The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Use this command to unregister smart licensing on Unified Communications Manager and remove the product from Cisco Smart Software Manager.
license smart deregister
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to register Unified Communications Manager with Cisco Smart Software Manager using an ID token.
license smart register idtoken <token> [force]
Administrator (admin:)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to manually renew the license usage information .
license smart renew auth
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to manually renew the license registration.
license smart renew ID
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use the following command to configure the Smart Licensing feature to send license usage information directly to Cisco Smart Software Manager. This is a default setting.
license smart transport direct
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager
 Note |
The following command is executed when Unified Communications Manager is unregistered with Cisco Smart Software Manager or satellite. |
Use the following command to configure the Smart Licensing feature to send license usage information to Cisco Smart Software Manager through an on-premise Transport Gateway or Smart Software Manager satellite. The setting is used when the product does not have internet access.
license smart transport gateway <URL>
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager
Note |
The following command is executed when Unified Communications Manager is unregistered with Cisco Smart Software Manager or satellite. |
Use the following command to configure the Smart Licensing feature to communicate with Cisco Smart Software Manager through an HTTP or HTTPS Proxy:
<proxy-server> - Proxy Server IP Address/HostName
<proxy-port> - Proxy Server Port
license smart transport proxy <proxy-server> <proxy-port>
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager
Note |
The following command is executed when Unified Communications Manager is unregistered with Cisco Smart Software Manager. |
Use this command to enable the license reservation feature.
license smart reservation enable
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to disable the license reservation feature.
license smart reservation disable
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to generate reservation request code from Unified Communications Manager product.
license smart reservation request
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to cancel the reservation process before the authorization code obtained from Cisco Smart Software Manager against the Product request code is installed.
license smart reservation cancel
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to install the license reservation authorization-code generated on the Cisco Smart Software Manager.
license smart reservation install "<authorization-code>"
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to install the license reservation authorization-code file generated on the Cisco Smart Software Manager.
license smart reservation install-file <url>
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Note |
url is mandatory Path to the authorization-code file on SFTP server in below format: sftp://<HostName/IP>:<port>/<Path to Authorization-Code file> |
Use this command to generate a return code that must be entered into the Cisco Smart Software Manager to return the licenses to the virtual account pool.
license smart reservation return
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to generate a return code using the authorization code specified on the command line. The return code must be entered into the Cisco Smart Software Manager to return the licenses to the virtual account pool.
license smart reservation return authorization "<authorization-code>"
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Feedback