Microsoft Component Configuration for SIP Federation
The following tables provide a brief checklist to configure federation on the Microsoft OCS and Access Edge servers. For detailed instructions on setting up and deploying the OCS server and the Access Edge server, refer to the Microsoft documentation.
Task |
Procedure |
---|---|
Enable Global Federation Setting |
|
Configure the Access Edge server address |
|
Enable Each Front End Federation Setting |
You need to enable the federation setting for each front-end server that is federating:
|
Check your users are enabled for MOC and for Federation |
|
Configure the security certificates |
|
Task |
Procedure |
||||
---|---|---|---|---|---|
Configure DNS |
In the Microsoft enterprise deployment, you need to configure an external SRV record for all Access Edge Servers that points to _sipfederationtls._tcp.domain, over port 5061, where domain is the name of the SIP domain of your organization. This SRV should point to the external FQDN of the Access Edge server. |
||||
Configure IM and Presence Service as an IM Provider |
In the IM and Presence Service enterprise deployment, you need to configure a DNS SRV record for each IM and Presence Service domain. The DNS SRV record should point to _sipfederationtls._tcp.IM and Presence_domain over port 5061, where IM and Presence _domain is the name of the IM and Presence Service domain. This DNS SRV should point to the public FQDN of the IM and Presence Service node. |
||||
Check the Access Method Settings |
|
||||
Configure Access Edge to use TLSv1 |
|
||||
Configure the security certificates |
|