Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide, Cisco IOS XE Dublin 17.10.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book

Results

Updated:
November 30, 2022

Chapter: Client Limit

Client Limit

Information About Client Limit

This feature enforces a limit on the number of clients that can to be associated with an AP. Further, you can configure the number of clients that can be associated with each AP radio.

From Cisco IOS XE Cupertino 17.8.x onwards, client limiting is supported per AP, per radio, and per radio per WLAN.

Limitations for Client Limit

  • APs other than the Cisco Catalyst 9136 Series APs, support only 200 clients per radio. If you configure more than 200 clients for these APs, the number of clients that can be associated with the AP radios will still be limited to only 200 clients, as per the AP capability value.

  • Client limiting is supported on the Cisco Catalyst 9136 Series APs in Flex mode.

Configuring Client Limit Per WLAN (GUI)

Procedure

Step 1

Choose Configuration > Tags & Profiles > WLANs.

Step 2

Click a WLAN from the list of WLANs.

Step 3

Click the Advanced tab.

Step 4

Under the Max Client Connections settings, enter the client limit for Per WLAN, Per AP Per WLAN, and Per AP Radio Per WLAN.

Step 5

Click Update & Apply to Device.

Configuring Client Limit Per WLAN (CLI)

Procedure

  Command or Action Purpose

Step 1

enable

Example:

Device# enable

Enters privileged EXEC mode.

Step 2

configure terminal

Example:

Device# configure terminal

Enters global configuration mode.

Step 3

wlan wlan-name

Example:

Device(config)# wlan ramban

Specifies the WLAN name.

Step 4

client association limit maximum-clients-per-WLAN

Example:

Device(config-wlan)# client association limit 110

Configures the maximum number of clients that can be associated to the given WLAN.

Step 5

client association limit ap max-clients-per-AP-per-WLAN

Example:

Device(config-wlan)# client association limit ap 120

Configures the maximum number of clients that can be associated to an AP in the WLAN. The valid range is between 0 and 1200 clients. The default value is 0.

Note

 

A Cisco Catalyst 9136 Series AP can support a maximum of 1200 clients.

Step 6

client association limit radio maximum-clients-per-AP-radio-per-WLAN(0—400)

Example:

Device(config-wlan)# client association limit radio 100

Configures the maximum limit of clients that can be associated to an AP radio in the WLAN. The valid range is between 0 to 400 clients. The default value is 200.

Note

 

A Cisco Catalyst 9136 Series AP radio can support a maximum of 400 clients.

Step 7

end

Example:

Device(config)# end

Returns to privileged EXEC mode. Alternatively, you can also press Ctrl-Z to exit global configuration mode.

Step 8

show wlan id wlan-id

Example:

Device#  show wlan id 2

Displays the current configuration of the WLAN and the corresponding client association limits.

Configuring Client Limit Per AP (GUI)

Procedure

Step 1

Choose Configuration > Tags & Profiles > AP Join.

Step 2

Click Add.

Step 3

In the General tab, enter the name and description of the corresponding AP join profile.

Step 4

Click the Client tab.

Step 5

In the Maximum Client Limit field, enter the maximum client associations per AP. The valid values are between 0 and 1200. The default value is 0.

Step 6

Click Apply to Device.

Configuring Client Limit Per AP (CLI)

Procedure

  Command or Action Purpose

Step 1

configure terminal

Example:

Device# configure terminal

Enters global configuration mode.

Step 2

ap profile ap-profile-name

Example:

Device(config)# ap profile ap-profile-name

Configures an AP profile and enters AP profile configuration mode.

Step 3

association-limit max-client-connections

Example:

Device(config-ap-profile)# association-limit 200

Configures the maximum client connections per AP. The default value is 0.

Note

 

A Cisco Catalyst 9136 Series AP can support a maximum of 1200 clients.

Step 4

end

Example:

Device(config)# end

Returns to privileged EXEC mode. Alternatively, you can also press Ctrl-Z to exit global configuration mode.

Configuring Client Limit Per Radio (GUI)

Procedure

Step 1

Choose Configuration > Tags & Profiles > RF/Radio.

Step 2

In the RF tab, click the required RF profile name from the displayed list of RF profiles.

The Edit RF Profile page is displayed.

Step 3

Click the Advanced tab.

Step 4

Under the High Density Parameters section, in the Max Clients field, enter the maximum number of client connections per AP radio. The valid range is between 0 and 400. The default value is 200 client connections.

Step 5

Click Update & Apply to Device.

Configuring Client Limit Per Radio (CLI)

Procedure

  Command or Action Purpose

Step 1

configure terminal

Example:

Device# configure terminal

Enters global configuration mode.

Step 2

ap dot11 {24ghz | 5ghz | 6ghz} rf-profile rf-profile-name

Example:

Device(config)# ap dot11 6ghz rf-profile  rf-profile-name

Configures an RF profile and enters RF profile configuration mode.

Step 3

high-density clients count maximum-client-connections <0-400>

Example:

Device(config-rf-profile)# high-density clients count 200

Configures the maximum number of client connections per AP radio. The valid range is between 0 and 400. The default value is 200 client connections.

Note

 

A Cisco Catalyst 9136 Series AP radio can support a maximum of 400 clients.

Step 4

end

Example:

Device(config)# end

Returns to privileged EXEC mode. Alternatively, you can also press Ctrl-Z to exit global configuration mode.

Verifying Client Limit

To verify client limit in local mode, run the following command:

Device# show wireless stats client delete reasons | sec Max
Maximum client limit reached on AP                  : 0
Maximum client limit reached on AP per wlan         : 0
Maximum client limit reached on AP radio per wlan   : 0
Maximum client limit reached on AP radio            : 0

To verify client limit in the FlexConnect central authentication mode, run the following command:

Device# show wireless stats client delete reasons | sec max
AP limiting maximum client per AP                : 0
AP limiting maximum client per AP radio per wlan : 0
AP limiting maximum client per AP radio          : 0

Was this Document Helpful?

FeedbackFeedback

Contact Cisco