The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The Volume Metering feature allows you to configure the interval at which an access point (AP) updates client accounting statistics to the controller and in turn to the RADIUS server. Currently, the report is sent from an AP to the controller every 90 seconds. With this feature, you can configure the time from 5 to 90 seconds. This helps reduce the delay in accounting data usage by a device.
Follow the procedure given below to configure volume metering:
| Command or Action | Purpose | |
|---|---|---|
|
Step 1 |
configure terminal Example: |
Enters global configuration mode. |
|
Step 2 |
ap profile profile-name Example: |
Configures an AP profile and enters ap profile configuration mode. |
|
Step 3 |
dot11 24ghz reporting-interval reporting-interval Example: |
Configures the dot11 parameters. |
|
Step 4 |
dot11 5ghz reporting-interval reporting-interval Example: |
Configures the dot11 parameters. |
|
Step 5 |
exit Example: |
Returns to global configuration mode. |
|
Step 6 |
aaa accounting update periodic interval-in-minutes Example: |
Sets the time interval (in minutes) at which the controller sends interim accounting updates of the client to the RADIUS server. |
|
Step 7 |
exit Example: |
Exits configuration mode and returns to privileged EXEC mode. |
Feedback