- Getting Started
- Installation
- Mounting Instructions and GUI Overview
- Quick Setup for Voice over IP Service
- Configuring the Network
- Configuring the Voice Settings
- Administration Settings
- Viewing the Status and Statistics
- Frequently Asked Questions
- Using the IVR for Administration
- Advanced Options for Voice Services
- Where to Go From Here
Viewing the Status and Statistics
This chapter describes how to view the status and statistics for the ATA. It includes the following sections:
System Information
Use the Status > System Information page to view information about the ATA and its current settings.
|
|
---|---|
Interface Information
Use the Status > Interface Information page to view information for the WAN interface (INTERNET port) and on SPA122 only, the LAN interface (ETHERNET port).
|
|
---|---|
|
|
---|---|
The status of the port, showing whether the port is connected to a device or disconnected. |
|
Click this button to reset to 0 the count of TX and RX packets. |
Internet Status
Use the Status > Internet Status page to view information about the WAN interface (INTERNET port).
Port Statistics (SPA122 only)
Use the Status > Port Statistics page to view information about the port activity on the WAN interface (INTERNET port) and the LAN interface (ETHERNET port).
|
|
---|---|
DHCP Server Information (SPA122 only)
Use the Status > DHCP Server Information page to view information about the DHCP server and clients.
|
|
---|---|
The remaining time in the current DHCP lease, shown in HH:MM:SS (hours:minutes:seconds) format. The page is periodically updated with the new value as the timer counts down. |
|