Client Configuration Workflow
Procedure
Command or Action | Purpose | |
---|---|---|
Step 1 |
Introduction to Client Configuration |
|
Step 2 |
Create and Host the Client Configuration Files |
|
Step 3 |
Set Parameters on Phone Configuration for Desktop Clients |
|
Step 4 |
Set Parameters on Phone Configuration for Mobile Clients |
|
Step 5 |
Configure Proxy Setting—Optional |
Introduction to Client Configuration
Cisco Jabber can retrieve configuration settings from the following sources:
-
Service Profiles—You can configure some client settings in UC service profiles on Cisco Unified Communications Manager release 9 and later. When users launch the client, it discovers the Cisco Unified Communications Manager home cluster using a DNS SRV record and automatically retrieves the configuration from the UC service profile.
Applies to on-premises deployments only.
-
Phone Configuration—You can set some client settings in the phone configuration on Cisco Unified Communications Manager release 9 and later. The client retrieves the settings from the phone configuration in addition to the configuration in the UC service profile.
Applies to on-premises deployments only.
-
Cisco Unified Communications Manager IM and Presence Service—You can enable instant messaging and presence capabilities and configure certain settings such as presence subscription requests.
In the Advanced settings window, if you select Cisco IM & Presence, the client retrieves UC services from Cisco Unified Communications Manager IM and Presence Service. The client does not use service profiles or SSO discovery.
Applies to on-premises deployments only.
-
Client Configuration—You can set client configuration parameters that are applied when users sign in, by either:
-
Set the client configuration parameters with Unified CM.
-
Create XML files using an XML editor that contain configuration parameters. You then host the XML files on a TFTP server.
-
-
Webex Administration Tool—You can configure some client settings with the Webex Administration Tool.
You can upload a
jabber-config.xml
client configuration file into the Webex Administration Tool. You can apply separate configuration files for groups in the Webex Messenger Administration Tool. When the client successfully connects to Webex Messenger it downloads the XML file and the configuration is applied.The client will use the following order for configuration settings:
-
Settings in Webex Messenger Administration Tool
-
Settings in
jabber-config.xml
file from Webex Messenger Administration Tool.Note
Group configuration file settings take priority over the configuration file in Webex Messenger Administration Tool.
-
Settings in
jabber-config.xml
file from the TFTP server.
If there are any conflicts with configuration settings, the settings set in Webex Administration tool will take priority over this configuration file.
Applies to cloud-based deployments only.
-
Create and Host the Client Configuration Files
For on-premises and hybrid cloud-based deployments, create client configuration files and host them on the Cisco Unified Communications Manager TFTP service.
For cloud-based deployments, configure the client with the Webex Administration Tool. However, you can optionally set up a TFTP server to configure the client with settings that are not available in Webex Administration Tool.
For Cisco Jabber for iPhone and iPad and Cisco Jabber for Android, you must create a global configuration file to set up:
-
Directory integration for on-premises deployments.
-
Voicemail service credentials for hybrid-cloud deployments.
Note |
In most environments, Cisco Jabber for Windows and Cisco Jabber for Mac do not require any configuration to connect to services. Create a configuration file only if you require custom content such as automatic updates, problem reporting, or user policies and options. |
Before you begin
Note the following configuration file requirements:
-
Configuration filenames are case-sensitive. Use lowercase letters in the filename to prevent errors and to ensure that the client can retrieve the file from the TFTP server.
-
Use UTF-8 encoding for the configuration files.
-
The client cannot read configuration files that do not have a valid XML structure. Check the structure of your configuration file for closing elements and correct nesting of elements.
-
Use only valid XML character entity references in your configuration file. For example, use & instead of &. If your XML contains invalid characters, the client cannot parse the configuration file.
To validate your configuration file, open the file in Microsoft Internet Explorer.
-
If Internet Explorer displays the entire XML structure, your configuration file is valid.
-
If Internet Explorer displays only part of the XML structure, your configuration file likely contains invalid characters or entities.
-
Procedure
Command or Action | Purpose | |
---|---|---|
Step 1 |
Specify your TFTP server address for the client to enable access to your configuration file. |
|
Step 2 |
Configure the clients for users in your deployment. |
|
Step 3 |
Apply different configuration to different set of users. |
|
Step 4 |
Host configuration files on any TFTP server. |
|
Step 5 |
Restart the TFTP server before the client can access the configuration files. |
Specify Your TFTP Server Address
The client gets configuration files from a TFTP server.
Procedure
Command or Action | Purpose | ||
---|---|---|---|
Specify your TFTP server address so the client can access your configuration file. |
|
Specify TFTP Servers in Phone Mode
Procedure
Command or Action | Purpose |
---|---|
If you deploy the client in phone mode, you can provide the address of the TFTP server as follows:
|
Create Global Configurations
The client downloads the global configuration file from your TFTP server during the sign in sequence. Configure the client for all users in your deployment.
Before you begin
If the structure of your configuration file is not valid, the client cannot read the values you set. Review the XML samples in this chapter for more information.
Procedure
Step 1 |
Create a file named jabber-config.xml with any text editor.
|
Step 2 |
Define the required configuration parameters in jabber-config.xml. |
Step 3 |
Host the group configuration file on your TFTP server. If your environment has multiple TFTP servers, ensure that the configuration file is the same on all TFTP servers. |
Create Group Configurations
Group configuration files apply to subsets of users and are supported on Cisco Jabber for desktop (CSF devices) and on Cisco Jabber for mobile devices. Group configuration files take priority over global configuration files.
If you provision users with CSF devices, specify the group configuration filenames in the Cisco Support Field field on the device configuration. If users do not have CSF devices, set a unique configuration filename for each group during installation with the TFTP_FILE_NAME argument.
Before you begin
If the structure of your configuration file is not valid, the client cannot read the values you set. Review the XML samples in this chapter for more information.
Procedure
Step 1 |
Create an XML group configuration file with any text editor. The group configuration file can have any appropriate name; for example, jabber-groupa-config.xml. |
Step 2 |
Define the required configuration parameters in the group configuration file. |
Step 3 |
Add the group configuration file to applicable CSF devices. |
Step 4 |
Host the group configuration file on your TFTP server. |
Host Configuration Files
You can host configuration files on any TFTP server. However, we recommend hosting configuration files on the Cisco Unified Communications Manager TFTP server, which is where the device configuration file resides.
Procedure
Step 1 |
Open the Cisco Unified OS Administration interface on Cisco Unified Communications Manager. |
Step 2 |
Select . |
Step 3 |
Select Upload File. |
Step 4 |
Select Browse in the Upload File section. |
Step 5 |
Select the configuration file on the file system. |
Step 6 |
Do not specify a value in the Directory text box in the Upload File section. You should leave an empty value in the Directory text box so that the configuration file resides in the default directory of the TFTP server. |
Step 7 |
Select Upload File. |
Restart Your TFTP Server
You must restart your TFTP server before the client can access the configuration files.
Procedure
Step 1 |
Open the Cisco Unified Serviceability interface on Cisco Unified Communications Manager. |
Step 2 |
Select . |
Step 3 |
Select Cisco Tftp from the CM Services section. |
Step 4 |
Select Restart. A window displays to prompt you to confirm the restart. |
Step 5 |
Select OK. The Cisco Tftp Service Restart Operation was Successful status displays. |
Step 6 |
Select Refresh to ensure the Cisco Tftp service starts successfully. |
What to do next
To verify that the configuration file is available on your TFTP server, open the configuration file in any browser. Typically, you can access the global configuration file at the following URL: http://tftp_server_address:6970/jabber-config.xml
Configuration File
For detailed information on the jabber-config.xml configuration file structure, group elements, parameters, and examples, see the Parameters Reference Guide for Cisco Jabber.
Set parameters on phone configuration for desktop clients
The client can retrieve configuration settings in the phone configuration from the following locations on Cisco Unified Communications Manager:
- Enterprise Phone Configuration
-
Applies to the entire cluster.
Note
For users with only IM and Presence Service capabilities (IM only), you must set phone configuration parameters in the Enterprise Phone Configuration window.
- Common Phone Profile Configuration
-
Applies to groups of devices and takes priority over the cluster configuration.
- Cisco Unified Client Services Framework (CSF) Phone Configuration
-
Applies to individual CSF desktop devices and takes priority over the group configuration.
Parameters in Phone Configuration
The following table lists the configuration parameters you can set in the Product Specific Configuration Layout section of the phone configuration and maps corresponding parameters from the client configuration file:
Desktop Client Settings Configuration | Description | ||
---|---|---|---|
Video Calling |
Enables or disables video capabilities.
|
||
File Types to Block in File Transfer |
Restricts users from transferring specific file types. Set a file extension as the value, for example, .exe. Use a semicolon to delimit multiple values, for example,
|
||
Automatically Start in Phone Control |
|
||
Jabber For Windows Software Update Server URL |
Specifies the URL to the XML file that holds client update information. The client uses this URL to retrieve the XML file from your web server. In hybrid cloud-based deployments, you should use the WebexAdministration Tool to configure automatic updates. |
||
Problem Report Server URL |
Specifies the URL for the custom script that allows users to submit problem reports. |
Set Parameters on Phone Configuration for Mobile Clients
The client can retrieve configuration settings in the phone configuration from the following locations on Cisco Unified Communications Manager:
-
Cisco Dual Mode for iPhone (TCT) Configuration — Applies to individual TCT devices and takes priority over the group configuration.
-
Cisco Jabber for Tablet (TAB) Configuration — Applies to individual TAB devices and takes priority over the group configuration.
Parameters in Phone Configuration
The following table lists the configuration parameters you can set in the Product Specific Configuration Layout section of the phone configuration and maps corresponding parameters from the client configuration file:
Parameter |
Description |
||
---|---|---|---|
On-Demand VPN URL |
URL for initiating on-demand VPN.
|
||
Preset Wi-fi Networks |
Enter the SSIDs for Wi-Fi networks (SSIDs) approved by your organization. Separate SSIDs with a forward slash (/). Devices do not connect to secure connect if connected to one of the entered Wi-Fi networks. |
||
Default Ringtone |
Sets the default ringtone to Normal or Loud. |
||
Video Capabilities |
Enables or disables video capabilities.
|
||
Dial via Office
|
Enables or disables Dial via Office.
|
Configure Proxy Setting—Optional
Your client might use proxy settings to connect to services.
The following limitations apply when using a proxy for these HTTP requests:
-
Proxy Authentication is not supported.
-
Wildcards in the bypass list are supported.
-
Cisco Jabber supports proxy for HTTP request using HTTP CONNECT, but does not support proxy when using HTTPS CONNECT.
-
Web Proxy Auto Discovery (WAPD) is not supported and must be disabled.
If necessary, configure the proxy settings by following the steps for your client type.
Configure Proxy Settings for Cisco Jabber for Windows
Configure proxy settings for Windows in the Local Area Network (LAN) settings for Internet properties.
Procedure
Step 1 |
In the Connections tab select LAN Settings. |
Step 2 |
Configure a proxy using one of the following options:
|
Configure Proxy Settings for Cisco Jabber for Mac
Configure proxy settings for Mac in System Preferences.
Procedure
Step 1 |
Select |
Step 2 |
Choose your network service from the list and select . |
Step 3 |
Configure a proxy using one of the following options:
|
Configure Proxy Settings for Cisco Jabber iPhone and iPad
Configure proxy settings in the Wi-Fi settings of an iOS device using one of the following methods:
Procedure
Step 1 |
Select
|
Step 2 |
Select and specify an explicit proxy address. |
Configure Proxy Settings for Cisco Jabber for Android
Procedure
Configure proxy settings in the Wi-Fi settings of an Android device using one of the following methods:
|