Displays QoS Class Identifier-Quality of Service (QCI-QoS) mapping tables configured on this system.

all

Displays information for all QCI-QoS mapping tables configured on this system.

name table_name

Displays information for an existing QCI-QoS mapping table specified as an alphanumeric string of 1 through 63 characters.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays mapping QoS information in a packet to internal-qos marking.

Displays named table for the internal to L2 mapping values, like 802.1p and MPLS.

name table_name

Displays information for an existing QoS L2 mapping table.

table_name is an existing table specified as an alphanumeric string of 1 through 80 characters.

system-default

Displays information for the default system internal mapping to L2 values.

This command is only supported on PACs running on ST16 platforms. It has been deprecated for use on ASR 5x00 platforms.

Displays Network Processing Unit (NPU) QoS statistics per priority queue for a particular processing card:

slot slot_num

Displays statistics for the processing card identified by its slot number as an integer from 1 through 8 and 10 through 16 on the ASR 5000, or 1 through 4 and 7 through 10 on the ASR 5500.

Displays and statistic information for RADIUS accounting and/or authentication.

accounting servers

Lists information for configured accounting servers and their current state.

authentication servers

Lists information for configured authentication servers and their current state.

[ detail ]

Displays historical state information for configured servers of the specified type.

admin-status { enabled | disabled }

Displays information for accounting and/or authentication servers with an administrative status of "enabled" or "disabled".

radius group group_name

Displays the authentication/authorization RADIUS server group information for an existing server group specified as an alphanumeric string of 1 through 63 characters.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

This command displays the RADIUS authentication and accounting servers or server group that are configured for use by charging services.

radius group group_name all

Displays all RADIUS counter information for an existing server group configured for use by charging services. group_name is specified as an alphanumeric string of 1 through 63 characters.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays information about the RADIUS client configured on the system.

status

Displays a status summary for the RADIUS client.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays RADIUS server and statistic information for accounting and/or authentication.

counters { all | server ip_address [ port number ] }

all : Displays statistics for all servers.

server ip_address : Displays statistics for the server specified by its IPv4 address.

port number : Displays statistics for a port on the server specified as an integer from 0 through 65535.

radius group group_name all

Displays all RADIUS counter information for an existing server group specified as an alphanumeric string of 1 through 63 characters.

all : Displays statistics for all servers.

dynamic-auth

Displays Dynamic Authorization counters for configured RADIUS servers.

summary [ all-contexts [ verbose ] ]

Displays a summary of RADIUS statistics for all the RADIUS servers configured in a specific context.

all-contexts : Displays a summary of RADIUS statistics for all RADIUS servers configured in all context. If verbose is also specified, the information is displayed in more detail.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays statistics associated with Recovery Control Task (RCT) events, including migrations, switchovers and shutdowns. RCT statistics are associated with card-to-card session recovery activities.

[verbose]

Displays full details about RCT events, current status, time stamps and other associated information. This mode is only available if a session recovery event has occurred on the system. The default mode is to display a brief summary of RCT events.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays the resource information by CPU or session.

cpu | npu | session

cpu : Displays resource information by CPU.

npu : Displays resource information by network processing unit (NPU).

session : Displays resource information by session.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays the statistics for all active RLF contexts.

facility_num

Displays the context information for the specified facility. num must be an integer from 1 through 16.

endpoint endpoint_name

Displays the context information only for the endpoint specified as a string of size ranging from 1 through 63 characters.

realm realm_name

Displays the context information only for the realm specified as a string of size ranging from 1 through 127 characters.

peer-host host_name

Displays the context information only for the host specified as a string of size ranging from 1 through 63 characters.

gtpc-context-name gtpccontext_name

Displays RLF statistics of GTPC services PGW and GGSN

instance facility_num

Displays the facility information for specific instance.

summary

Displays summary information.

verbose

Specifies to display detailed (all available) information. If not specified, concise information is displayed.

Displays the instance level stats. When multiple diamproxies are active, an RLF context's instance is created on each diamproxy or session manager for each peer.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays the memory used by RLF for processing the messages.

facility_num

Displays the information for the specified facility. num must be an integer from 1 through 16.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays the statistics for all active RLF templates.

all

Displays the statistics information for all the configured RLF templates.

name template_name

Displays the statistics information for the specified RLF template. template_name must be an integer from 1 through 127 characters.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays Robust Header Compression (ROHC) counters for all active calls.

all

Displays all information.

callid call_id

Displays the information only for the call ID specified as a 4-byte hexadecimal number.

imsi imsi_num

Displays information for the specified IMSI (International Mobile Subscriber Identity). The IMSI is an up to 15-digit field which identifies the subscriber's home country and carrier: 3 digits of Mobile Country Code (MCC), 2 or 3 digits of Mobile Network Code (MNC), followed by the Mobile Subscriber Identification Number MSIN. Example: 123-45-678910234. May also be entered as 12345678910234.

ip-address ip_addr

Displays information only for the mobile subscriber IP address specified in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal notation.

msid msid_num

Displays information only for a mobile subscriber ID from 7 to 16 digits for an IMSI, MIN, or RMI.

username user_name

Displays radio-packet (R-P) interface information only for a specified username.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays statistics and counters for Robust Header Compression (ROHC) IP header compression.

pdsn-service pdsnsvc_name

Displays ROHC statistics and counters for the an existing PDSN service specified as an alphanumeric string of 1 through 63 characters.

asngw-service asngwsvc_name

Displays ROHC statistics and counters for an existing ASN-GW service specified as an alphanumeric string of 1 through 63 characters.

hsgw-service hsgwsvc_name

Displays ROHC statistics and counters for an existing HSGW service specified as an alphanumeric string of 1 through 63 characters.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays entries for all route maps or a specific route map.

name route-map name

Displays information for a route-map specified as an alphanumeric string of 1 through 79 characters.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays radio-packet (R-P) interface statistics using the filtering options specified.

counters | full | summary

Provides an optional modifier to the output for the desired level and type of information.

counters : Displays R-P protocol statistics.

full : Displays all available information.

summary : Displays only a summary of available information.

These options are not available in conjunction with the keywords statistics or service-option statistics .

all | callid call_id | msid ms_id | peer-address peer_ip_address | username user_name

all : Displays all R-P information.

callid call_id : Displays only the information for the call ID specified as a 4-digit hexadecimal number.

msid ms_id : Displays information only for a mobile subscriber ID specified by 7 to 16 digits for an IMSI, MIN, or RMI.

peer-address peer_ip_address : Displays R-P information for the peer IP address of the PCF specified in IPv4 dotted-decimal notation.

username user_name : Displays R-P information for the specified username.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays the radio-packet (R-P) service option statistics using the filtering options specified.

number svc_option_num | pdsn-service pdsn_name

Default: display statistics for all service option numbers and associated packet data services.

number svc_option_num : Displays statistics for the specified service option number.

pdsn-service pdsn_name : Displays statistics for the specified packet data service.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays the radio-packet (R-P) protocol statistics using the filtering options specified.

hsgw-service hsgw_name

Specifies an eHRPD Serving Gate Way service followed by the name of an HSGW service specified as an alphanumeric string of 1 through 63 characters.

pcf-summary [ wf1 ]

Displays a session summary of Packet Control Function (PCF) statistics.

The wf1 option displays PCF statistics in wide-format number 1.

pdsn-service pdsn_name

Displays the statistics information for the pdsn-service specified as an alphanumeric string of 1 through 63 characters.

peer-address { peer_address | | all }

• peer_address : Displays statistics only for the peer specified by its IP address in IPv4 dotted-decimal notation.

• all : Displays statistics for all peers.

verbose

Displays more detailed statistics.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays Resource Reservation Protocol (RSVP) counters using the filtering options specified.

all | callid call_id | msid ms_id | username user_name

all : Displays all RSVP information.

callid call_id : Displays information only for the call ID specified as a 4-digit hexadecimal number.

msid ms_id : Displays information for a mobile subscriber ID specified a string of 7 to 16 digits for an IMSI, MIN, or RMI.

username user_name : Displays RSVP information only for the specified username.

Displays Resource Reservation Protocol (RSVP) statistics using the filtering options specified.

pdsn-service service | sessmgr instance instance

pdsn-service service : Displays statistics for the service specified as an alphanumeric string of 1 through 63 characters.

sessmgr instance instance : Displays statistics for the specified session manager instance.

Displays the system-level status indicating whether or not the encryption daughter card (EDC) is required on PACs within chassis.

[local]chicago# show requirement pac daughtercard 
The encryption daughtercard is not required for all PACs 
[local]chicago# 

Displays the configuration information for the S102 service(s).

all

Displays information for all S102 service configurations.

name s102_service_name

Displays configured information for the specified S102 service configuration.

s102_service_name Enter a string of 1 through 63 alphanumeric characters to identify the uniquely named S102 service.

statistics { all | name s102_service_name }

Generates statistical output indicating the status and activity of the interface for either all S102 services configured on the MME or for the specific named S102 service.

s102_service_name Enter a string of 1 through 63 alphanumeric characters to identify the uniquely named S102 service.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays statistics related to S4 functionality on the SGSN.

all

Show all S4-SGSN statistics from all session managers.

smgr-instance

Show the statistics for a session manager instance of the SGSN service. <instance_number> must be specified as an integer between 1 and 65535.

Important

If no option is specified, then S4-SGSN statistics from all session managers will be added up and the cumulative totals will be shown.

Displays configuration information and node-level statistics for System Architecture Evolution Gateway (SAEGW) services on this system.

all

Displays configuration information for all SAEGW services configured on this system.

name service_name

Displays configuration information for an existing SAEGW service specified as an alphanumeric string of 1 through 63 characters.

statistics { all | name service_name } [ function { pgw [ interface { GnGp | S2a | S5S8 } ] | sgw } ] [ verbose ] }

Displays node-level statistics for SAEGW.

all : Displays consolidated node-level statistics for all SAEGW services on the system.

name service_name : Displays node-level statistics for an existing SAEGW service specified as an alphanumeric string of 1 through 63 characters.

function : Displays node-level statistics of one of the following functions:

interface : Displays node-level statistics of P-GW function with respect to one of the following interfaces:

If verbose is also specified, the information is displayed in more detail.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of grep and more , refer to the Regulating a Command's Output section in the Command Line Interface Overview chapter.

Displays configuration and/or statistical information for SaMOG services on this system.

all

Displays all SaMOG services.

name name

Displays information for specific SaMOG service name.

name is a string of size 1 to 63 .

statistics

Displays Node level Statistics for SaMOG.

verbose

Specifies Detailed statistics.

| { grep grep_options | more }

Pipes (sends) the output of this command to the specified command. You must specify a command to which the output of this command will be sent.

For details on the usage of grep and more , refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays information about SBc interface services configured on this system.

all

Displays information about all SBc interface services configured on this system.

cbc-associations { all | sbc-service-name sbc_svc_name

Displays information about the SBc interface associations with the Cell Broadcast Centers (CBC).

all shows information about all CBC associations.

sbc-service-name sbc_svc_name shows information only for CBC associations for the SBc service name specified as an alphanumeric string of 1 through 63 characters.

sbc-service-name sbc_svc_name

Displays information only for the SBc service specified as an alphanumeric string of 1 through 63 characters.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays statistics about SBc interface services configured on this system.

all

Displays statistics for all SBc services configured on this system.

peer-id peer_id

Displays statistics for a Cell Broadcast Center (CBC) peer association specified as an integer value from 0 through 4294967295.

Use the show sbc-service cbc-associations all command to display the available CBC association peer IDs.

sbc-service-name sbc_svc_name

Displays statistics for an SBc service specified as an alphanumeric string of 1 through 63 characters.

verbose

Displays expanded statistics.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays SS7 Signaling Connection Control Part (SCCP) network configuration and status information.

ntwk_index

Displays configuration and status information for the SSCP network configuration with the network index specified as an integer from 1 through 12.

all

Displays all available configuration and status information for all SSCP networks.

status all

Displays all status information for specified SCCP networks.

status dpc

Displays status information for the device in the SCCP network identified by the destination point-code (DPC).

Displays SS7 Signaling Connection Control Part (SCCP) statistics for services that use the SCCP protocol.

iups-service iups_srvc_name

Displays SCCP protocol statistics for an existing IuPS service in the current context specified as an alphanumeric string of 1 through 63 characters.

map-service map_srvc_name

Displays SCCP protocol statistics for the an existing Mobile Application Part (MAP) service in the current context specified as an alphanumeric string of 1 through 63 characters.

sccp-network ntwk_index

Displays SCCP protocol statistics for the SSCP network configuration with a network index specified as an integer from 1 through 12.

Displays SCEF Service configuration and status information.

all

Displays all available configuration and status information for all SCEF Services.

name service_name

Displays all status information for a specified SCEF service name.

summary

Displays the summary of the available SCEF service statistics.

Displays configuration information for Stream Control Transmission Protocol (SCTP) parameter templates configured on this system.

all

Displays configuration information for all SCTP parameter templates configured on this system.

name template_name

Displays configuration information for an existing SCTP parameter template specified as an alphanumeric string of 1 through 63 characters.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays information related to the security settings of the system, such as whether this StarOS version is a Trusted build. This command also displays information about the Talos Intelligence Server.

category url url

Displays Talos Intelligence categorization information for the specified URL. url must be an alphanumeric string from 1 through 512 characters.

configuration

Displays information for StarOS trusted builds. This keyword only provides information if the StarOS build is a trusted build. Refer to the System Administration Guide for more details about trusted builds.

server talos-intelligence server_name [ verbose ]

Displays Talos Intelligence server information. server_name must be specified as a case-sensitive alphanumeric string from 1 through 31 characters.

verbose

Displays operational status of each database instance.

Displays configuration information for all services currently configured on this system.

Displays historical information for session-related counters based on data collected in bulk statistics.

all

Displays data for all counters either as a single, wide table or multiple graphs.

arrived

Displays only data for "total calls arrived" counters. This is based on the "sess-ttlarrived" statistic in the system schema.

callops

Displays data for all call operations. This is a calculated value based on the following formula:

(arrived + rejected + disconnected + failed + handoffs + renewals)

connected

Displays only data for "total calls connected" counters. This is based on the "sess-ttlconnected" statistic in the system schema.

disconnected

Displays only data for "total calls disconnected" counters. This is based on the "sess-ttldisconn" statistic in the system schema.

failed

Displays only data for "total calls failed" counters. This is based on the "sess-ttlfailed" statistic in the system schema.

handoff

Displays only data for "total handoffs" counters. This is based on the "sess-ttlhandoff" statistic in the system schema.

rejected

Displays only data for "total calls rejected" counters. This is based on the "sess-ttlrejected" statistic in the system schema.

renewal

Displays only data for "total renewal" counters. This is based on the "sess-ttlrenewal" statistic in the system schema.

| { grep grep_options | more }

Pipes (sends) the output of this command to the specified command. You must specify a command to which the output of this command will be sent.

For details on the usage of grep and more , refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Output Options

Access Technology Categories

Displays the Packet Control Function (PCF) summary which include the number of calls, call types, and Tx/Rx packets/octets statistics.

call-types

Displays the number of calls and the types of calls.

data

Displays the number of successful calls and Tx/Rx packets/octets statistics.

pcf pcf_address

Displays the given PCF summary for a particular address.

wf1

Displays the PCF summary in a single very wide line.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays a list of the reasons for call disconnects and the number of calls disconnected for each reason.

buckets

Displays additional disconnect reasons in pre-configured bucket-intervals.

gprs-only

Only supported on the SGSN.

This keyword limits the display to session disconnect reasons for the SGSN's 2G MM and PDP context disconnects.

pgw-only

Supported on the GGSN, P-GW, and SAEGW only.

Displays cumulative session disconnect reason statistics specific to P-GW/GGSN calls. The following call types fall under this category:

• P-GW Call

• GGSN Call (both standalone GGSN service as well as GGSN service associated with P-GW service)

• SAEGW Call (P-GW-Anchored)

• SAEGW Call (GGSN-Anchored)

• SAEGW Call (Co-located)

sgw-only

Supported on the SAEGW and S-GW only.

Displays cumulative session disconnect reason statistics specific to S-GW calls. S-GW calls include:

• S-GW calls

• SAEGW calls that are S-GW anchored only

sgsn-only

Only supported on the SGSN.

Displays session disconnect reasons for the SGSN's 3G MM and PDP context disconnects.

verbose

List all disconnect reasons even if the values are zero (0).

Important

The verbose option is not supported for the buckets keyword.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays session duration information for the current context filtered by the options specified.

session_filter

Important

If no PCF address or PDSN service is specified, the session information for all sessions is displayed.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays session progress information for the current context filtered by the options specified.

apn apn_name

Displays session information for an existing Access Point Name (APN) specified as an alphanumeric string of 1 through 62 characters that is case sensitive.

asn-peer-address ip_address

Displays session information for the Access Service Network-Gateway (ASN-GW) peer specified by its IP address in IPv4 dotted-decimal notation.

asngw-service service_name

Displays session information for an existing ASN-GW service specified as an alphanumeric string of 1 through 63 characters that is case sensitive.

asnpc-service service_name

Displays session information for an existing Access Service Network Paging Controller (ASN PC) service specified as an alphanumeric string of 1 through 63 characters that is case sensitive.

asnpc-peer-address ip_address

Displays session information for the ASN PC peer specified by its IP address in iIPv4 dotted-decimal notation.

dhcp-server dhcp_address

Displays session information for a Dynamic Host Configuration Protocol (DHCP) server specified by its IP address in IPv4 dotted-decimal notation

epdg-service service_name

Displays session information for an existing Evolved Packet Data Gateway (ePDG) service specified as an alphanumeric string of 1 through 63 characters that is case sensitive.

fa fa_address

Displays session information for the foreign agent (FA) whose IP address is specified in IPv4 dotted-decimal notation.

fa-service fa_name

Displays session information for an existing FA service specified as an alphanumeric string of 1 through 63 characters that is case sensitive.

ggsn-service ggsn_name

Displays session information for an existing Gateway GPRS Support Node (GGSN) service specified as an alphanumeric string of 1 through 63 characters that is case sensitive.

ha ha_address | ha-service

Displays session information for the home agent specified by its IP address in IPv4 dotted-decimal notation.

ha-service ha_name

Displays session information for an existing Home Agent (HA) service specified as an alphanumeric string of 1 through 63 characters that is case sensitive.

hsgw-servie service_name

Displays session information for an existing HRPD Serving Gateway (HSGW) service specified as an alphanumeric string of 1 through 63 characters that is case sensitive.

lma-service service_name

Displays session information for an existing Local Mobility Anchor (LMA) service specified as an alphanumeric string of 1 through 63 characters.

mag-service service_name

Displays session information for an existing Mobile Access Gateway (MAG) service specified as an alphanumeric string of 1 through 63 characters.

mipv6ha-service-service service_name

Displays session information for an existing Mobile Internet Protocol version 6 (MIPv6) Home Agent (HA) service specified as an alphanumeric string of 1 through 63 characters.

mme-address mme_address

Displays session progress information for the Mobility Management Entity (MME) specified by its IP address in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal notation.

pcc-service service_name

Displays session information for an existing Policy Charging Control (PCC) service specified as an alphanumeric string of 1 through 63 characters.

pcf pcf_address

Displays session information for the Packet Control Function (PCF) specified by its IP address in IPv4 dotted-decimal notation.

pdif-service service_name

Displays session information for an existing Packet Data Interworking Function (PDIF) service specified as an alphanumeric string of 1 through 63 characters.

pdsn-service service_name

Displays session information for an existing Packet Data Serving Node (PDSN) service specified as an alphanumeric string of 1 through 63 characters.

pgw-address ip_address

Displays session progress information for the PDN-Gateway (P-GW) specified by its IP address in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal notation.

saegw-service service_name

Displays session information for an existing System Architecture Evolution-Gateway (SAE-GW) service specified as an alphanumeric string of 1 through 63 characters.

samog-service service_name

Displays session progress information for an existing S2a Mobility over GTP (SaMOG) service specified as an alphanumeric string of 1 through 63 characters.

sgsn-address sgsn_address

Displays session information for the Serving GPRS Support Node (SGSN) specified by its IP address in IPv4 dotted-decimal notation.

sgw-service service_name

Displays session progress information for an existing Serving Gateway (S-GW) service specified as an alphanumeric string of 1 through 63 characters.

wsg-service service_name

Displays session progress information for an existing Wireless Security Gateway (WSG) service specified as an alphanumeric string of 1 through 63 characters.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays session recovery status information for the current context filtered by the options specified.

recovery status

Displays the current status of the system's ability to recover from a hardware or software fault that requires the recovery of home agent-based Mobile IP session(s).

verbose

Includes per-CPU Session Recovery status.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays session setup time information for all sessions or sessions associated with the specified Access Gateway (AGW).

[ epdg-only [ verbose ] hnbgw-only | mme-only | pcf pcf_address | gprs-only | sgsn-address sgsn_address | sgsn-only ]

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays session information for system subsystems. If no keywords are specified, information for all subsystems is displayed.

[ full | facility facility [ all | instance id ] ]

verbose

Displays everything the show session subsystem command displays with the exception that the Setup Time statistics are reported in 100 millisecond increments from 100 ms up to 9600 ms.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays status and statistics for the session trace application.

statistics

Displays summary statistics for the session trace subsystem.

subscriber network-element { ggsn | mme | pgw | sgw } trace-ref value

Displays status and statistics for a specified session trace using the network element type; GGSN, MME, P-GW, and S-GW, and a valid trace reference of 12 characters.

tce-address ip_address tce-index num

Displays status and statistics for an existing Trace Collection Entity (TCE) connection specified by its IP address in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal notation.

tce-index num : Specifies a TCE index of the trace collection entity as an integer from 0 through 7.

tce-summary

Displays a summary of all active TCE connections.

trace-summary

Displays a summary of all active session traces.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays session event module statistics and file space usage information.

file-space-usage

Displays session event module file storage limits and capacities.

statistics

Displays session event module statistics regarding the handling and transfer of event records to an external collection server.

Displays switch fabric task (SFT) information associated with packet processing cards.

historical

Displays historical information regarding SFT performance.

Displays information and statistics about Visitor Location Register (VLR) SGs interface services configured on this system.

all

Displays information about all SGs interface services configured on this system.

name name

Displays information about an existing SGs service specified as an alphanumeric string of 1 through 63 characters.

offload-status sgs_svc_name

Displays statistics for all VLRs flagged for offload for an existing SGs service specified as an alphanumeric string of 1 through 63 characters.

statistics { all | name name }

Displays statistics for SGs services configured on this system.

all : Displays statistics for all SGs services configured on this system.

name name : Displays statistics for an existing SGs service specified as an alphanumeric string of 1 through 63 characters.

vlr-status [ service-name name ] [ vlr-name name ] [ full [ wf1 ] ]

Displays status information about VLRs configured in SGs services on this system.

service-name sgs_svc_name : Displays names and states of VLRs configured in an existing SGs service specified as an alphanumeric string of 1 through 63 characters.

vlr-name name : Displays the name and state of an existing VLR configured in SGs services on this system and specified as an alphanumeric string of 1 through 63 characters.

full : Displays additional information about VLRs configured in SGs services on this system. Additional information includes ports, addresses and peer IDs.

wf1 : Displays the output in a tabular format.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays statistics related to S4 functionality on the SGSN.

all

Show all S4-SGSN statistics from all session managers.

smgr-instance

Show the statistics for a session manager instance of the SGSN service. <instance_number> must be specified as an integer between 1 and 65535.

Important

If no option is specified, then S4-SGSN statistics from all session managers will be added up and the cumulative totals will be shown.

The output of this command provides information on 3G SGSN (both Gn and S4) application FSM statistics.

umts-sm

Displays 3G Session Management Access Side FSM statistics.

umts-pmm

Displays 3G Mobility Management PMM FSM statistics.

all

Displays all SGSN application FSM statistics.

Displays session manager (SessMGR) statistics specific to the SGSN service.

all

Displays all SessMGR statistics specific to the system's SGSN services.

instance smgr_inst

Displays the statistics for a session manager instance of the SGSN service specified as an integer between 1 and 10000000.

Displays information related to SGSN fast-path.

all

Displays fast-path statistics for all session managers.

smgr-instance smgr_inst

For releases prior to 14.0, this keyword displays the fast-path statistics for a session manager instance specified as an integer between 1 and 65535.

For releases 14.0 and higher, this keyword displays the fast-path statistics for a session manager instance specified as an integer between 1 and 384.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays collected statistics for the SGSN Mobile Application Part (MAP).

all

Displays collected statistics for the SGSN MAP application.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays the SGSN global configuration.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

This command has been deprecated. Refer to the show operator-policy command.

Displays collected pooling statistics for either GPRS services or SGSN services.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays information about the configured SGSN services in the current context.

all

Displays information for all SGSN services in the current context.

name srvc_name

Displays information for an existing SGSN service specified as an alphanumeric string of 1 through 63 characters.

Displays information about the configured GPRS Tunnelling Protocol (SGTP) services in the current context, including GTP-C and GTP-U operational configuration.

all [ gtpu-table ]

Displays configuration information for all of the SGTP services defined for the current context.

gtpu-table : Limits the output to GTPU information for all SGTP services.

ggsn-table [ smgr-instance srvc_name ]

Displays GGSN information configured for the SGTP service(s) in the current context.

smgr-instance srvc_name enter an integer from 1 through 384 to limit the GGSN output to information for a specific session manager.

mbms-bearers

This keyword is specific to the SGSN and is not yet supported.

name srvc_name [ gtpu-table ]

Displays information for the specified SGTP service in the current context. srvc_name must be an alphanumeric string of 1 through 63 characters that identifies a configured SGTP service.

gtpu-table : Limits the output to GTPU information for a specific SGTP service.

sgsn-table

Displays SGSN information configured for the SGTP service(s) in the current context.

Displays all statistics, for SGSN GPRS Tunnelling Protocol (SGTP) interface parameters, collected since the last restart or last use of a clear command.

all

Displays configuration information for all of the SGTP services defined for the current context.

gsn-address ipv4_address

Displays statistics for an SGSN specified by its IP address in IPv4 dotted-decimal notation. This must be an existing and active interface.

sgtp-service sgtp_srvc_name

Displays statistics for an existing SGTP service specified as an alphanumeric string from 1 through 63 characters.

verbose

Causes the system to displays more detailed level of statistics.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays all transmission and reception statistics for pre-defined and active GTP-U interfaces collected since the last restart or last use of a clear command.

ggsn-address ipv4_address

Displays statistics for the GGSN specified by its IP address in IPv4 dotted-decimal notation.

gprs-service gprs_srvc_name nsei nse_id

Displays NSEI-based GTPU statistics associated with an existing GPRS service specified as an alphanumeric string of 1 through 63 characters.

nsei nse_id : Specifies a GPRS NSEI as an integer from 0 through 65535.

iups-bind-address ipv4_address

Displays SGSN GPRS Tunnelling Protocol (SGTP) statistics for an Iu GTPU interface specified by its IP address in IPv4 dotted-decimal notation.

iups-service iups_srvc_name

Displays statistics for an existing IuPS service specified as an alphanumeric string of 1 through 63 characters.

recovered-values

Only displays recovered values for key KPI counters that were backed-up.

rnc-address ipv4_address

Displays statistics for a Radio Network Controller (RNC) identified by its IP address in IPv4 dotted-decimal notation.

sgtp-service sgtp_srvc_name

Displays statistics for an existing SGTP service specified as an alphanumeric string of 1 through 63 characters.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays configuration settings and/or service statistics for Serving Gateway (S-GW) services on this system.

all

Displays configuration information for all S-GW services configured on this system.

name service_name

Displays configuration information for an existing S-GW service c specified as an alphanumeric string of 1 through 63 characters.

statistics { all | name service_name }

all : Displays statistics for all S-GW services on this system or for a specified service.

name service_name : Displays statistics for an existing S-GW service specified as an alphanumeric string of 1 through 63 characters.

rac rac

Specifies the Routing Area Code per 3GPP standards in TS 29.274. This will provide statistics for the SGW service associated with this rac .

This entry must be an integer from 0 to 65535.

There is no default setting.

tac tac

Specifies the Tracking Area Code per 3GPP standards in TS 29.274. This will provide statistics for the SGW service that is associated with this tac .

This entry must be an integer from 0 to 65535.

There is no default setting.

apn apn_name

Specifies a configured APN name that is associated with the specified SGW service.

This entry must be an alphanumeric string of 1 to 62 characters. This will provide statistics for the SGW service associated with this apn .

There is no default setting.

| { grep grep_options | more }

Indicates the output of the command is to be piped (sent) to the command specified.

A command to send output to must be specified.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section in the Command Line Interface Overview chapter.

Displays information and statistics about SLs interface services configured on this system.

all

Displays information about all SLs interface services configured on this system.

name svc_name

Displays information about an existing SLs service specified as an alphanumeric string of 1 through 63 characters.

peers [ all | esmlc-id esmlc-id ]

Displays configuration information of the E-SMLC peers that are connected to the SLs service.

all : Displays statistics for all E-SMLC peers.

esmlc-id esmlc-id : Displays statistics for an existing E-SMLC peer specified as an integer value from 0 through 255.

statistics [ name svc_name [ sls | sctp ] ] [ sls | sctp ] [ esmlc-id esmlc-id ]

Displays all statistics for SLs services configured on this system.

name name : Displays all statistics for an existing SLs service specified as an alphanumeric string of 1 through 63 characters.

sls : Filters output to show only SLs interface related statistics.

sctp : Filters output to show only SCTP related statistics.

esmlc-id esmlc-id : Displays all statistics for an existing E-SMLC peer specified as an integer value from 0 through 255.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays traffic statistics for the Short Message Service (SMS).

gprs-only

Displays only GPRS access type SMS statistics.

name map_srvc

Displays statistics for an existing MAP service specified as an alphanumeric string of 1 through 63 characters.

recovered-values

Only displays recovered values for key KPI counters that were backed-up.

sgsn-only

Displays only UMTS access type SMS statistics.

verbose

Causes the system to displays more detailed level of statistics.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays statistics for the packet traffic going through the Subnetwork Dependent Convergence Protocol (SNDCP) layer.

gprs-service srvc_name

Displays statistics for an existing GPRS service specified as an alphanumeric string of 1 through 63 characters.

verbose

Displays a more detailed level of statistics.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays information on the Simple Network Management Protocol (SNMP) servers and interfaces.

accesses

Displays SNMP server usage statistics.

communities

Displays SNMP community strings.

notifies

Displays SNMP event trap and notification statistics.

server

Displays SNMP server configuration information.

transports

Displays trap destination configuration information.

trap { history [ url | varbind | verbose ] | statistics [ verbose | wide ] }

history : Displays SNMP event trap history. trap history Displays up to 5,000 time-stamped trap records stored in a buffer. The buffer may be cleared by entering the clear snmp history command.

statistics : Displays SNMP event trap and notification statistics.

url pathname : Redirects output to a file.

varbind : Displays varbind-based output which is easier to parse, but harder for an operator to read.

verbose : Displays rows for every defined trap, even if never generated.

wide : Displays trap statistical data in excess of 80 columns.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays information regarding the authenticity of the software.

file url [ validate ]

Displays authenticity information for a specified file.

url specifies the pathname for the file for which authentication information will be displayed as one of the following:

[file:]{/flash | /usb1 | /hd-raid | /sftp}[/directory]/ filename 

tftp://host[:port][/directory]/filename 

ftp://[username[:password]@]host[:port][/directory]/filename 

sftp://[username[:password]@]host[:port][/directory]/filename 

http://[username[:password]@]host[:port][/directory]/filename 

directory is the directory name.

filename is the actual file of interest.

username is the user to be authenticated.

password is the password to use for authentication.

host is the IP address or host name of the server.

port# is the logical port number that the communication protocol is to use.

file url [ validate ]

Displays authenticity information for starfile images on flash or over the network. The validate option performs digital signature validation of the image.

keys

Displays public StarOS key information for each of the key storage regions (Primary, Backup), as well as Rollover key information.

running

Displays information about the chain of trust for all running software images: StarOS, CFE (bootstrap), BIOS/UEFI (Unified Extensible Firmware Interface) and the microloader.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays the Service Redundancy Protocol (SRP) information.

audit-statistics [ all | instance number ] [ message-level | session-level ]

Displays statistics of external audit.

all : Displays information for all Session Managers.

instance number : Displays information for an instance number of Session Manager.specified as an integer from 1 through 4294967295.

message-level : Displays message-level statistics.

session-level : Displays session-level statistics.

call-loss statistics

Displays history of lost calls during switchover.

checkpoint { info | statistics [ active | standby ] [ verbose ]

The info keyword displays a list of micro-checkpoints by CMD ID, name along with associated status information.

The statistics keyword displays check pointing statistics on session redundancy data (session managers, current call recovery records, etc.).

active : Displays information for the active chassis.

standby : Displays information for the standby chassis.

verbose : Displays cumulative information for all session managers in tabular output.

details

Displays detailed information and statistics required by TAC personnel for ICSR/SRP troubleshooting.

info

Displays Service Redundancy Protocol information (context, chassis state, peer, connection state, etc.).

monitor [ all | authentication-probe | bfd | bgp | diameter ]

Displays SRP monitor information.

all : Displays monitor information for all types (authentication-probe, bgp, and diameter).

authentication-probe : Displays authentication probe monitor information.

bfd : Displays BFD monitor information.

bgp : Displays BGP monitor information.

diameter : Displays Diameter monitor information.

statistics

Displays SRP statistics (hello messages sent, configuration validation, resource messages, switchovers, etc.).

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

This command displays the configuration information for the defined Signalling System #7 (SS7) routing domains. Since SS7 routing domains encompass a large number of operational parameters, this command enables you to narrow your displays to specific protocol parameters on a specific link.

ss7-routing-domain { all | ss7rd_id }

all : Displays information for all SS7 routing domains.

ss7rd_id : Displays information for the SS7 routing domain ID specified as an integer from 1 through 12.

m3ua

Displays statistics and status information for the SS7 MTP3 User Adaptation Layer (M3UA) in the specified SS7 routing domain.

mtp2

Displays statistics and status information for the SS7 Message Transfer Part-2 (MTP2) in the specified SS7 routing domain.

mtp3

Displays statistics and status information for the SS7 Message Transfer Part-3 (MTP3) in the specified SS7 routing domain.

qsaal

Displays statistics and status information for the Service Specific Connection-Oriented Protocol (SSCOP) sub-layer of the Quasi Signaling Application Adaptation Layer (QSAAL) in the specified SS7 routing domain.

routes [ adjacent ]

Displays the destination point code (DPC) routing table.

adjacent : If this keyword is used with the routes keyword, access is provided to the statistics and status information for configured adjacent point codes.

sctp asp { all | instance asp_id }

sscf

Displays statistics and status information for the Service Specific Coordination Function (SSCF [q.2140]) in the specified SS7 routing domain.

peer-server [ all | id peer-server_id ]

peer-server-process [ all | instance instance_id ]

destination-point-code [ all | dest_point_code ]

gen

Displays general information for the specific protocol in the specified SS7 routing domain.

verbose

Enables the display of maximum information for a protocol.

linkset [ all | id linkset_id ]

link [ all | id link_id ]

Displays the secure shell (SSH) host or client authentication public key information.

type { v1-rsa | v2-dsa | v2-rsa }

Specifies the type of SSH key information to display. If type is not specified, information for all types is displayed.

v1-rsa : SSH v1 RSA host key only (obsolete)

v2-dsa : SSH v2 DSA host key only

v2-rsa : SSH v2 RSA host or client key only

Displays information related to Secure Sockets Layer (SSL) cipher suites since the last restart or clear command. A cipher suite contains the cryptographic algorithms supported by the client.

name name

Displays information related to the SSL cipher suite specified as an alphanumeric string of 1 through 127 characters.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays information pertaining to Secure Sockets Layer (SSL) connections on the Proxy Call Session Control Function (P-CSCF).

list

Lists the SSL connections on the P-CSCF.

summary

Displays state and statistical information for the SSL connections on the P-CSCF.

service-name name

Lists the SSL connections on the P-CSCF for the specified P-CSCF service, or displays state and statistical information for the SSL connections on the P-CSCF for the specified P-CSCF service.

name must be an alphanumeric string of 1 through 63 characters.

name name

Displays state and statistical information for the SSL connection specified as an alphanumeric string of 1 through 127 characters.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays information related to configured Secure Sockets Layer (SSL) maps/templates since the last restart or clear command.

map-type ssl-subscriber-template

Displays information related to configured SSL maps/templates for the SSL map/template type ssl-subscriber-template.

name name

Displays information related to configured SSL maps/templates for the map/template name specified as n alphanumeric string of 1 through 127 characters.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays statistics for Secure Sockets Layer (SSL) since the last restart or clear command.

service-name name

Displays SSL statistics for the Proxy Call Session Control Function (P-CSCF) service. specified as an alphanumeric string of 1 through 127 characters.

| { grep grep_options | more }

Pipes (sends) the output of the command to the command specified. You must specify a command to which the output will be sent.

For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section of the Command Line Interface Overview chapter.

Displays information for subscriber sessions that are defined by specified keywords. Command keywords are base commands that display distinctive types of data. Filter keywords are a superset of command keywords that modify or filter the output of the base commands.

command_keyword

The following keywords are base commands that each have a distinct display output. Only one command keyword can be entered on the command line.

aaa-configuration

active, active-charging -service, all, apn, asn-peer-address, asngw-service, asnpc-service, bandwidth-policy, bearer-establishment, bng-service, callid, card-num, cbb-policy, ccoa-only, configured-idle-timeout, connected-time, dhcp-server, dormant, ebi, enodeb-address, epdg-address, epdg-service, fa, fa-service, firewall, fw-and-nat, ggsn-service, gprs-service, gsm-traffic-class, gtp-version, gtpu-bind-address, gtpu-service, ha, ha-ipsec-only, ha-service, henbgw-access-service,  hnbgw-only, hsgw-service, idle-time, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-address, l3-tunnel-remote-address, lac, lac-service, lma-service, lns, lns-service, long-duration-time-left, mag-service, mip-udp-tunnel-only, mipv6ha-service, mme-address, mme-service, msid, nemo-only network-requested, network-type, pcf, pdg-service, pdif-service, pdsn-service, pgw-address, plmn-type, profile-id, profile-name, qci, rx-data, s1u-state, s5-proto, session-time-left, sgsn-address, sgsn-service, sgw-address, sgw-service, tx-data, username, verbose, grep, more 

access-flows { accounting | dynamic | pre-provisioned | static }

active, active-charging-service, all, apn, asn-peer-address, asngw-service, asnpc-service, callid, card-num, ccoa-only, configured-idle-timeout, connected-time, dhcp-server, dormant, epdg-address, epdg-service, fa, fa-service, flow-type, ggsn-service, gprs-service, gsm-traffic-class, ha, ha-ipsec-only, ha-service, henbgw-access-service, hnbgw-only, hsgw-service, idle-time, imsi, ip-address, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-address, l3-tunnel-remote-address, lac, lac-service, lma-service, lns, lns-service, long-duration-time-left, mag-service, mip-udp-tunnel-only, mme-address, mme-service, msid, msisdn, network-requested, network-type, pcf, pdg-service, pdif-service, pdsn-service, pdsnclosedrp-service, pgw-address, plmn-type, rulebase, rx-data, session-time-left, sgsn-address, sgsn-service, sgw-address, sgw-service, tpo, tx-data, username, verbose, grep, more 

access-type { lxcdma | ehrpd | lte | undetemrined | wcdma | wifi | wired }

access-type, bearer-establishment, bng-service, callid, card-num, configured-idle-timeout, domain, ebi, enodeb-address, fa, firewall, fw-and-nat, gtp-version, gtpu-bind-address, gtpu-service, ha, hnbgw-service, idle-time, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-addr, l3-tunnel-remote-addr, long-duration-time-left, mipv6ha-service, msid, nat, network-type, profile-id, profile-name, qci, rx-data, s1u-state, security-type, session-time-left, sgw-address, smgr-instance, tx-data, ue-type, username, grep, more 

active

Displays active subscribers. When no Filter Keywords are specified, the output is a summary of all active subscribers. When Filter Keywords are specified, the percentage is displayed as graphs in which one is displayed using a high sampling rate, a 10-second interval between samples, and a low sampling rate, a 15-minute interval between samples.

apn, asn-peer-address, asngw-service, asnpc-service, bearer-establishment, bng-service, callid, card-num, ccoa-only, configured-idle-timeout, connected-time, dhcp-server, ebi, epdg-address, epdg-service, fa, fa-service, firewall, fw-and-nat, ggsn-service, gprs-service, gsm-traffic-class, gtp-version, gtpu-bind-address, gtpu-service, ha, ha-ipsec-only, ha-service, henbgw-access-service, hsgw-service, idle-time, imei, ims-auth-service, imsi, ip-address, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-addr, l3-tunnel-remote-addr, lac, lac-service, lma-service, lns, lns-service, long-duration-time-left, mag-service, mme-address, mme-service, msid, msisdn, nat, nemo-only, network-requested, pcf, pdg-service, pdif-service, pdsn-service, pdsnclosedrp-service, pgw-address, plmn-type, profile-id, profile-name, qci, rx-data, s1u-state, session-time-left, sgsn-address, sgsn-service, smgr-instance, sgw-address, sgw-service, tpo, tx-data, username, grep, more 

active-charging-service acs_service

Displays information for subscribers being processed by the active charging service specified as an alphanumeric string of 1 through 15 characters.

active-charging-service, bandwidth-policy, bearer-establishment, bng-service, callid, card-num, cbb-policy, configured-idle-timeout, connected-time, ebi, enodeb-address, epdg-address, epdg-service,  fa, firewall, fw-and-nat, gtp-version, gtpu-bind-address, gtpu-service, ha, idle-time, ims-auth-service, imsi, ip-address, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-address, l3-tunnel-remote-address, long-duration-time-left, mag-service, mipv6ha-service, msid, nat, network-type, profile-id, profile-name, qci, rulebase, rx-data, s1u-state, s5-proto, session-time-left, sgw-address, smgr-instance, tx-data, username, grep, more 

activity

Displays subscriber link activity percentage. When no Filter Keywords are specified, the output is a summary of all subscriber activity. When Filter Keywords are specified, the link activity percentage is displayed as graphs in which one is displayed using a high sampling rate, a 10-second interval between samples, and a low sampling rate, a 15-minute interval between samples.

active, all, apn, asn-peer-address, asngw-service, asnpc-service, bearer-establishment, bng-service, callid, card-num, ccoa-only, configured-idle-timeout, connected-time, dhcp-server, dormant, ebi, enodeb-address, epdg-address, epdg-service, fa, fa-service, firewall, fw-and-nat, ggsn-service, gprs-service, gsm-traffic-class, gtp-version, gtp-version, gtpu-bind-address, gtpu-service, ha, ha-ipsec-only, ha-service, henbgw-access-service, hsgw-service, idle-time, imei, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-addr, l3-tunnel-remote-addr, lac, lac-service, lma-service, lns, lns-service, long-duration-time-left, mag-service, mme-address, mme-service, msid, msisdn, nat, nemo-only, network-requested, pcf, pdg-service, pdif-service, pdsn-service, pdsnclosedrp-service, pgw-address, plmn-type, profile-id, profile-name, qci, rx-data, session-time-left, sgsn-address, sgsn-service, sgw-address, sgw-service, smgr-instance, tpo, tx-data, username, grep, more 

all ip_address

Displays all current subscribers who have either active or dormant sessions.

apn apn_string

Displays subscribers currently facilitated by the Access Point name (APN) configured on the SGSN or GGSN.

active-charging-service, apn, bandwidth-policy, bearer-establishment, bng-service, callid, card-num, cbb-policy, ccoa-only, configured-idle-timeout, connected-time, dhcp-server, dormant, ebi, enodeb-address, epdg-address, epdg-service, fa, fa-service, firewall, fw-and-nat, ggsn-service, gprs-service, gsm-traffic-class, gtp-version, gtpu-bind-address, gtpu-service, ha, ha-ipsec-only, ha-service, idle-time, imei, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-address, l3-tunnel-remote-address, lac, lac-service, lma-service, lns, lns-service, long-duration-time-left, mip-udp-tunnel-only, mipv6ha-service, msid, nat, nemo-only network-requested, network-type, pcf, pdsn-service, plmn-type, profile-id, profile-name, qci, rulename <rule_name>, rx-data, s1u-state, s5-proto, session-time-left, sgsn-address, sgsn-service, sgw-address, smgr-instance, without-dynamic-rule, without-override-control, tx-data, username, verbose, grep, more 

asn-peer-address ip_address

Displays information for subscribers on an ASN-GW trusted peer.

ip_address is the IP address of the ASN-GW peer server expressed in IPv4 dotted-decimal notation.

asn-peer-address, asngw-service, bearer-establishment, bng-service, callid, card-num, configured-idle-timeout, connected-time, ebi, enodeb-address, fa, fa-service, firewall, full, fw-and-nat, gtp-version, gtpu-bind-address, gtpu-service, ha, idle-time, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-address, l3-tunnel-remote-address, long-duration-time-left, mipv6ha-service, msid, nat, network-type, profile-id, profile-name, qci, rx-data, s1u-state, s5-proto, session-time-left, sgw-address, smgr-instance, tx-data, username, grep, more 

asngw-only service_name

Displays ASN-GW specific context information for the session.

aaa-configuration, access-flows, active, activity, all, asn-peer-address, asngw-service, bearer-establishment, bng-service, callid, card-num, configured-idle-timeout, connected-time, counters, data-rate, dormant, ebi, enodeb-address, fa, fa-service, firewall, full, fw-and-nat, gtp-version, gtpu-bind-address, gtpu-service, ha, idle-time, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-address, l3-tunnel-remote-address, long-duration-time-left, mipv6ha-service, msid, nat, network-type, policy, profile-id, profile-name, qci, rx-data, s1u-state, s5-proto, session-time-left, sgw-address, smgr-instance, subscription, summary, tft, tx-data, username, wf1, grep, more 

asngw-service service_name

Displays counters for subscribers accessing the ASN-GW service.

service_name must be an existing service and be from 1 to 63 alphanumeric characters.

asn-peer-address, asngw-service, bearer-establishment, bng-service, callid, card-num, configured-idle-timeout, connected-time, ebi, enodeb-address, fa, fa-service, firewall, full, fw-and-nat, gtp-version, gtpu-bind-address, gtpu-service, ha, idle-time, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-address, l3-tunnel-remote-address, long-duration-time-left, mipv6ha-service, msid, nat, network-type, profile-id, profile-name, qci, rx-data, s1u-state, s5-proto, session-time-left, sgw-address, smgr-instance, tx-data, username, grep, more 

asnpc-service service_name

Displays counters for subscribers accessing the ASN Paging Controller and Location Registry service.

service_name must be an existing Access Service Network Paging Controller (ASN PC) service and be from 1 to 63 alphanumeric characters.

all, counters all, full, summary, grep, more 

bandwidth-policy policy_name

Show information for subscribers associated with the specified Active Charging bandwidth policy. Must be followed by the name of an existing bandwidth policy specified as an alphanumeric string of 1 trough 63 characters.

access-type, active-charging-service, bandwidth-policy, bearer-establishment, bng-service, callid, card-num, cbb-policy, configured-idle-timeout, connected-time, domain, ebi, enodeb-address, epdg-address, epdg-service, fa, firewall, fw-and-nat, gtp-version, gtpu-bind-address, gtpu-service, ha, hnbgw-service, hsgw-service, idle-time, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-addr, l3-tunnel-remote-addr, lma-service, long-duration-time-left, mag-service, mipv6ha-service, msid, nat, network-type, profile-id, profile-name, qci, rulebase, rx-data, s1u-state, security-type, session-time-left, sgw-address, smgr-instance, tx-data, ue-type, username, grep, more 

bearer-establishment { direct-tunnel | normal | pending }

apn, asn-peer-address, asngw-service, asnpc-service, bearer-establishment, bng-service, callid, card-num, ccoa-only, configured-idle-timeout, connected-time, css-delivery-sequence, css-service, dhcp-server, ebi, enodeb-address, epdg-address, epdg-service, fa, fa-service, firewall, fw-and-nat, ggsn-service, gprs-service, gsm-traffic-class, gtp-version, gtpu-bind-address, gtpu-service, ha, ha-ipsec-only, ha-service, henbgw-access-service, hsgw-service, idle-time, imei, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-addr, l3-tunnel-remote-addr, lac, lac-service, lma-service, lns, lns-service, long-duration-time-left, mag-service, mip-udp-tunnel-only, mipv6ha-service, mme-address, mme-service, msid, msisdn, nat, nemo-only, network-requested, network-type, pcf, pdg-service, pdif-service, pdsn-service, pdsnclosedrp-service, pgw-address, plmn-type, rx-data, s1u-state, s5-proto, session-time-left, sgsn-address, sgsn-service, sgw-address, sgw-service, smgr-instance, tx-data, username, grep, more 

bng-service srvc_name

active, all, apn, asn-peer-address, asngw-service, asnpc-service, bearer-establishment, bng-service, callid, card-num, ccoa-only, configured-idle-timeout, connected-time, dhcp-server, dormant, ebi, enodeb-address, epdg-address, epdg-service, fa, fa-service, firewall, fw-and-nat, ggsn-service, gprs-service, gsm-traffic-class, gtp-version, gtp-version, gtpu-bind-address, gtpu-service, ha, ha-ipsec-only, ha-service, henbgw-access-service, hsgw-service, idle-time, imei, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-addr, l3-tunnel-remote-addr, lac, lac-service, lma-service, lns, lns-service, long-duration-time-left, mag-service, mme-address, mme-service, msid, msisdn, nat, nemo-only, network-requested, pcf, pdg-service, pdif-service, pdsn-service, pdsnclosedrp-service, pgw-address, plmn-type, profile-id, profile-name, qci, rx-data, session-time-left, sgsn-address, sgsn-service, sgw-address, sgw-service, smgr-instance, tpo, tx-data, username, grep, more 

callid id

Displays subscriber information for the call ID specified as an 8-byte hexadecimal number.

adc, apn, asn-peer-address, asngw-service, asnpc-service, bearer-establishment, bng-service, callid, card-num, ccoa-only, configured-idle-timeout, connected-time, css-delivery-sequence, css-service, dhcp-server, ebi, enodeb-address, epdg-address, epdg-service, fa, fa-service, firewall, fw-and-nat, ggsn-service, gprs-service, gsm-traffic-class, gtp-version, gtpu-bind-address, gtpu-service, ha, ha-ipsec-only, ha-service, henbgw-access-service, hsgw-service, idle-time, imei, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-addr, l3-tunnel-remote-addr, lac, lac-service, lma-service, lns, lns-service, long-duration-time-left, mag-service, mip-udp-tunnel-only, mipv6ha-service, mme-address, mme-service, msid, msisdn, nat, nemo-only, network-requested, network-type, pcf, pdg-service, pdif-service, pdsn-service, pdsnclosedrp-service, pgw-address, plmn-type, rx-data, s1u-state, s5-proto, session-time-left, sgsn-address, sgsn-service, sgw-address, sgw-service, smgr-instance, tx-data, username, grep, more 

card-num card_num

The slot number of the processing card by which the subscriber session is processed. The slot number is an integer from 1 through 7 and 10 through 16 on the ASR 5000, or 1 through 4 and 7 through 10 on the ASR 5500.

apn, asn-peer-address, asngw-service, asnpc-service, bearer-establishment, bng-service, callid, card-num, ccoa-only, configured-idle-timeout, connected-time, cpu-num, css-delivery-sequence, css-service, dhcp-server, ebi, enodeb-address, epdg-address, epdg-service, fa, fa-service, firewall, fw-and-nat, ggsn-service, gprs-service, gsm-traffic-class, gtp-version, gtpu-bind-address, gtpu-service, ha, ha-ipsec-only, ha-service, henbgw-access-service, hsgw-service, idle-time, imei, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-addr, l3-tunnel-remote-addr, lac, lac-service, lma-service, lns, lns-service, long-duration-time-left, mag-service, mip-udp-tunnel-only, mipv6ha-service, mme-address, mme-service, msid, msisdn, nat, nemo-only, network-requested, network-type, pcf, pdg-service, pdif-service, pdsn-service, pdsnclosedrp-service, pgw-address, plmn-type, rx-data, s1u-state, s5-proto, session-time-left, sgsn-address, sgsn-service, sgw-address, sgw-service, smgr-instance, tx-data, username, grep, more 

cbb-policy policy_name

Show information for subscribers associated with the specified Active Charging Content Based Billing (CBB) policy. Must be followed by the name of an existing Active Charging CBB policy specified as an alphanumeric string of 1 trough 63 characters.

active, active-charging -service, all, apn, bandwidth-policy, bearer-establishment, bng-service, callid, card-num, cbb-policy, ccoa-only, configured-idle-timeout, connected-time, dhcp-server, dormant, ebi, enodeb-address, epdg-address, epdg-service, fa, fa-service, firewall, fw-and-nat, ggsn-service, gsm-traffic-class, gtp-version, gtpu-bind-address, gtpu-service, ha, ha-ipsec-only, ha-service, hnbgw-only, hsgw-service, idle-time, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-address, l3-tunnel-remote-address, lac, lac-service, lma-service, lns, lns-service, long-duration-time-left, mag-service, mip-udp-tunnel-only, mipv6ha-service, msid, nemo-only network-requested, network-type, pcf, pdsn-service, plmn-type, profile-id, profile-name, qci, rx-data, s1u-state, s5-proto, session-time-left, sgsn-address, sgsn-service, tx-data, username, verbose, grep, more 

ccoa-only

access-type, active-charging-service, bandwidth-policy, bearer-establishment, bng-service, callid, card-num, cbb-policy, configured-idle-timeout, connected-time, domain, ebi, enodeb-address, epdg-address, epdg-service, fa, firewall, fw-and-nat, gtp-version, gtpu-bind-address, gtpu-service, ha, hnbgw-service, idle-time, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-addr, l3-tunnel-remote-addr, long-duration-time-left, mipv6ha-service, msid, nat, network-type, pcc-service, profile-id, profile-name, qci, rulebase, rx-data, s1u-state, s5-proto, security-type, session-time-left, sgsn-address, sgsn-service, sgw-address, smgr-instance, tpo, tx-data, username, grep, more 

configuration { all | username name }

Displays current configuration for all subscribers or a specified subscriber.

configured-idle-timeout [ < | > | greater-than | less-than ] value

congestion_mgmt { not-required | required }

Shows the current subscribers for which congestion management is not-required or required. The following filter keywords are valid with this command:

active-charging-service, apn, asn-peer-address, asngw-service, asnpc-service, bandwidth-policy, bearer-establishment, bng-service, callid, card-num, cbb-policy, configured-idle-timeout, congestion_mgmt, connected-time, ebi, enodeb-address, epdg-address,  epdg-service, fa, fa-service, firewall, fw-and-nat, gtp-version, gtpu-bind-address, gtpu-service, ha, ha-ipsec-only, ha-service, hnbgw-service, henbgw-access-service, hsgw-service, idle-time, ims-auth-service, imsi, interface-type, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-addr, l3-tunnel-remote-addr, lac-service, lma-service, lns, lns-service, long-duration-time-left, mag-service, mipv6ha-service, mme-address, mme-service, msid, nat, network-type, pcp, pgw-address, plmn-type, profile-id, profile-name, qci, rulebase, rx-data, s1u-state, s5-proto, saegw-service, session-time-left, sgw-address, sgw-service, smgr-instance, tpo, tx-data, username, wsg-service 

connected-time [ < | > | greater-than | less-than ] value

counters

access-type, active, active-charging-service, all, apn, asn-peer-address, asngw-service, asnpc-service, bandwidth-policy, bearer-establishment, bng-service, callid, card-num, cbb-policy, ccoa-only, configured-idle-timeout, connected-time, dhcp-server, dns-proxy, domain, dormant, ebi, enodeb-address, epdg-address, epdg-service, fa, fa-service, firewall, fw-and-nat, ggsn-service, gprs-service, gsm-traffic-class, gtp-version, gtpu-bind-address, gtpu-service, ha, ha-ipsec-only, ha-service, henbgw-access-service, hnbgw-service, hsgw-service, idle-time, imei, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-address, ipv6-prefix, l3-tunnel-local-addr, l3-tunnel-remote-addr, lac, lac-service, lma-service, lns, lns-service, long-duration-time-left, mag-service, mipv6ha-service, mme-address, mme-service, msid, msisdn, nat, nemo-only, network-requested, network-type, pcc-service, pcf, pdg-service, pdif-service, pdsn-service, pdsnclosedrp-service, pgw-address, plmn-type, profile-id, profile-name, qci, rulebase, rx-data, s1u-state, s5-proto, security-type, session-time-left, sgsn-address, sgsn-service, sgw-address, sgw-service, smgr-instance, tpo, tx-data, ue-type, username, grep, more 

css-delivery-sequence

Important

This is a restricted keyword. In StarOS 9.0 and later, this keyword is obsoleted.

css-service csssvc_name

Important

This is a restricted keyword. In StarOS 9.0 and later releases, this keyword is obsolete.

data-rate

Displays subscriber throughput data. This keyword is best used for individual subscriber output.

access-type, active, active-charging-service, all, apn, asn-peer-address, asngw-service, asnpc-service, bandwidth-policy, bearer-establishment, bng-service, callid, card-num, cbb-policy, ccoa-only, configured-idle-timeout, connected-time, dhcp-server, domain, dormant, ebi, enodeb-address, epdg-address, epdg-service, fa, fa-service, firewall, fw-and-nat, ggsn-service, gprs-service, graph, gsm-traffic-class, gtp-version, gtpu-bind-address, gtpu-service, ha, ha-ipsec-only, ha-service, henbgw-access-service, high, hnbgw-service, hsgw-only, hsgw-service, idle-time, imei, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, pv6-address, ipv6-prefix, l3-tunnel-local-addr, l3-tunnel-remote-addr, lac, lac-service, lma-service, lns, lns-service, long-duration-time-left, low, mag-service, mipv6ha-service, mme-address, mme-service, msid, msisdn, network-requested, network-type, pcc-service, pcf, pdg-service, pdif-service, pdsn-service, pdsnclosedrp-service, pgw-address, plmn-type, profile-id, profile-name, qci, rulebase, rx-data, s1u-state, s5-proto, security-type, session-time-left, sgsn-address, sgsn-service, sgw-address, sgw-service, smgr-instance, summary, tpo, tx-data, ue-type, username, verbose, grep, more