Step 1

From Cisco Unified CM Administration, choose Call Routing > Class of Control > Partition.

Step 2

Click Add New to create a new partition.

Step 3

In the Partition Name, Description field, enter a name for the partition that is unique to the route plan.

Step 4

Enter a comma (,) after the partition name and enter a description of the partition on the same line.

Step 5

To create multiple partitions, use one line for each partition entry.

Step 6

From the Time Schedule drop-down list, choose a time schedule to associate with this partition.

Step 7

Select one of the following radio buttons to configure the Time Zone:

• Originating Device—When you select this radio button, the system compares the time zone of the calling device to the Time Schedule to determine whether the partition is available is available to receive an incoming call.
• Specific Time Zone—After you select this radio button, choose a time zone from the drop-down list. The system compares the chosen time zone to the Time Schedule to determine whether the partition is available is available to receive an incoming call.

Step 8

Click Save.

Step 1

From Cisco Unified CM Administration, choose Call Routing > Class of Control > Calling Search Space.

Step 2

Click Add New.

Step 3

In the Name field, enter a name.

Step 4

In the Description field, enter a description.

Step 5

From the Available Partitions drop-down list, perform one of the following steps:

• For a single partition, select that partition.
• For multiple partitions, hold down the Control (CTRL) key, then select the appropriate partitions.

Step 6

Select the down arrow between the boxes to move the partitions to the Selected Partitions field.

Step 7

(Optional) Change the priority of selected partitions by using the arrow keys to the right of the Selected Partitions box.

Step 8

Click Save.

Step 1

From Cisco Unified Communications Manager Administration, choose System > Device Pool.

Step 2

To modify the Default device pool for autoregistration, perform the following actions:

1. Click Find, then select Default from the list of device pools.

2. In the Device Pool Configuration window, select the CSS to be used for autoregistration in the Calling Search Space for Auto-registration field, then click Save.

Step 3

To create a new device pool for autoregistration, perform the following actions:

1. Click Add New.

2. In the Device Pool Configuration window, enter a unique name for the device pool.

   You can enter up to 50 characters, which include alphanumeric characters, periods (.), hyphens (-), underscores (_), and blank spaces.

3. Set the following fields to match the Default device pool. See the online help for field descriptions.

   • In Cisco Unified Communications Manager Group, select Default.

   • In Date/Time Group, select CMLocal

   • In Region, select Default.

4. Select the CSS to be used for autoregistration in the Calling Search Space for Auto-registration field, then click Save.

Step 1

In Cisco Unified Communications Manager Administration, select System > Enterprise Parameters.

Step 2

In the Enterprise Parameters Configuration window, select either SCCP or SIP in the Auto Registration Phone Protocol drop-down list, then click Save.

Step 1

From Cisco Unified Communications Manager Administration, select System > Cisco Unified CM, then click Find in the Find and List Cisco Unified Communications Managers window.

Step 2

Select the Cisco Unified Communications Manager in the cluster to use for autoregistration.

Step 3

In the Cisco Unified CM Configuration widow, configure the autoregistration parameters for the node in the Auto-registration Information section, then click Save. For more information on the fields and their configuration options, see the system Online Help.

1. Select the universal device template to use for autoregistration from the drop-down list.

   If no universal device template is created for autoregistration, you can select Default Universal Device Template. Make sure that the selected template specifies the device pool that is to be used for autoregistration from User Management > User/Phone Add > Universal Device Template.

2. Select the universal line template to use for autoregistration from the drop-down list.

   If no universal line template is created for autoregistration, you can select Default Universal Line Template. Make sure that the selected template specifies the calling search space and the route partition that are to be used for autoregistration from User Management > User/Phone Add > Universal Line Template.

3. Enter the starting and ending directory numbers in to the Starting Directory Number and Ending Directory Number fields.

   Setting the starting and ending directory numbers to the same value disables autoregistration.

4. Uncheck Auto-registration Disabled on this Cisco Unified Communications Manager to enable autoregistration for this node.

Step 4

Select System > Cisco Unified CM Group, then click Find in the Find and List Cisco Unified Communications Manager Groups window.

Step 5

Select the Unified Communications Manager group to enable for autoregistration.

Step 6

In the Cisco Unified CM Group Configuration window for that group, select Auto-registration Cisco Unified Communications Manager Group to enable autoregistration for the group, then click Save.

Step 7

Install the devices that you want to auto-register.

Step 1

In Cisco Unified Communications Manager Administration, select System > Cisco Unified CM, then click Find in the Find and List Cisco Unified CM window.

Step 2

Select the Cisco Unified Communications Manager from the list of nodes.

Step 3

In the Cisco Unified CM Configuration widow for the selected node, check the Auto-registration Disabled on this Cisco Unified Communications Manager check box to disable autoregistration for this node, then click Save.

Step 1

In Cisco Unified Communications Manager Administration, select System > Cisco Unified Communications Manager

Step 2

Select the Cisco Unified Communications Manager to reset for autoregistration.

Step 3

Write down the current settings in the Starting Directory Number and Ending Directory Number fields.

Step 4

Click Auto-registration Disabled on this Cisco Unified Communications Manager, then click Save.

Step 5

Set the Starting Directory Number and Ending Directory Number fields to their previous values, then click Save.