Feature Defaults Quick Reference
The following table indicates what features are enabled or disabled by default.
|
Feature |
Default |
||
|---|---|---|---|
|
5G capable SPGW Selection by MME |
Enabled - Always-on |
||
|
Access Restriction Support on S6d Interface |
Disabled - Configuration Required |
||
|
Cell Broadcast Center - SBc Interface |
Enabled - Configuration Required |
||
|
Collision Handling for Path-Update during Bearer Creation |
Enabled - Always-on |
||
|
Configuration of UE Radio Capability IE Size |
Enabled - Configuration Required |
||
|
Counters for Reason 50/51 on MME and TAI |
Enabled - Always-on |
||
|
Deprecated IPSec/IKEv2 Algorithms Support |
Enabled - Always-on |
||
|
Deprecation of Manual Scaling |
Disabled - Configuration Required |
||
|
Delay Value IE Support in MME |
Enabled - Configuration Required |
||
|
Discontinuation of ORBEM Configuration Support |
Enabled - Always-on |
||
|
ERAB Setup Retry Handling |
Disabled - Configuration Required |
||
|
ESC, UEM and VNF Upgrade Support on VMware VCD |
Disabled - Configuration required |
||
|
Excluding SGWs During Relocation Procedures |
Enabled - Always-on |
||
|
GM Manager Queue Handling |
Disabled – Configuration Required |
||
|
Handling of APN Configuration in ISDR from HSS |
Enabled – Always-on |
||
|
Handling Temporary Failure During UBR-MBC Collision |
Disabled-Configuration Required |
||
|
Handling the TAU and Location Update Request/Response |
Enabled - Always-on |
||
|
IPv6 MTU Option Support in RA Message Enhancement |
Enabled - Always-on |
||
|
Mapped-UE-Usage-Type IE Support in MME |
Disabled - Configuration Required |
||
|
MEC Location Management Support |
Enabled - Always-on |
||
|
MME Handling of Purge Procedure |
Enabled - Configuration Required |
||
|
MME-MSC/VLR SGs Disconnect |
Enabled – Configuration Required |
||
|
MME Manager Status Traps |
Enabled - Always-on |
||
|
MME Support for Service Impacting KPI Bulk Statistics |
Enabled - Always-on |
||
|
Monitor Protocol Support for DCNR |
Enabled - Always-on |
||
|
NB-IOT EDRX Supported values in ATTACH/TAU Accept |
Enabled - Configuration Required |
||
|
NETCONF Event Notification Support for Auto-scaleout |
Disabled – Configuration Required
|
||
|
Network Access Identifier Field Removal from MSISDN |
Enabled - Always-on |
||
|
NFVO-based Deployment of UGP VNF |
Disabled - Configuration required |
||
|
OWM Integra Deployment Automation on VMware VCD |
Disabled - Configuration required |
||
|
Paging eDRX H-SFN Changed to 10 Bits Counter |
This feature is enabled/disabled, when the eDRX feature is enabled/disabled. |
||
|
RAB Release for Attach on the Same IU Connection |
Disabled - Configuration Required |
||
|
Service Impacting SGSN KPI Bulk Statistics |
Enabled - Always-on |
||
|
SRVCC Delete Bearer Request Handling |
Disabled – Configuration Required |
||
|
SRVCC HO Timer Configuration for ESM Notification |
Enabled – Configuration Required |
||
|
Support for Password ExpiryWarning |
Enabled - Always-on |
||
|
Target MME Load Balancing During Handover in MME |
Enabled - Always-on |
Feedback