1.4.1.9.1.2419
	c950040X	1.3.6.1.4.1.9.1.2420
Catalyst Express 500	500-24LC	1.3.6.1.4.1.9.1.725
	500-24PC	1.3.6.1.4.1.9.1.726
	500-24TT	1.3.6.1.4.1.9.1.724
	500G-12TC	1.3.6.1.4.1.9.1.727
Catalyst Express 520	520-24LC	1.3.6.1.4.1.9.1.933
	520-24PC	1.3.6.1.4.1.9.1.934
	520-24TT	1.3.6.1.4.1.9.1.932
	520-8PC	1.3.6.1.4.1.9.1.897
	520G-24TC	1.3.6.1.4.1.9.1.935
Cisco ME 4900	ME 4924-10GE	1.3.6.1.4.1.9.1.788
Catalyst C6880x	ciscoC6880x	1.3.6.1.4.1.9.1.1936
Catalyst 3560CX	Cisco Catalyst 3560CX-8XPD-S	1.3.6.1.4.1.9.1.2131
Catalyst 3560CX	Cisco Catalyst 3560CX-8PT-S	1.3.6.1.4.1.9.1.2130
Catalyst C3560	catwsC3560CX12pdS	1.3.6.1.4.1.9.1.2132
	catwsC3560CX12pcS	1.3.6.1.4.1.9.1.2134
	catwsC3560CX8tcS	1.3.6.1.4.1.9.1.2135
	catwsC3560CX8pcS	1.3.6.1.4.1.9.1.2136
Catalyst C2960	catwsC2960CX8tcL	1.3.6.1.4.1.9.1.2137
Catalyst 2960CX	Cisco Catalyst 2960CX-8PC-L	1.3.6.1.4.1.9.1.2191

Table 5. Supported Voice-Ready LAN Switches (Continuation)
Series (Ethernet Ports Only)	Supported Device	System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB
Catalyst IE2000	IE-2000-24T67-B	1.3.6.1.4.1.9.1.1842
	IE-2000-24T67-B	1.3.6.1.4.1.9.1.1841
	IE-2000-24T67-B	1.3.6.1.4.1.9.1.1844
	IE-2000-24T67-B	1.3.6.1.4.1.9.1.1843
	IE-2000-16T67P-G-E	1.3.6.1.4.1.9.1.1845
	IE-2000-4TS-G-L	1.3.6.1.4.1.9.1.1470
	IE-2000-4TS-G-B	1.3.6.1.4.1.9.1.1470
	IE-2000-4T-G-B	1.3.6.1.4.1.9.1.1471
	IE-2000-8TC-B	1.3.6.1.4.1.9.1.1472
	IE-2000-16TC-L	1.3.6.1.4.1.9.1.1474

Table 6. Supported Voice-Ready LAN Switches (Continuation)
Series (Ethernet Ports Only)	Supported Device	System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB
Catalyst IE2000	IE-2000-16TC-B	1.3.6.1.4.1.9.1.1474
	IE-2000-16TC-G-L	1.3.6.1.4.1.9.1.1475
	IE-2000-16TC-G-N	1.3.6.1.4.1.9.1.1715
	IE-2000-16PTC-G-E	1.3.6.1.4.1.9.1.1730
	IE-2000-4S-TS-G-B	1.3.6.1.4.1.9.1.1759
	IE-2000-4T-G-L	1.3.6.1.4.1.9.1.1471
	IE-2000-16PTC-G-L	1.3.6.1.4.1.9.1.1729
	IE-2000-8TC-G-L	1.3.6.1.4.1.9.1.1473
	IE-2000-8TC-G-B	1.3.6.1.4.1.9.1.1473
	IE-2000-16TC-G-X	1.3.6.1.4.1.9.1.1520

Table 7. Supported Voice-Ready LAN Switches (Continuation)
Series (Ethernet Ports Only)	Supported Device	System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB
Catalyst IE2000U	IE-2000U-4S-G	1.3.6.1.4.1.9.1.1839
	IE-2000U-4TS-G	1.3.6.1.4.1.9.1.1869
	IE-2000U-8TC-G	1.3.6.1.4.1.9.1.1870
	IE-2000U-16TC-GP	1.3.6.1.4.1.9.1.1868
	IE-2000U-16TC-GP	1.3.6.1.4.1.9.1.1871
	IE-2000U-16TC-GP	1.3.6.1.4.1.9.1.1872
	IE-2000U-16TC-GP	1.3.6.1.4.1.9.1.1840

Table 8. Supported Voice-Ready LAN Switches (Continuation)
Series (Ethernet Ports Only)	Supported Device	System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB
Catalyst IE3x00/IE30x0	IE-3000-4TC	1.3.6.1.4.1.9.1.958
	IE-3000-8TC	1.3.6.1.4.1.9.1.959
	IE-3010-16S-8PC	1.3.6.1.4.1.9.1.1319
	IE-3010-24TC	1.3.6.1.4.1.9.1.1320
	IE-3200-8P2S	1.3.6.1.4.1.9.1.2684
	IE-3200-8P2S-E	1.3.6.1.4.1.9.1.2684
	IE-3200-8T2S	1.3.6.1.4.1.9.1.2683
	IE-3300-8T2S	1.3.6.1.4.1.9.1.2685
	IE-3300-8P2S	1.3.6.1.4.1.9.1.2686

Table 9. Supported Voice-Ready LAN Switches (Continuation)
Series (Ethernet Ports Only)	Supported Device	System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB
Catalyst IE3400/IE3400H	IE-3400-8T2S	1.3.6.1.4.1.9.1.2872
	IE-3400-8P2S	1.3.6.1.4.1.9.1.2687
	IE-3400H-24FT	1.3.6.1.4.1.9.1.2883
	IE-3400H-16FT	1.3.6.1.4.1.9.1.2882
	IE-3400H-16T	1.3.6.1.4.1.9.1.2885
	IE-3400H-24T	1.3.6.1.4.1.9.1.2886
	IE-3400H-8FT	1.3.6.1.4.1.9.1.2881
	IE-3400H-8T	1.3.6.1.4.1.9.1.2884

Table 10. Supported Voice-Ready LAN Switches (Continuation)
Series (Ethernet Ports Only)	Supported Device	System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB
Catalyst IE4000	IE-4000-8GT8GP4G-E	1.3.6.1.4.1.9.1.2079
	IE-4000-4T4P4G-E	1.3.6.1.4.1.9.1.2072
	IE-4000-8T4G-E	1.3.6.1.4.1.9.1.2070
	IE-4000-16GT4G-E	1.3.6.1.4.1.9.1.2078
	IE-4000-16T4G-E	1.3.6.1.4.1.9.1.2073
	IE-4000-4GC4GP4G-E	1.3.6.1.4.1.9.1.2077
	IE-4000-4GS8GP4G-E	1.3.6.1.4.1.9.1.2080
	IE-4000-4S8P4G-E	1.3.6.1.4.1.9.1.2074
	IE-4000-4TC4G-E	1.3.6.1.4.1.9.1.2069
	IE-4000-8GS4G-E	1.3.6.1.4.1.9.1.2076

Table 11. Supported Voice-Ready LAN Switches (Continuation)
Series (Ethernet Ports Only)	Supported Device	System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB
Catalyst IE4000	IE-4000-8GT4G-E i+F45:F48	1.3.6.1.4.1.9.1.2075
Catalyst IE4000	IE-4000-8S4G-E	1.3.6.1.4.1.9.1.2071
Catalyst IE4010	IE-4010-4S24P	1.3.6.1.4.1.9.1.2368
Catalyst IE4010	IE-4010-16S12P	1.3.6.1.4.1.9.1.2369
Catalyst IE5000	IE-5000-16S12P	1.3.6.1.4.1.9.1.2296
Catalyst IE5000	IE-5000-12S12P-10G	1.3.6.1.4.1.9.1.2233

The following table lists the Meraki Switches and Meraki Managed Catalyst Switches that are supported for Switch Port based tracking through SNMP v2.

Table 12. Meraki Switches and Meraki Managed Catalyst Switches
Series (Ethernet Ports Only)	Supported Device	System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB
Meraki MS120	MS120-8	1.3.6.1.4.1.29671.2.338
	MS120-8LP	1.3.6.1.4.1.29671.2.339
	MS120-8FP	1.3.6.1.4.1.29671.2.340
	MS120-24	1.3.6.1.4.1.29671.2.341
	MS120-24P	1.3.6.1.4.1.29671.2.342
	MS120-48	1.3.6.1.4.1.29671.2.343
	MS120-48LP	1.3.6.1.4.1.29671.2.344
	MS120-48FP	1.3.6.1.4.1.29671.2.356
	MS120-48FP	1.3.6.1.4.1.29671.2.356
Meraki MS125	MerakiMS125-24	1.3.6.1.4.1.29671.2.371
	MerakiMS125-24P	1.3.6.1.4.1.29671.2.372
	MerakiMS125-48	1.3.6.1.4.1.29671.2.373
	MerakiMS125-48LP	1.3.6.1.4.1.29671.2.374
	MerakiMS125-48FP	1.3.6.1.4.1.29671.2.375
Meraki MS210	MS210-24P	1.3.6.1.4.1.29671.2.346
	MS210-48LP	1.3.6.1.4.1.29671.2.348
	MS210-24	1.3.6.1.4.1.29671.2.345
	MS210-48	1.3.6.1.4.1.29671.2.347
	MS210-48FP	1.3.6.1.4.1.29671.2.349
Meraki MS220	MerakiMS220-8	1.3.6.1.4.1.29671.2.304
	MerakiMS220-8p	1.3.6.1.4.1.29671.2.305
	MerakiMS220-24	1.3.6.1.4.1.29671.2.306
	MerakiMS220-24p	1.3.6.1.4.1.29671.2.307
	MerakiMS220-48	1.3.6.1.4.1.29671.2.308
	MerakiMS220-48lp	1.3.6.1.4.1.29671.2.309
	MerakiMS220-48fp	1.3.6.1.4.1.29671.2.310
Meraki MS225	MS225-24	1.3.6.1.4.1.29671.2.328
	MS225-24p	1.3.6.1.4.1.29671.2.329
	MS225-48	1.3.6.1.4.1.29671.2.330
	MS225-48lp	1.3.6.1.4.1.29671.2.331
	MS225-48fp	1.3.6.1.4.1.29671.2.332
Meraki MS250	MS250-24	1.3.6.1.4.1.29671.2.333
	MS250-24p	1.3.6.1.4.1.29671.2.334
	MS250-48	1.3.6.1.4.1.29671.2.335
	MS250-48lp	1.3.6.1.4.1.29671.2.336
	MS250-48fp	1.3.6.1.4.1.29671.2.337
Meraki MS320	MS320-24	1.3.6.1.4.1.29671.2.311
	MS320-24p	1.3.6.1.4.1.29671.2.312
	MS320-48	1.3.6.1.4.1.29671.2.313
	MS320-48lp	1.3.6.1.4.1.29671.2.314
	MS320-48fp	1.3.6.1.4.1.29671.2.315
Meraki MS350	MS350-24	1.3.6.1.4.1.29671.2.318
	MS350-24p	1.3.6.1.4.1.29671.2.319
	MS350-48	1.3.6.1.4.1.29671.2.320
	MS350-48lp	1.3.6.1.4.1.29671.2.321
	MS350-48fp	1.3.6.1.4.1.29671.2.322
	MS350-24x	1.3.6.1.4.1.29671.2.327
Meraki MS355	MS355-24X	1.3.6.1.4.1.29671.2.357
	MS355-24X2	1.3.6.1.4.1.29671.2.358
	Meraki MS355-48X	1.3.6.1.4.1.29671.2.359
	Meraki MS355-48X2	1.3.6.1.4.1.29671.2.360
Meraki MS390	Meraki MS390-24-HW	1.3.6.1.4.1.29671.2.362
	Meraki MS390-24P-HW	1.3.6.1.4.1.29671.2.363
	Meraki MS390-24U-HW	1.3.6.1.4.1.29671.2.364
	Meraki MS390-24UX-HW	1.3.6.1.4.1.29671.2.365
	Meraki MS390-48-HW	1.3.6.1.4.1.29671.2.366
	Meraki MS390-48P-HW	1.3.6.1.4.1.29671.2.367
	Meraki MS390-48U-HW	1.3.6.1.4.1.29671.2.368
	Meraki MS390-48UX-HW	1.3.6.1.4.1.29671.2.369
	Meraki MS390-48UX2-HW	1.3.6.1.4.1.29671.2.370
Meraki C9300	MerakiC9300-24T	1.3.6.1.4.1.29671.2.383

Supported Cisco Routers

The following table lists the Cisco routers Emergency Responder supports.

Table 13. Supported Cisco Routers
Series (Ethernet Ports Only)	Supported Device	System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB
Cisco 891	Cisco C891F-K9	1.3.6.1.4.1.9.1.1858
	Cisco C891FWA-K9	1.3.6.1.4.1.9.1.1859
	Cisco C891FWE-K9	1.3.6.1.4.1.9.1.1860
Cisco 1100	Cisco C1111-8P	1.3.6.1.4.1.9.1.2443
	Cisco C1111-8PWA	1.3.6.1.4.1.9.1.2448
	Cisco C1111-8PWB	1.3.6.1.4.1.9.1.2447
	Cisco C1111-8PWE	1.3.6.1.4.1.9.1.2446
Cisco 1800	Cisco 1861-SRST-B/K9	1.3.6.1.4.1.9.1.904
	Cisco 1861-SRST-C-B/K9	1.3.6.1.4.1.9.1.939
	Cisco 1861-SRST-C-F/K9	1.3.6.1.4.1.9.1.940
	Cisco 1861-SRST-F/K9	1.3.6.1.4.1.9.1.905
	Cisco 1861-UC-2BRI-K9	1.3.6.1.4.1.9.1.902
	Cisco 1861-UC-4FXO-K9	1.3.6.1.4.1.9.1.903
	Cisco1861	1.3.6.1.4.1.9.1.1065
Cisco 1900	Cisco 1905	1.3.6.1.4.1.9.1.1192
	Cisco 1921	1.3.6.1.4.1.9.1.1191
	Cisco 1941	1.3.6.1.4.1.9.1.1047
Cisco 2800	Cisco 2811	1.3.6.1.4.1.9.1.576
	Cisco 2821	1.3.6.1.4.1.9.1.577
	Cisco 2851	1.3.6.1.4.1.9.1.578
Cisco 2900	Cisco 2911	1.3.6.1.4.1.9.1.1045
	Cisco 2921	1.3.6.1.4.1.9.1.1044
	Cisco 2951	1.3.6.1.4.1.9.1.1043
Cisco 3800	Cisco 3825	1.3.6.1.4.1.9.1.543
Cisco 3800	Cisco 3845	1.3.6.1.4.1.9.1.544
Cisco 3900	Cisco 3925	1.3.6.1.4.1.9.1.1042
	Cisco 3925E	1.3.6.1.4.1.9.1.1144
	Cisco 3945	1.3.6.1.4.1.9.1.1041
	Cisco 3945E	1.3.6.1.4.1.9.1.1145

Supported Cisco UCS Platforms

For information about supported Cisco Unified Computing System (UCS) platforms, see the Unified Communications Virtualization Supported Applications section of the Cisco Collaboration Virtualization wiki.

VMware Support

For information about VMware, see the Unified Communications VMWare Requirements section of the Cisco documentation wiki at https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-software-requirements.html.

Supported OVAs and Capacity

For information about OVAs, administrators should see the Virtualization for Cisco Emergency Responder (CER) at http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-cisco-emergency-responder.html.

Important Notes

Cisco Emergency Responder 15x Supported Upgrades

Cisco Emergency Responder 10.x and later is supported on Cisco Unified Computing System (UCS) and other virtual platforms only. All existing installations on Media Convergence Servers (MCS) should be migrated to UCS before upgrading to Cisco Emergency Responder 10.x or later.

Direct Refresh Upgrades from Pre-12.5.x source to Release 15 and later is not supported. You should first upgrade your source to Release 12.5.x or 14 and SUs and then upgrade your source to Release 15 and later.

Note

Cisco Emergency Responder 15 and later does not support Install with Data Import.

Direct upgrades to Cisco Emergency Responder 15 and later are supported only for the following releases:

Cisco Emergency Responder 12.5(1) or Cisco Emergency Responder 12.5(1a) or Cisco Emergency Responder 12.5(1) SU1 or Cisco Emergency Responder 12.5(1) SU2 or Cisco Emergency Responder 12.5(1) SU3 or Cisco Emergency Responder 12.5(1) SU4 or Cisco Emergency Responder 12.5(1) SU5 or Cisco Emergency Responder 12.5(1) SU6 or Cisco Emergency Responder 12.5(1) SU7 or Cisco Emergency Responder 12.5(1) SU8b or Cisco Emergency Responder 12.5(1) SU9
Cisco Emergency Responder 14 or Cisco Emergency Responder 14SU1 or Cisco Emergency Responder 14SU2 or Cisco Emergency Responder 14SU3a or Cisco Emergency Responder 14SU4

COP Files Required for Upgrades to Release 15 and later

Emergency Responder now improves the encryption for upgrading files. All COP and ISO upgrade files are now signed with the SHA1SUM hash-based signing tool. SHA-1 is now deprecated and has been superseded by SHA-2 (for example SHA-512).

Post-Release 14, all new COP and ISO files are signed with the SHA512SUM hash-based signing tool.

From To Upgrade Type

12.5(1), 12.5(1a), 12.5(1) SU1, 12.5(1) SU2, 12.5(1) SU3, 12.5(1) SU4, 12.5(1) SU5, 12.5(1) SU6, 12.5(1)SU7, 12.5(1)SU8b, and 12.5(1)SU9

Apply the required Upgrade Readiness COP File (pre-upgrade): ciscocm.cer_preUpgradeCheck-X.k4.cop.sha512.

Note

If you want to upgrade Emergency Responder from Release 12.5.x (except for Release 12.5(1)SU6) to 15 and later, you must use the following COP file: ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn.

There are no Direct Refresh Upgrade supported paths for Emergency Responder Release 15 and later. Refresh Upgrades from Pre-12.5.x source to Release 15 and later is not supported.

Apply the required Upgrade Readiness COP Files (post-upgrade): ciscocm.cer_postUpgradeCheck-X.k4.cop.sha512.

14, 14SU1, 14SU2, 14SU3a, and 14SU4

Apply the required Upgrade Readiness COP File (pre-upgrade): ciscocm.cer_preUpgradeCheck-X.k4.cop.sha512.

Required COP files:

ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn
ciscocm.cer_V14_CSCwf99494_Intracluster_v1.1.zip

Note

You should apply the following COP file for Release 14SU2 before upgrading your Emergency Responder to Release 15 and later: ciscocm.cer_V14SU2_CSCwc26596-CSCwc76921_C0173-1.zip.

There are no Direct Refresh Upgrade supported paths for Emergency Responder Release 15 and later. Refresh Upgrades from Pre-12.5.x source to Release 15 and later is not supported.

Apply the required Upgrade Readiness COP Files (post-upgrade): ciscocm.cer_postUpgradeCheck-X.k4.cop.sha512.

Table 15. Emergency Responder Release 15 VM Configuration Requirements
	Previous Requirements			Release 15 Requirements
OVA Types	vCPU	RAM	Disk	vCPU	RAM	Disk
20, 000 users	1	4 GB	80 GB	2	6 GB	80 GB
30, 000 users	2	6 GB	110 GB	2	6 GB	110 GB
40, 000 users	4	6 GB	110 GB	4	6 GB	110 GB

In case you are planning to upgrade any of your 12.5.x or 14 and SUs Emergency Responder to Release 15 and later, note the following:

Deployments with 12,000 or 20,000 users having 4GB vRAM should increase the vRAM size to 6GB before upgrading to Release 15 and later.
Deployments with 20000 users having 1 vCPU should increase the vCPU to 2 before upgrading to Release 15 and later.

Caveats

This section contains information about accessing the Cisco Bug Search to find open caveats and resolved caveats.

Access Cisco Bug Search

Known problems (bugs) are graded according to severity level. These release notes contain descriptions of the following:

All severity level 1 or 2 bugs
Significant severity level 3 bugs

You can search for problems by using Cisco Bug Search.

Before you begin

To access Cisco Bug Search, you need the following items:

Internet connection
Web browser
Cisco.com user ID and password

Procedure

Step 1	To access Cisco Bug Search, go to: https://bst.cloudapps.cisco.com/bugsearch
Step 2	Log in with your Cisco.com user ID and password.
Step 3	To look for information about a specific problem, enter the bug ID number in the Search for field, then press Enter.

Open Caveats

Table 16. Open Caveats for Cisco Emergency Responder 15
Identifier	Headline
CSCwe26754	Cisco Emergency Responder SELinux protections missing in cliscript, remotesupport
CSCwi43358	CER PSAP callback rings on all shared devices of a line
CSCwi43352	CER incorrectly stores the deviceName prefix with sep for jabber soft clients

Resolved Caveats

Table 17. Resolved Caveats for Cisco Emergency Responder 15
Identifier	Headline
CSCwd71121	DRF mail alert notification not getting delivered
CSCwd75779	ciphers configurations not taking effect
CSCwd95902	SSO page is not loading properly
CSCwe24363	CER incremental discovery broken due to concurrent modification exception
CSCwf12786	CSV files are not validated for Onsite alert Name (Security name)
CSCwe61617	ALI Formatting tool GUI formatting issue
CSCwe89967	CER Hostname change leaves the cluster nodes not authenticated
CSCwe42854	Import is failing when erl type is "National e911 service provider"
CSCwc69440	CER OS Admin page redirecting to Internal IP address in UCMC/DI (NAT) environment
CSCwh29558	CER Redsky Integration "Get level of service" in ERL not supported
CSCwh82026	CER fails to update location for phones tracked via AXL incremental discovery
CSCwd56980	CER 14SU2 not handling 503 error from Intrado
CSCwc76921	Intermediate and/or root CA certs may get deleted after upgrade to 14 SU2
CSCwf99494	Validate_Network Module in Diagnose tool throws error after upgrade to 14 SU3
CSCwc41268	utils diagnose test output stuck at "test - tomcat"
CSCwc85872	Smart license registration fails for proxy transport setting
CSCwe04145	HTTP Headers Missing SameSite=Strict in Emergency Responder

Cisco Emergency Responder Version 15 Release Notes

Available Languages

Download Options

Bias-Free Language

Cisco Emergency Responder Version 15 Release Notes

Introduction

Migration of All Applications to 64-Bit System

Enhanced Security Considerations

Switch Support

Requirements

Supported Hardware and Software

Required Software

Recommended Software

Supported Phones

Supported Voice Ready Lan Switches

Supported Cisco Routers

Supported Cisco UCS Platforms

VMware Support

Supported OVAs and Capacity

Related Documentation

Important Notes

Cisco Emergency Responder 15x Supported Upgrades

COP Files Required for Upgrades to Release 15 and later

Caveats

Access Cisco Bug Search

Before you begin

Procedure

Open Caveats

Resolved Caveats

Was this Document Helpful?

Contact Cisco

This Document Applies to These Products