Country Codes

Information About Country Codes

Controllers and access points are designed for use in many countries with varying regulatory requirements. The radios within the access points are assigned to a specific regulatory domain at the factory (such as -E for Europe), but the country code enables you to specify a particular country of operation (such as FR for France or ES for Spain). Configuring a country code ensures that each radio’s broadcast frequency bands, interfaces, channels, and transmit power levels are compliant with country-specific regulations.

Information About Japanese Country Codes

Country codes define the channels that can be used legally in each country. These country codes are available for Japan:

  • J2: Allows only -P radios to join the controller

  • J4: Allows 2.4G JPQU and 5G PQU to join the controller.

Prerequisites for Configuring Country Codes

  • Generally, you should configure one country code per device; you configure one code that matches the physical location of the device and its access points. You can configure up to 200 country codes per device. This multiple-country support enables you to manage access points in various countries from a single device.

  • When the multiple-country feature is used, all the devices that are going to join the same RF group must be configured with the same set of countries, configured in the same order.

  • Access points are capable of using all the available legal frequencies. However, access points are assigned to the frequencies that are supported in their relevant domains.

  • The country list configured on the RF group leader determines which channels the members will operate on. This list is independent of which countries have been configured on the RF group members.

  • For devices in the Japan regulatory domain, you should have one or more Japan country codes (JP, J2, or J3) configured on your device at the time you last booted your device.

  • For devices in the Japan regulatory domain, you should have one or more Japan country codes (J2, or J4) configured on your device at the time you last booted your device.

  • For devices in the Japan regulatory domain, you must have at least one access point with a -J regulatory domain joined to your device.

  • You cannot delete any country code using the configuration command wireless country country-code if the specified country was configured using the ap country list command and vice-versa.

Configuring Country Codes (GUI)

Procedure

Step 1

Choose Configuration > Wireless > Access Points > Country.

Step 2

On the Country page, select the check box for each country where your access points are installed. If you selected more than one check box, a message is displayed indicating that RRM channels and power levels are limited to common channels and power levels.

Step 3

Click Apply.

Configuring Country Codes (CLI)

Procedure

  Command or Action Purpose

Step 1

enable

Example:

Device# enable

Enters privileged EXEC mode.

Step 2

show wireless country supported

Example:

Device# show wireless country supported

Displays a list of all the available country codes.

Step 3

configure terminal

Example:

Device# configure terminal

Enters global configuration mode.

Step 4

ap dot11{ 24ghz| 5ghz } shutdown

Example:

Device(config)# ap dot11 5ghz shutdown

Disables the 802.11b/g network, if you use 24ghz.

Disables the 802.11a network, if you use 5ghz.

Step 5

ap country country_code

Example:

Device(config)# ap country IN

Configures country code on the controller, so that access points joining controller matches the country code and its corresponding regulatory domain codes for the AP.

Note

 

More than one country code can be configured.

Step 6

wireless country country_code

Example:

Device(config)# wireless country IN

Configures 200 country codes per device.

Note

 

This CLI is applicable for deployments having more than 20 countries.

Step 7

exit

Example:

Device(config)# exit

Returns to privileged EXEC mode.

Step 8

show wireless country configured

Example:

Device# show wireless country configured

Displays the configured countries.

Step 9

show wireless country channels

Example:

Device# show wireless country channels

Displays the list of available channels for the country codes configured on your device.

Note

 

Perform Steps 9 through 17 only if you have configured multiple country codes in Step 6.

Step 10

configure terminal

Example:

Device# configure terminal

Enters global configuration mode.

Step 11

no ap dot11 { 24ghz | 5ghz} shutdown

Example:

Device(config)# no ap dot11 5ghz shutdown

Enables the 802.11b/g network, if you use 24ghz.

Enables the 802.11a network, if you use 5ghz.

Step 12

ap name cisco-ap shutdown

Example:

Device# ap name AP02 shutdown

Disables the access point.

Note

 

Ensure that you disable only the access point for which you are configuring country codes.

Step 13

configure terminal

Example:

Device# configure terminal

Enters global configuration mode.

Step 14

ap name cisco-ap country country_code

Example:

Device# ap name AP02 country US

Assigns each access point with a country code from the controller country code list.

Note

 

  • Ensure that the country code that you choose is compatible with the regulatory domain of at least one of the access point’s radios.

  • Disable the access point before changing country code.

Step 15

ap name cisco-ap no shutdown

Example:

Device# ap name AP02 no shutdown

Enables the access point.

Configuration Examples for Configuring Country Codes

Viewing Channel List for Country Codes

This example shows how to display the list of available channels for the country codes on your device: 

Device# show wireless country channels

Configured Country........................: US - United States
KEY: * = Channel is legal in this country and may be configured manually.
     A = Channel is the Auto-RF default in this country.
     . = Channel is not legal in this country.
     C = Channel has been configured for use by Auto-RF.
     x = Channel is available to be configured for use by Auto-RF.
  (-,-) = (indoor, outdoor) regulatory domain allowed by this country.
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
802.11bg         :
Channels         :                  1 1 1 1 1
                  1 2 3 4 5 6 7 8 9 0 1 2 3 4
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
(-A ,-AB ) US    : A * * * * A * * * * A . . .
Auto-RF          : . . . . . . . . . . . . . .
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
802.11a          :                        1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Channels         :3 3 3 4 4 4 4 4 5 5 6 6 0 0 0 1 1 2 2 2 3 3 4 4 5 5 6 6
                  4 6 8 0 2 4 6 8 2 6 0 4 0 4 8 2 6 0 4 8 2 6 0 9 3 7 1 5
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
(-A ,-AB ) US    : . A . A . A . A A A A A * * * * * . . . * * * A A A A*
Auto-RF          : . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
4.9GHz 802.11a   :
Channels         :                  1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2
                  1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
US (-A ,-AB )    : * * * * * * * * * * * * * * * * * * * A * * * * * A
Auto-RF          : . . . . . . . . . . . . . . . . . . . . . . . . . .