The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Use this command to unregister smart licensing on Unified Communications Manager and remove the product from Cisco Smart Software Manager.
license smart deregister
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to register Unified Communications Manager with Cisco Smart Software Manager using an ID token.
license smart register idtoken <token> [force]
Administrator (admin:)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to manually renew the license usage information .
license smart renew auth
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to manually renew the license registration.
license smart renew ID
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use the following command to configure the Smart Licensing feature to send license usage information directly to Cisco Smart Software Manager. This is a default setting.
license smart transport direct
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager
 Note |
The following command is executed when Unified Communications Manager is unregistered with Cisco Smart Software Manager or satellite. |
Use the following command to configure the Smart Licensing feature to send license usage information to Cisco Smart Software Manager through an on-premise Transport Gateway or Smart Software Manager satellite. The setting is used when the product does not have internet access.
license smart transport gateway <URL>
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager
Note |
The following command is executed when Unified Communications Manager is unregistered with Cisco Smart Software Manager or satellite. |
Use the following command to configure the Smart Licensing feature to communicate with Cisco Smart Software Manager through an HTTP or HTTPS Proxy:
<proxy-server> - Proxy Server IP Address/HostName
<proxy-port> - Proxy Server Port
license smart transport proxy <proxy-server> <proxy-port>
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager
Note |
The following command is executed when Unified Communications Manager is unregistered with Cisco Smart Software Manager. |
Note |
When user gets the prompt Do you want to enable Authentication based proxy? Yes/No Enter "Yes" if you want to register Unified Communication Manager with Cisco Smart Software Manager using authentication based proxy server. |
admin:license smart transport proxy <proxy-server> <proxy-port>
Do you want to enable Authentication based proxy ? y/n y
User Name : xyz
Password: *********
Result: Transport settings updated successfully.
Use this command to clear all licensing information from the trusted store and memory, except the evaluation period count down and the Specific License Reservation (SLR) sequence number.
license smart factory reset
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Cisco Unified Communications Manager
Use this command to enable the license reservation feature.
license smart reservation enable
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to disable the license reservation feature.
license smart reservation disable
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to generate reservation request code from Unified Communications Manager product.
license smart reservation request
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to cancel the reservation process before the authorization code obtained from Cisco Smart Software Manager against the Product request code is installed.
license smart reservation cancel
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to install the license reservation authorization-code generated on the Cisco Smart Software Manager.
license smart reservation install "<authorization-code>"
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to install the license reservation authorization-code file generated on the Cisco Smart Software Manager.
license smart reservation install-file <url>
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Note |
url is mandatory Path to the authorization-code file on SFTP server in below format: sftp://<HostName/IP>:<port>/<Path to Authorization-Code file> |
Use this command to generate a return code that must be entered into the Cisco Smart Software Manager to return the licenses to the virtual account pool.
license smart reservation return
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to generate a return code using the authorization code specified on the command line. The return code must be entered into the Cisco Smart Software Manager to return the licenses to the virtual account pool.
license smart reservation return authorization "<authorization-code>"
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Unified Communications Manager and Cisco Unity Connection
Use this command to allow user with Smart Account for whom Export Restrictions apply, to request a regulatory export license from Cisco Smart Software Manager or satellite.
The command returns an export authorization key if regulatory Export License is available from Cisco Smart Software Manager or satellite and enable export-controlled functionality on the product.
license smart export request local <exportfeaturename>
Note |
|
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Cisco Unified Communications Manager, Cisco Unity Connection.
Use this command to allow a return, previously requested export restricted license to Cisco Smart Software Manager or satellite. The export authorization key for the export restricted feature is removed from the system.
license smart export return local <exportfeaturename>
Note |
|
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Cisco Unified Communications Manager, Cisco Unity Connection.
Use this command to allow user with Smart Account for whom Export Restrictions apply, to cancel the automatic retry of previously failed export request or return from Cisco Smart Software Manager or satellite.
license smart export cancel
Administrator (admin)
Command privilege level: 4
Allowed during upgrade: Yes
Applies to: Cisco Unified Communications Manager, Cisco Unity Connection.
Feedback