The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This guide provides information about the tasks that you need to complete in order to configure features on the Unified Communications Manager system. Use this guide after you have configured the call control system, which includes "day 1" configurations such as inbound and outbound calling, dial plans, and network resources. For information about configuring the call control system, see System Configuration Guide for Cisco Unified Communications Manager.
Generate a phone feature list report to determine which devices support the feature that you want to configure.
|
Step 1 |
From Cisco Unified Reporting, choose System Reports. |
|
Step 2 |
From the list of reports, click Unified CM Phone Feature List. |
|
Step 3 |
Perform one of the following steps:
|
|
Step 4 |
From the Product drop-down list, choose All. |
|
Step 5 |
Click the name of the feature that you want to configure. |
|
Step 6 |
Click Submit, to generate the report. |
Feedback