Silicone Covers
You can use the Cisco IP Phone Silicone Cover to protect your desk phone and handset.
The case offers the following benefits:
-
Hypoallergenic
-
Resistant to wear from a variety of cleaning agents.
Note
Use a low-strength cleaning agent to prolong the life and look of the case.
-
Reduces damage when the handset is dropped.
For part numbers and other additional information, refer to the phone model data sheet. The Cisco IP Phone 8800 Series data sheets can be found here https://www.cisco.com/c/en/us/products/collaboration-endpoints/unified-ip-phone-8800-series/datasheet-listing.html. The Cisco IP Phone 7800 Series data sheets can be found here https://www.cisco.com/c/en/us/products/collaboration-endpoints/unified-ip-phone-7800-series/datasheet-listing.html.
To check which phone model you have, press Applications and select Phone information. The Model number field shows your phone model.
Cisco IP Phone |
Cisco IP Phone Silicone Cover |
Notes |
||
---|---|---|---|---|
Cisco IP Phone 7821 |
|
|||
Cisco IP Phone 7841 |
|
|||
Cisco IP Phone 8811, 8841, 8851, 8851NR, 8861, and 8861NR |
|
|
||
Cisco IP Phone 8845, 8865, and 8865NR |
|
|
||
Cisco IP Phone Handset |
|
Install the Cisco IP Phone Silicone Cover
Procedure
Step 1 |
Position the phone facing you. |
Step 2 |
Remove the handset from the cradle. |
Step 3 |
Align the cover over the phone with the handset on the left. |
Step 4 |
Secure the cover around the corners and side of the phone. The cover should fit securely over the phone without much resistance. |
Step 5 |
Place the handset back on the cradle. |
Install the Cisco IP Phone Handset Cover
Procedure
Step 1 |
Remove the handset from the phone cradle. |
Step 2 |
Disconnect the cable from the handset. |
Step 3 |
Slide the silicone cover over the handset until the ear cup is completely inside the cover. |
Step 4 |
Pull the cover over the other end of the handset. |
Step 5 |
Make sure the cover is flush against the handset and that the cable port is unobstructed. |
Step 6 |
Reconnect the handset to the phone and return it to the cradle. |
Clean the Silicone Cover
Procedure
Step 1 |
Remove the silicone cover. |
||
Step 2 |
Clean the cover.
|
||
Step 3 |
Dry the cover thoroughly. Don't put it back on the phone until it is completely dry. |
||
Step 4 |
Put the cover back on the phone. |